PROVN OF STATIC WATER TANK ALONGWITH PUMP AND STD ACCESSORIES FOR CGOM 2X25000LTR AT CGRA NALIYA UNDER AGE (I) (CG) JAKHAU

Amount

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, depth exc 1.5m and n exc 3.0m deep and getting out in soft/loose soil complete all as specified and directed.

M&L for cement concrete Type C2 1:3:6 (40 mm graded aggregate) in foundation filling and mass concrete etc complete all as specified and directed.

M&L for reinforced cement concrete (design mix) M-30 (20mm graded aggregates ) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for reinforced cement concrete (design mix) M-30 (20mm graded aggregates ) in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses foundations etc complete all as specified and directed.

M&L for reinforced cement concrete (design mix) M-30 (20mm graded aggregates ) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

M&L for reinforced cement concrete (design mix) M-30 (20mm graded aggregates ) in beams, cantilevers, bressumers, lintels over 1.5 clear span etc complete all as all as specified and directed.

Use & waste of formwork to sides of concrete foundations, rough finished surfaces of flat concrete, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, etc complete all as specified and directed.

Use & waste of formwork to walls, retaining walls, basement walls, ballast walls and the like including attached pilasters and buttresses and similar work vertical or to batter, flat, fair finished surface of concrete etc complete all as specified and directed.

Use & waste of formwork to fair finished surfaces of flat concrete, edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, etc complete all as specified and directed.

Use & waste of formwork to fair finished surfaces of flat concrete, soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), etc complete all as specified and directed.

M & L for CRS bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

M&L for CRS bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

M&L for rendering 10mm thick to fair faces of brick or concrete surface in cement mortar 1:3 including mixing only integral water proofing compound @3% by weight of cement or as per manufacturer's instruction, finished even and smooth (without using extra lime or cement) complete all as specified and directed.. Note : a) Integral water proofing compond will be measured and paid separately.

M&L for rendering 10mm thick to fair faces of brick or concrete surface in cement mortar 1:4 including mixing only integral water proofing compound @3% by weight of cement or as per manufacturer's instruction, finished even and smooth (without using extra lime or cement) complete all as specified and directed. Note: Integral water proofing compond will be measured and paid separately.

Supply only integral waterproofing compound.

M&L for 3mm x 250mm PVC water bar for construction joint complete all as specified and directed.

M&L for framed work such as grills, gratings, etc with ends of bars shouldered and or riveted or forged into spikes, framed guards bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410 Gde E-250 and complete all as specified and directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25cm in Soft/loose soil complete all as specified and directed.

Removing excavated material (soils) distance exc. 250m and n.exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Removing excavated material (soils) distance n.exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for Hard core of gauge n.exc 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone or boulders.

Material and labour for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in plinth protection finished fair and even without using extra cement, complete all as specified and as directed.

Material & Labour for applying Two coats of 100% Premium acrylic Emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed.

M&L for preparation of new steel surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer all complete.

Supply and laying of unplasticised PVC pipes of pressure rating 10kgf/cm2 laid in trenches/walls of size 50mm dia complete all as specified and directed.

Supply and laying of unplasticised PVC pipes of pressure rating 10kgf/cm2 laid in trenches/walls of size 40mm dia complete all as specified and directed.

Supply and laying of unplasticised PVC pipes of pressure rating 10kgf/cm2 laid in trenches/walls of size 25mm dia complete all as specified and directed.

Supply and fixing of foot valve(Ball type) confirming to IS 4038 of size 50mm dia complete all as specified and directed.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 40 mm dia complete all as specified and as directed.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 50 mm dia complete all as specified and as directed.

