Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAdmitted-Finance | ₹1.1 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.4 Cr+₹25.5 L (22.8%)Admitted-Finance | ₹1.4 Cr+₹25.5 L (22.8%) | L2 | Admitted-Finance |
| 3 | L3₹1.5 Cr+₹37.0 L (33.1%)Admitted-Finance | ₹1.5 Cr+₹37.0 L (33.1%) | L3 | Admitted-Finance |
| 4 | Not Admitted-Finance | - | - | Not Admitted-Finance Not qualified for AOC |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
2 Mar 2020, 3:00 pmClosed
Officer-in-Charge, FMU(V)
Fleet Maintenance Unit, C/o Fleet Mail Office, Naval Dockyard, Visakhapatnam-14
Repair Rate Contract (RRC) for Overhauling / Repairs of Diving Air and BASCCA Charging Compressors of ENC ships
2020_NAVY_323663_1
PC/301/DAC DATED 10 FEB 2020
Open Tender
Marine Services
Buy
1095 days
Fleet Maintenance Unit, Visakhapatnam
As per RFP
5 documents required · 5 mandatory
₹0
₹1 L
Yes
Fleet Maintenance Unit, Visakhapatnam
3 Jun 2020
10 Feb 2020
3 Mar 2020
10 Feb 2020
2 Mar 2020
10 Feb 2020
10 Feb 2020 - 2 Mar 2020
17 Feb 2020
Amount
First Year
Existing Services
Renewal of intake filter-compressor
Servicing of Intel/discharge valves
Chemical cleaning of inter cooler
Renewal of fly wheel
Renewal of PAS purifier cartridge
Testing of safety valve
Renewal of base frame
Renewal of belt guard
Renewal of AVM’S for base frame
Major overhaul of compressor
Major overhaul of engine
Renewal of charging hose with adaptor
Renewal of fuel filter
Renewal of fuel lines
Renewal of air intake filter-engine
Renewal of belts and alignment
Renewal of anti-vibration mounts-engine/compressor
Servicing of fuel injector
Servicing of fuel pump
Renewal engine head gasket
Renewal of recoil starting
Renewal of muffler
Painting of equipment
Repair/replacement of rocker and pushrod etc.
Renewal of pressure gauge
Repair/replacement of governor assembly
Renewal of piston
Renewal of piston ring
Renewal of piston pin
Renewal of liner
Renewal of head reed with control washer
Renewal of control valve
Renewal of front oil seal
Renewal of cooling coil
Renewal of crank bearing
Renewal of connecting rod bearing
Replacing of compressor oil
Replacing of joint packing kit
Repair to crank shaft including metal building up straightening, key slotting etc
Repair of exhaust muffler
Bore repairs
Dynamic balancing of crank shaft
Repair to diesel tank and leak testing
Repair/servicing of change over devise
Chemical cleaning/servicing/testing of purifier assembly
Chemical cleaning/servicing/testing of moisture separator assembly
Repair/overhaul of oil pump
Newly Added Services
Renewal of gasket set for engine
Servicing/repair of inlet/exhaust valve of engine
Pressure testing of relief valve 220/330 bar to 1.5 times working pressure
Repair/Pressure testing of non-return valve to 1.5 times working pressure
Renewal of filling valve 200/300 bar
Repair of base frame
Replacing of engine oil
Renewal of nozzle
Renewal of fuel pump delivery valve
Renewal of anti-skid mount for base frame
Renewal filling hose 200/300 bar
Repair of CYL head
Renewal filter housing
Renewal of switch over device assy
Renewal of male run T connector
Renewal of elbow fitting
Renewal of fitting connector
Renewal of fitting
Renewal of elbow safety valve
Renewal of manifold
Renewal of V belt pulley
Renewal of Inter cooler
Renewal of after cooler
Renewal of valve head assy 1st stage/ 2nd stage/ 3rd stage
Renewal of fan wheel
Renewal of intermediate separator
Renewal of pressure valve
Renewal of Intake valve
Pressure testing of safety valve 1st stage / 2nd stage / 3rd stage to 1.5 times working pressure
Pressure testing of moisture separator assembly to 1.5 times working pressure
Pressure testing of Inter/After coolers to 1.5 times working pressure
