ADDN ALTN TO SINGLE ENTRY BPs QTY 08 AT AF STN NALIYA

Amount

Demolition of RCC, roofs (other than ), beams staircases,landing,chajjas and similar works complete all as specified & directed.

Demolition of Brick/stone/masanory work built in cement mortar in any description complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness complete all as specified & directed.

Rough excavation not exeeding 1.5 meter depth and getting in any type of soil from blast pen (upto 6.5 mtr height) and getting out hard soil and deposited complete all as specified and directed and Removing excavated material n exc. 50 m and depositing where directed. Note: Qty is taken for blast pens top and incuding surrouding soil only.

M&L for applying one coat of bituminous oil based primer @ .25 Liter/Sqm conforming to IS 338-1986 over incl rendering 15 mm thick in CM 1:4 on concrete surface of roof, finish the surface even and smooth without using extra cement and providing necessary slop including using WPC @ 3% or as per manufacturur insturctions followed by a layer of APP based polymer modified membrane reinforced with polyster non woven fabric (weighing 3.5 kg/sqm (minimum) and 3 mm thickness with white mineral gravel finish laid on primed surface by torch application with side overlap 100 mm and ends over laps 100 mm joint sealed property as per manufacture instruction complete all as specified & directed.

M&L for PCC 1:4:8 type D-2 (by using 40mm graded crushed broken stone aggregate) as in foundations filling and mass concrete complete all as specified & directed.

M&L precast concrete block masonry (1:5:8) with solid blocks exc 10cm width and setting in CM (1:6) complete all as specified & directed.

Excavation over areas n exc 1.5mtr depth and getting out hard soil complete all as specified & directed.

M&L hardcore of gauge nexc 63mm deposited spread and levelled in layers nexc 15cm thick watered and rammed to a true surfaces complete all as specified & directed.

M&L 75 mm thick cement concrete type D-2 1:4:8 (by using 40mm graded crushed broken stone aggregate) over hardcore complete all as specified & directed.

M&L 75 mm thick PCC 1:2:4 type B-2 (by using 20mm graded crushed broken stone aggregate) in floor finished even and smooth with spikes rolling to to surfaces or making impressions of expanded metal, whilst the concrete is green including forming 5mm thick expansion joints complete all as specified & directed.

Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for 100mm thick slab complete all as specified & directed.

Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM complete all as specified & directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on newly concrete surface/pcc block wall including finished even & smooth without using extra cement on ceiling complete all as specified & directed.

M&L for rendering 5 mm thick in cement mortar 1:4 on concrete surface of old ceiling surface without using extra cement complete all as specified & directed.

M&L for rendering 10mm thick in cement mortar 1:4 on concrete surface/pcc block wall including finished even & smooth without using extra cement complete all as specified & directed.

M & L for preparing new plastered surfaces of walls etc & applying two coats of white wash over a coat of primer complete all as specified & directed.

M & L for preparation of newly plastered surfaces of ceiling and two coats of white washover a coat of primer complete all as specified & directed.

S&F formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified & directed.

S&F TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed 0.9mm dia) complete all as specified & directed.

S&F MS TMT (Thermo mechanically treated) steel bars 6 to 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping to columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Removing the existing loose concrete carefully by low impact high frequency hammer without damaging existing concrete including cleaning the surface by air jet and cleaning the rusted reinforcement and exposed surface by wire brush mechanical device and applying alkaline rust remover solution of approved make and quality with cotton waste swab to reinforcement and applying anticorrosion epoxy paint on steel surfaces and allowing to dry the same for 24 hour complete all as specified & directed.

M&L RCC M-30 Gde design mix concrete in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed.

S&F nylon net of bird proofing for shed/ storage accn/ soft pen and possess following properties : (a) The burst strenght upto 44 pounds. (b) Shall meet ISO : 1806 protocols. (c) 3/4" (three fourth inch), mess netting. (d) Thickness 0.071" thick (6 strands, each 0.012" thick). (e) Quality control : filaments are twisted and knotted pressure stretched and tightened. (f) Break strenght : 52 lbs/ 2316 Kgs per strand. (g) Chemical properties : polyethylene, a paraffin hydrocarbon, is chemically inert, flame retardant and highly resistant to most chemicals at temperatures. (h) High resistance to acids and alkaloids at all concentrations. (i) High temperature : 210-239 Degree, F/100-115 Degree. (j) Low temperature : 139 to 166 Degree, F/-95 to 11.0 Degree C including all fitting such as rolling pully, iron strips,rope for conrolling net, nails etc. all as per manufacturer's instructions complete all as specified & directed.

M &L Cement concrete type B-2 1:2:4 (by using 40mm graded crushed broken stone aggregate) in surface channels & drains complete all as specified & directed.

Removal of demolished material to distane exc 1.5 km not exc 5.00 Km complete all as specified & directed.

Removing excavated materials exceeding 1.5 Km and n exc 5 Km, depositng where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.

Excavating over area exc 1.5 mtr deep and not exc 3.0 mtr deep and getting out in hard/dense soil complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified & directed.