Supply, install, testing and commissioning of Monoblock Pumpsets, electric driven, 3Ph , 415 V complete of 5 HP capacity inclusive of starter suitable,cable from Pump to starter ,other minor spares required for commissioning and testing for pumpset and PCC foundation duly grouted complete all as specified and as directed. Make :- Kirloskar KDS 520+ or equivalent capacity in any other approved make. Size for Inlet/Outlet= 50mm/50mm

Supply, installation, testing and commissioning Control Panel, Outdoor type, dust and vermin proof, totally enclosed, platform mounted, factory made having front openable shutter with locking arrangement made out of CRCA steel sheet 3.15 mm thick with MS angle iron frame work of size 40 mm x 40 mm x 6 mm thick, duly painted all as specified including necessary foundation bolts, PCC (1:2:4), type B-1 platform of suitable size for mounting the panel, suitable for 415 Volts, 50 Hz, three phase, 4 wire system complete with internal wiring with copper conductor and including the following accessories:- (i) MCB TPN , 32 Amps, 'C' series, 415 volts, 50 Hz, rupturing capacity 16 KA, Make. L&T/Legrand/Schnieder - 01 No. (ii) Digital Ammeter 0-50 amp - 01 Nos. (iii) Digital Voltmetr 0-500 Volt - 01 Nos. (iv) LED indicating lamps with colour Red, Yellow, Blue - 01 Set of three (v) space for 2 nos of Suitable starter three phase (heavy duty) suitable Pumpset

High density polyethylene pipes of dia 50mm (HDPE) & pressure rating 6 kgf/cm2 laid in trenches or walls complete all as specified and as directed.

Material and labour in repair for earthing complete with galvanized earth plate electrode in 60 cm x 60 cmx 6 mm thick buried directly in ground vertically at a depth not less than 2.25 meter below ground level with top edge of earth plate at depth not less than 1.5 mtr below ground level connecting to and including GI strip 25 mm x 4 mm by means of GI bolts, nuts, check nuts and washer light grade 40 mm dia GI protection pipe and connected to equipment, GI pipe medium grade 20 mm dia for watering an including funnel wire mesh, RCC pit cover and PCC 1;2:4 type B-1 including Rocksalt, charcoal, excavation and earth work disposal of surplus soil shown as plate No 3 of SSR part - I 1991 and all as specified complete. Note : - The unit rate quoted shall deemed to have included for GI protection pipe, GI earth strip up to 7.5 mtr, GI water pipe, wire mesh , funnel , excavation, RCC pit cover complete.

M&L for fabrication and fixing canopy for protection of 2 nos of centrifugal pump made out of 40x40x6 mm angle iron and 2 mm thick sheet steel , structure size of 75x60x180 cm and roof size 80x65 cm with slope of 10 degree, painting with two coat of primer and one coat of synthetic enemel paint incl necessary PCC work fasteners , nut, bolt, washer etc complete all as specfified and directed.

Supply, laying & testing of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables(heavy duty) with stranded aluminium conductor, 1100 volts, grade cross setional area 35 sq mm, 3.5 core complete all as specified and as directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5 in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, laying cable / pipe etc n exc 10sqm on plan, and getting out in Soft/Loose soil, complete all as specified and directed.

Supplying & laying factory made unreinforced Precast concrete cover of class LV, type 1, flat, size 250 mm x 150 mm x40mm for protection for cable all as specified.

M&L for dry sand filling in cable trenches for protection of cables with two layers(ie. 7mm and 15mm thick) below and above cable and punned down to speicified thickness complete all as specified and as directed. Note: Punned down thickness shall only be measured for payment.

M&L forcutting existing pipe 50 mm dia and taking branch connection of PVC pipe with PVC/GI of 50mm sizes by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.

Supply and lay galvanised Iron pipes of Medium grade laid in trenches/ Walls of size 50mm dia bore as specified and as directed.

M&L for 40mm thick PCC 1:1.5:3, type A-0, using 12.5mm graded stone aggregate as in floor finished mixed with wateproofing compound complete all as specified and directed. Note: Water proofing compond will be measured and paid separately.

Krishna Engineering (BID ID -3317732)