Pressure testing of pressure maintaining valve to 1.5 times working pressure
Pressure testing of filter housing to 1.5 times working pressure
Pressure testing of filling hoses to 1.5 times working pressure
Pressure testing of HP air connector and fitting to 1.5 times working pressure
Pressure testing of filling valve to 1.5 times working pressure
Pressure testing of pressure gauges to 1.5 times working pressure
Existing Spares
Major service kit
Air intake filter element
Purifier cartridge (spares) PAS 6S
O ring 49.5 X 3.0
Back up ring
1 Litre can anderol 555
Compressor block
PAS 6 purifier
Wedge belt SPA 1900
Charging hose with adaptor 1/8” BSP X 5/8 DIN
Anti-vibration mount
Fold way lifting handle
Intake filter
Pistons with ring
Connecting rod
Connecting rod bearing
Crank shaft
Crank shaft main bearing
Oil seal
Filling valve
Condensate valve (drain)
4 stages safety valve
Bleed valve
Pressure maintaining valve
Oil and water separator
Cartridge
V belt
Compressor bed mounts
Driver wheel key
Air intake hose and pre filter
Packing kit
Oil pump
Ring set
Oil ring
Bearing
Gasket set
Seal ring
Fuel injector
Oil filter element
Oil filter
Fuel pipe
Clamp
Fuel filter
Cartridge
Anti-vibration mount
Engine oil 5 Ltr
Valve guide
Valve oil seal
Muffler guard
Air cleaner element
Fuel injection pump
Piston with ring 0.25
Piston with ring 0.50
Connecting rod
Connecting rod bearing
Pin piston
Pin piston lock
Crank shaft
Main bearing
Oil seal
Cam shaft
Cam shaft bearing
Inlet valve
Exhaust valve
Oil filter
Crank key
Recoil unit
Exhaust muffler
Engine rubber mount
Frame mount
Frame handle
Intake filter
Oil pump
Fly wheel
PAS 6S purifier cartridge pink
PAS 9 filter cartridge pink(standard)
HP piston with ring
Safety valve 1st stage
Hp connecting rod
Major service kit V10 HAL
Fan blade multi-wing R.H 35 Deg X 106m Qty 01
Valve replacing kit
Connecting rod bearing B/E
Suction valve
Delivery valve
3rd stage cylinder
Gasket set 4S 12-60
Filling valve assy PN 300
Air intake filter assy
Compressor oil
Kit for PMV
Filling hose 01m
Speed governor assy
Retainer
Cleaner assy, Air
Pipe assy, Injection
Valve assy, Injection
Top cover assy
Ring set, piston 0.25
Ring set OS 0.50
Starter assy recoil
Tappet
Rod push
Spring valve
Nozzle assy, F. Injection
Fan case
Gasket, Cyl. head
Connecting rod 0.25
Connecting rod 0.50
Piston with ring
Newly Added Spares
Reed valve
Safety valve 2nd stage
Safety valve 3rd stage
Filling valve assy. PN 200 bar
Filling hose 200/300 bar
Pistons with ring 2nd stage
Pressure gauge 200/300 bar
Kit for NRV
Piston and sleeve assy
Safety valve 225 bar
Safety valve 330 bar
Kit for change over device
Male run T connector
Elbow fitting
Fitting connector
Fitting
Elbow safety valve
Manifold
V belt pulley
Inter cooler
After cooler
Valve head assy 1st stage / 2nd stage / 3rd stage
Fan wheel
Intermediate separator
Pressure valve
Intake valve
Filter housing
Switch over housing assy
Hex head bolt M8
Hex head bolt M10
Hex head nut M8
Hex head nut M10
Cap valve
Driving gear assy
Second Year
Existing Services
Renewal of intake filter-compressor
Servicing of Intel/discharge valves
Chemical cleaning of inter cooler
Renewal of fly wheel
Renewal of PAS purifier cartridge
Testing of safety valve
Renewal of base frame
Renewal of belt guard
Renewal of AVM’S for base frame
Major overhaul of compressor
Major overhaul of engine
Renewal of charging hose with adaptor
Renewal of fuel filter
Renewal of fuel lines
Renewal of air intake filter-engine
Renewal of belts and alignment
Renewal of anti-vibration mounts-engine/compressor
Servicing of fuel injector
Servicing of fuel pump
Renewal engine head gasket
Renewal of recoil starting
Renewal of muffler
Painting of equipment
Repair/replacement of rocker and pushrod etc.