Removing excavated material (soil) exceeding 1.50Km but n.exc 5 Km and depositing where directed out side of MoD land complete all as specified & directed.

M&L PCC 1:3:6 type C-2 (by using 40mm graded crushed broken stone aggregate) as in foundation, filling and mass concrete complete all as specified & directed.

S&F formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter or to batter rough finished flat surface of concrete complete all as specified & directed.

S&F formwork to faces of walls, retaining walls, parapet, drain,and etc vertical or to batter rough finished flat surface of concrete complete all as specified & directed.

M&L RCC M-30 design mix (by using 20mm graded crushed broken stone aggregate) as in footing, foundation plinth beam and mass concrete complete all as specified & directed.

Description all as per Srl item No 34.00 here-in-before but in wall ,retaining wall,basement wall etc

Description all as per Srl item No 20.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders

S&F PVC pipe 110 mm dia single socketed in any length in RCC retaining wall as in weep holes complete all as specified & directed.

S&F PVC jalli ( grating ) 140 mm dia fixed on the masonry/concrete wall of any height and in any position to cover the weep holes fixed with nails complete all as specified & directed.

M &L for preparation of new plastered surfaces of walls and applying two coats of camouflage painting with acrylic emulsion paint over a coat of primer etc complete all as per specified and directed.

M&L for Hand packing of stones or broken stones and boulders (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified and as directed.

Forming embankment including raising (or lowering) earth, spreading in layers n exc. 30 cm thick, watering, ramming/rolling and finishing to required size etc n exc. 1.5 mtrs high from base, compaction of earth filling shall be done under optimum moisture conditions brought out soil from out side MD land complete all as specified and as directed.

All as per Sl item No 41.00 above but height exceeding 1.50 m and n exc. 3.00m.from the base, compaction of earth filling shall be done under optimum moisture conditions brought out soil from out side MD land complete all as specified and as directed.

All as per Sl item No 41.00 above but height exceeding 3.00 m and n exc. 4.50m.from the base compaction of earth filling shall be done under optimum moisture conditions brought out soil from out side MD land complete all as specified and as directed.

All as per item No 41.00 above, but height exc 4.50m and n exc 6.0 mtr from the base base compaction of earth filling shall be done under optimum moisture conditions brought out soil from out side MD land complete all as specified and as directed.

Taking down carefully point wiring complete of any type (batten / surface conduit for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces complete all as specified and directed.

Taking down carefully by unscrewing from boards/outlet boxes, DBs with MCBs complete all as specified & directed.

M&L for point wiring for one light/Fan/socket 5Amps point on independant board controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn through and including heavy duty ERW conduit not less than 20 mm dia concealed type , including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly complete all as specified and directed. Note : Point wiring will be done from Main DB. Length of point wiring may be beyond 5 mtrs and no extra amount for long point wiring shall be gievn.

M&L for sub main wiring with 2 run single core multistranded copper conductor cable, of size 1.5 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including heavy duty ERW steel conduit not less than 20 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 1.5 Sqmm, PVC insulated, unsheathed, fire retardant as earth wire, fixed on wall / ceiling complete including taking down old sub main wiring. Note: 02 Runs of main cable and one run earth wire with conduit will be measured as one RM for payment.

M&L for sub main wiring with 2 run single core multistranded copper conductor cable, of size 6Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including heavy duty ERW steel conduit not less than 20 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6 Sqmm, PVC insulated, unsheathed, fire retardant as earth wire, fixed on wall / ceiling complete including taking down old sub main wiring. Note: 02 Runs of main cable and one run earth wire with conduit will be measured as one RM for payment.

S&F kiosk box (junction box) of size 200 x 140 x 95mm for luminaries, weather proof made out of PVC/HDPE /FRP housing fire retardant, non fusing, shock & rust proof, single piece moulded and cover with hinged door, pole mounting type comprising of MCB SP 10 Amps fixed on PCC foundation with screws complete all as specified and as directed.

S&F flame proof, weather proof type, distribution board, Aluminum die cast alloy in LM6 material sheet metal enclosure including MCB 63 Amp TPN (incomer) and 07 Nos SP 6-32 Amps (out going), terminal, wiring and including all fitting accessories etc complete all as specified and as directed.

S&F flame proof, weather proof distribution board, Aluminum die cast alloy in LM6 material sheet metal enclosure including MCB 40 Amp, TPN (incomer) and 06 Nos SP 6-32 Amp (out going) terminal, wiring and all fitting accessories etc complete all as specified & directed.