Renewal of pressure gauge
Repair/replacement of governor assembly
Renewal of piston
Renewal of piston ring
Renewal of piston pin
Renewal of liner
Renewal of head reed with control washer
Renewal of control valve
Renewal of front oil seal
Renewal of cooling coil
Renewal of crank bearing
Renewal of connecting rod bearing
Replacing of compressor oil
Replacing of joint packing kit
Repair to crank shaft including metal building up straightening, key slotting etc
Repair of exhaust muffler
Bore repairs
Dynamic balancing of crank shaft
Repair to diesel tank and leak testing
Repair/servicing of change over devise
Chemical cleaning/servicing/testing of purifier assembly
Chemical cleaning/servicing/testing of moisture separator assembly
Repair/overhaul of oil pump
Newly Added Services
Renewal of gasket set for engine
Servicing/repair of inlet/exhaust valve of engine
Pressure testing of relief valve 220/330 bar to 1.5 times working pressure
Repair/Pressure testing of non-return valve to 1.5 times working pressure
Renewal of filling valve 200/300 bar
Repair of base frame
Replacing of engine oil
Renewal of nozzle
Renewal of fuel pump delivery valve
Renewal of anti-skid mount for base frame
Renewal filling hose 200/300 bar
Repair of CYL head
Renewal filter housing
Renewal of switch over device assy
Renewal of male run T connector
Renewal of elbow fitting
Renewal of fitting connector
Renewal of fitting
Renewal of elbow safety valve
Renewal of manifold
Renewal of V belt pulley
Renewal of Inter cooler
Renewal of after cooler
Renewal of valve head assy 1st stage/ 2nd stage/ 3rd stage
Renewal of fan wheel
Renewal of intermediate separator
Renewal of pressure valve
Renewal of Intake valve
Pressure testing of safety valve 1st stage / 2nd stage / 3rd stage to 1.5 times working pressure
Pressure testing of moisture separator assembly to 1.5 times working pressure
Pressure testing of Inter/After coolers to 1.5 times working pressure
Pressure testing of pressure maintaining valve to 1.5 times working pressure
Pressure testing of filter housing to 1.5 times working pressure
Pressure testing of filling hoses to 1.5 times working pressure
Pressure testing of HP air connector and fitting to 1.5 times working pressure
Pressure testing of filling valve to 1.5 times working pressure
Pressure testing of pressure gauges to 1.5 times working pressure
Existing Spares
Major service kit
Air intake filter element
Purifier cartridge (spares) PAS 6S
O ring 49.5 X 3.0
Back up ring
1 Litre can anderol 555
Compressor block
PAS 6 purifier
Wedge belt SPA 1900
Charging hose with adaptor 1/8” BSP X 5/8 DIN
Anti-vibration mount
Fold way lifting handle
Intake filter
Pistons with ring
Connecting rod
Connecting rod bearing
Crank shaft
Crank shaft main bearing
Oil seal
Filling valve
Condensate valve (drain)
4 stages safety valve
Bleed valve
Pressure maintaining valve
Oil and water separator
Cartridge
V belt
Compressor bed mounts
Driver wheel key
Air intake hose and pre filter
Packing kit
Oil pump
Ring set
Oil ring
Bearing
Gasket set
Seal ring
Fuel injector
Oil filter element
Oil filter
Fuel pipe
Clamp
Fuel filter
Cartridge
Anti-vibration mount
Engine oil 5 Ltr
Valve guide
Valve oil seal
Muffler guard
Air cleaner element
Fuel injection pump
Piston with ring 0.25
Piston with ring 0.50
Connecting rod
Connecting rod bearing
Pin piston
Pin piston lock
Crank shaft
Main bearing
Oil seal
Cam shaft
Cam shaft bearing
Inlet valve
Exhaust valve
Oil filter
Crank key
Recoil unit
Exhaust muffler
Engine rubber mount
Frame mount
Frame handle
Intake filter
Oil pump
Fly wheel
PAS 6S purifier cartridge pink
PAS 9 filter cartridge pink(standard)
HP piston with ring
Safety valve 1st stage
Hp connecting rod
Major service kit V10 HAL
Fan blade multi-wing R.H 35 Deg X 106m Qty 01
Valve replacing kit
Connecting rod bearing B/E
Suction valve
Delivery valve
3rd stage cylinder
Gasket set 4S 12-60
Filling valve assy PN 300
Air intake filter assy
Compressor oil
Kit for PMV
Filling hose 01m
Speed governor assy
Retainer
Cleaner assy, Air
Pipe assy, Injection
Valve assy, Injection
Top cover assy
Ring set, piston 0.25
Ring set OS 0.50
Starter assy recoil
Tappet
Rod push
Spring valve
Nozzle assy, F. Injection
Fan case
Gasket, Cyl. head
Connecting rod 0.25
Connecting rod 0.50
Piston with ring
Newly Added Spares
Reed valve
Safety valve 2nd stage
Safety valve 3rd stage
Filling valve assy. PN 200 bar
Filling hose 200/300 bar
Pistons with ring 2nd stage
Pressure gauge 200/300 bar
Kit for NRV
Piston and sleeve assy
Safety valve 225 bar
Safety valve 330 bar
Kit for change over device
Male run T connector
Elbow fitting
Fitting connector
Fitting
Elbow safety valve
Manifold
V belt pulley
Inter cooler
After cooler
Valve head assy 1st stage / 2nd stage / 3rd stage
Fan wheel
Intermediate separator
Pressure valve
Intake valve
Filter housing
Switch over housing assy
Hex head bolt M8
Hex head bolt M10
Hex head nut M8
Hex head nut M10
Cap valve
Driving gear assy
Third Year
Existing Services
Renewal of intake filter-compressor
Servicing of Intel/discharge valves
Chemical cleaning of inter cooler
Renewal of fly wheel
Renewal of PAS purifier cartridge
Testing of safety valve
Renewal of base frame
Renewal of belt guard
Renewal of AVM’S for base frame
Major overhaul of compressor
Major overhaul of engine
Renewal of charging hose with adaptor
Renewal of fuel filter
Renewal of fuel lines
Renewal of air intake filter-engine
Renewal of belts and alignment
Renewal of anti-vibration mounts-engine/compressor
Servicing of fuel injector
Servicing of fuel pump
Renewal engine head gasket
Renewal of recoil starting
Renewal of muffler
Painting of equipment
Repair/replacement of rocker and pushrod etc.
Renewal of pressure gauge
Repair/replacement of governor assembly
Renewal of piston
Renewal of piston ring
Renewal of piston pin
Renewal of liner
Renewal of head reed with control washer
Renewal of control valve
Renewal of front oil seal
Renewal of cooling coil
Renewal of crank bearing
Renewal of connecting rod bearing
Replacing of compressor oil
Replacing of joint packing kit
Repair to crank shaft including metal building up straightening, key slotting etc
Repair of exhaust muffler
Bore repairs
Dynamic balancing of crank shaft
Repair to diesel tank and leak testing
Repair/servicing of change over devise
Chemical cleaning/servicing/testing of purifier assembly
Chemical cleaning/servicing/testing of moisture separator assembly
Repair/overhaul of oil pump
Newly Added Services
Renewal of gasket set for engine
Servicing/repair of inlet/exhaust valve of engine
Pressure testing of relief valve 220/330 bar to 1.5 times working pressure
Repair/Pressure testing of non-return valve to 1.5 times working pressure
Renewal of filling valve 200/300 bar
Repair of base frame
Replacing of engine oil
Renewal of nozzle
Renewal of fuel pump delivery valve
Renewal of anti-skid mount for base frame
Renewal filling hose 200/300 bar
Repair of CYL head
Renewal filter housing
Renewal of switch over device assy
Renewal of male run T connector
Renewal of elbow fitting
Renewal of fitting connector
Renewal of fitting
Renewal of elbow safety valve
Renewal of manifold