S&F new generation energy saving and environmental friendly long life LED street light fittings 80 watts made up of pressure die cast aluminum housing with high efficient LED as lighting source with toughened glass having IP66 protection and impact resistance of IK07. Model No: ENDURACITYLINERNEOMPSL80WLED757PASYBOTG of make Havells or equivalent model & make of C&S/CG/PHILLIPS/ SURYA/SYSKA/WIPRO/HPL

S&F LED flood Light fitting 100 watt, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminum IP66 flood light, suitable for highlighting architectural facade and general purpose lighting and connected items Cat Part No JETAIRISFLS 100WLED757SYMLT G of Make Havells or equivalent model & make of PHILLIPS/OSRAM/WIPRO/BAJAJ/CG/SYSKA/ HAVELLS/SURYA/C&S

S&F LED fitting 60watt flame proof fiiting well glass in die cast aluminum housing with heat resistant toughened glass, IP65 protected and including all accessories, connecting up with flexible copper conductor 1.5 Sqmm 3core covered with flexible metal conduit of suitable size Cat part No FWL1315-60-CDL Make Crompton LED or equivalent model & make of PHILLIPS/OSRAM/WIPRO/BAJAJ/CG/SYSKA/ HAVELLS/SURYA/C&S complete all as specified & directed.

Supply and fix in repairs brackets for street light fitting made out of 32 mm dia G.I. Pipe light grade in shape and angle as directed not exceeding 1.5 mtrs in length fixed to pole with suitable size of M.S. clamps made of M.S flat of size 40 mm x 3 mm, 2 Nos, M.S nut & bolt with cup washers and dismantling old rusted/unserviceable bracket with its rusted clamps and nut bolts complete all as specified & directed.

S&F switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6,16A, 250V, 2P+ earth complete all as specified and directed

Supply, laying & testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cable, (heavy duty), 1100 volts grade with stranded aluminum conductor of size 6 Sqmm 3Core laid in trenches, fixing in DB with suitable lugs (for Taxi track lighting) complete all as specified & directed.

S&L connecting XLPE insulated, armoured, heavy duty electric cable multi stranded aluminum conductors, 1100V grade, of size 50 Sqmm 3.5 core with proper size of lugs and laid in trenches / ducts / through GI pipe / fixed to poles etc complete all as specified and directed. Note: Excavation earthwork, cable covers, sand cushioning and GI protection pipe shall be measured and paid separately under relevant item.

M&L for pre-cast cement concrete block masonry type C-1 (1:3:6) by using 20mm graded stone aggregate with hollow blocks, exc.10 cm in width and setting in mortar 1:6 complete all as specified and as directed (Taxi Track light post)

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft and loose soil complete all as specified & directed.

Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cable for cushioning of cable complete all as specified.

Supply & laying of reinforce Precast concrete cover of class LV type 1 flat size 250 mm x 150 mm x 40mm for protection for cable complete all as specified & directed.

Laying only reinforce Precast concrete cover of class LV type 1 flat size 250 mm x 150 mm x 40mm for protection for cable complete all as specified & directed.

Returning, filling-in, including spreading, watering and well ramming in layers not exceeding 25 cm thick each, in soft /loose soil complete all as specified & directed.

Removal of excavated surplus soil to a distance not exc 50m and depositing where directed complete all as specified & directed.

S&F GI earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc of size 25x4mm complete all as specified & directed.

S&F copper earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc of size 32x6mmmm complete all as specified & directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit with adequate quantity of charcoal and dust and common salt, not less than 2.25 mtr deep below ground level connected to & using galvanised iron strip 25×4mm as earthing lead drawn through GI protection pipe of size ordered specified for protection of earthing lead from earth electrode to test point/main DB from mechanical injury or tempering by means of nuts and bolt check nuts and washers of galvanised iron sheet all as shown in electrical plate No 5 of SSR Part - I and connected to earthing test point complete including testing filling of adequate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil upto 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made out of 6 mm dia MS bar water pipe with wire mesh and connecting with earth point testing etc complete all as specified and directed. Note:- On testing after completion of earthing if desired earth resistance is not achieved, the earthing will be redone at no extra cost to obtain the desired earth values <5 ohms.

M&L for chemical earthing with copper earth plate electrode 900x600x5mm thick buried directly in ground vertically to a depth not less than 3.0 mtrs below ground level with top edge of earth plate at a depth not less than 1.5mtr below normal ground level connecting to and including copper strip 32x6mm as earth lead up to 15mtr long fixed by means of bolts nuts check nuts and washer etc of galvanized iron or steel including provn of GI protection pipe light grade of 40mm bore and connected to earth strip to test point all as shown as in electrical plate No 5 of SSR Part-I 2009 and as specified or indicated and testing on completion including necessary excavation and earth work in any type of soil PCC 1:3:6 type C-1 chamber precast slab 50mm thick in cement concrete (1:2:4) type B-1 (Reinforced with welded steel wire fabric (XPM) of wt not less than 4Kg/Sqmm with frame funnel with watering pipe of 15mm bore medium grade wire mess and lugs test point including salt (150Kgs appx) Coal (50Kgs appx) and Magnesium sulphate (100Kgs appx) including returning filling etc. Note: Earth continuity copper strip beyond 7.5m will be measured and paid separately. On completion the earth resistance shall be carried out. Earth resistance should be less than 1 ohm. Failing to achieve desired value earthing will be redone at no extra cost.

Krishna Engineering

Venus Engineering

Vijay Construction Co

Mepani Construction Company

M/s Gujarat Construction Company