Renewal of V belt pulley
Renewal of Inter cooler
Renewal of after cooler
Renewal of valve head assy 1st stage/ 2nd stage/ 3rd stage
Renewal of fan wheel
Renewal of intermediate separator
Renewal of pressure valve
Renewal of Intake valve
Pressure testing of safety valve 1st stage / 2nd stage / 3rd stage to 1.5 times working pressure
Pressure testing of moisture separator assembly to 1.5 times working pressure
Pressure testing of Inter/After coolers to 1.5 times working pressure
Pressure testing of pressure maintaining valve to 1.5 times working pressure
Pressure testing of filter housing to 1.5 times working pressure
Pressure testing of filling hoses to 1.5 times working pressure
Pressure testing of HP air connector and fitting to 1.5 times working pressure
Pressure testing of filling valve to 1.5 times working pressure
Pressure testing of pressure gauges to 1.5 times working pressure
Existing Spares
Major service kit
Air intake filter element
Purifier cartridge (spares) PAS 6S
O ring 49.5 X 3.0
Back up ring
1 Litre can anderol 555
Compressor block
PAS 6 purifier
Wedge belt SPA 1900
Charging hose with adaptor 1/8” BSP X 5/8 DIN
Anti-vibration mount
Fold way lifting handle
Intake filter
Pistons with ring
Connecting rod
Connecting rod bearing
Crank shaft
Crank shaft main bearing
Oil seal
Filling valve
Condensate valve (drain)
4 stages safety valve
Bleed valve
Pressure maintaining valve
Oil and water separator
Cartridge
V belt
Compressor bed mounts
Driver wheel key
Air intake hose and pre filter
Packing kit
Oil pump
Ring set
Oil ring
Bearing
Gasket set
Seal ring
Fuel injector
Oil filter element
Oil filter
Fuel pipe
Clamp
Fuel filter
Cartridge
Anti-vibration mount
Engine oil 5 Ltr
Valve guide
Valve oil seal
Muffler guard
Air cleaner element
Fuel injection pump
Piston with ring 0.25
Piston with ring 0.50
Connecting rod
Connecting rod bearing
Pin piston
Pin piston lock
Crank shaft
Main bearing
Oil seal
Cam shaft
Cam shaft bearing
Inlet valve
Exhaust valve
Oil filter
Crank key
Recoil unit
Exhaust muffler
Engine rubber mount
Frame mount
Frame handle
Intake filter
Oil pump
Fly wheel
PAS 6S purifier cartridge pink
PAS 9 filter cartridge pink(standard)
HP piston with ring
Safety valve 1st stage
Hp connecting rod
Major service kit V10 HAL
Fan blade multi-wing R.H 35 Deg X 106m Qty 01
Valve replacing kit
Connecting rod bearing B/E
Suction valve
Delivery valve
3rd stage cylinder
Gasket set 4S 12-60
Filling valve assy PN 300
Air intake filter assy
Compressor oil
Kit for PMV
Filling hose 01m
Speed governor assy
Retainer
Cleaner assy, Air
Pipe assy, Injection
Valve assy, Injection
Top cover assy
Ring set, piston 0.25
Ring set OS 0.50
Starter assy recoil
Tappet
Rod push
Spring valve
Nozzle assy, F. Injection
Fan case
Gasket, Cyl. head
Connecting rod 0.25
Connecting rod 0.50
Piston with ring
Newly Added Spares
Reed valve
Safety valve 2nd stage
Safety valve 3rd stage
Filling valve assy. PN 200 bar
Filling hose 200/300 bar
Pistons with ring 2nd stage
Pressure gauge 200/300 bar
Kit for NRV
Piston and sleeve assy
Safety valve 225 bar
Safety valve 330 bar
Kit for change over device
Male run T connector
Elbow fitting
Fitting connector
Fitting
Elbow safety valve
Manifold
V belt pulley
Inter cooler
After cooler
Valve head assy 1st stage / 2nd stage / 3rd stage
Fan wheel
Intermediate separator
Pressure valve
Intake valve
Filter housing
Switch over housing assy
Hex head bolt M8
Hex head bolt M10
Hex head nut M8
Hex head nut M10
Cap valve
Driving gear assy
SSB ENGINEERS
RAVI KRISHNA INDUSTRIAL SERVICES
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .