SPECIAL REPAIR TO BLDGS DAMAGED DUE TO BIPARJOY CYCLONE ADDN ALTN OF ROOF AT BLDG NO P 48 AND CERTAIN SANCTIONED WORK AT MIL STN BHUJ UNDER GE ARMY BHUJ

Amount

M & L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls Fixed with L-type or J-type or cranked hook bolts etc complete all as specified and directed.

S &F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with L or J hooks all as specified and directed.

Dismantling plain or corrugated A/C or steel sheeting, any gauge of any description and in any position as in roof coverings complete all as specified and directed.

M & L for water proofing treatment to roof slab by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.30 ltr /sqm and laying grit finish Actetic Polypropylene (APP) modified membrane pre-fabricated , reinforced with non woven polyester , of 3.50 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps etc over 10mm thick in CM 1:3 rendering and 40mm thick levelling course of PCC(1:2:4) also removing the existing roof treatment and hacking the smooth concrete surface incl discoonecting all sanitary fittings, tank connections and refiitting as it as after completion of roof treatment work complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate as 75mm thick finished fair complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls, finished even & smooth without unsing extra cement complete all as specified and directed.

Hacking out old broken glass of (Steel Windows / Aluminum Windows ) any thickness and any description from metal frame including 4 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.Note : Making all edges i.e. cill and jamb good by cement mortar 1:3

M & L powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm complete all as specified and directed.

S & F for 4.80 mm nominal thickness tinted glass panes in existing aluminium windows complete incl hacking out the damaged glass pane complete all as specified and directed.

S & F for 5.00 mm nominal thickness tinted glass panes in existing aluminium doors complete incl hacking out the damaged glass pane complete all as specified and directed.

M&L for false ceiling work of galvenised MS ceiling grid system 'UNLOCK" comprising of main runner 38mmx24mmx0.35mm cross tee 38mmx24mmx0.25mm and GI suspenders 4mm dia fixed to ceiling with and including supply and fixing water proof laminated gypsum ceiling board of size 600x600x12mm thick complete all as specified and directed and fixed as per manufacturers instructions including taking down existing ceiling of any discription and in any position and making good the disturb surfaces to match with the existing surfaces and finishes complete all as specified and directed.

Dismantling water tanks of any description and in any position , of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

Dismantling water tanks of any description and in any position , of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.

S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, white in colour hoisted and fixed in position with and including requireed tank connections fittings and fixtures in repairs complete all as specified and directed.

S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all tank connections fittings and fixtures in repairs complete all as specified and directed.

S&F in repair Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed complete all as specified and directed.

S&F (concealed / open) 16mm outer dia UPVC pipes SDR 11 & Plain UPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 15mm bore complete all as specified and directed.

S&F (concealed / open) 20mm outer dia UPVC pipes SDR 11 & Plain UPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 20mm bore complete all as specified and directed.

S&F 30 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels commenrcialface on both sides with lipping/frame to match with complete all as specified and directed.

S&F 100 mm long butt hinges stainless steel medium weight and fixed to wooden or PVC frame fixed in repairs by stainless steel screw as directed by Engr-in-Charge.

S&F aluminum handles cast type, anodized of 150 mm size complete all as specified and directed.

S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

Taking down existing wire mesh of (Steel Windows / Aluminum Windows ) any discription and in any position and supplying and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm (weight not less than 600 gms/per sqm) and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelam both side colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of prelam colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed by the Engr-in-Charge.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm one side prelam colour PVC sheet reinforced with MS square tube all as per specifications and as per drawing shown on SSR part II complete all as specified and directed.

S&F in repair Vitreous China, wash down water closet pan "Pedestal pattern" white including P TRAP OR S TRAP and connection to drain and to flush pipe(flushing cistern include) and anti syphonic pipe including all joints and making good the disturbed surfaces complete all as specified.

S & F in repair vitreous china wash basin,white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed .

Demolition of Cement concrete (reinforced)Concrete (Damaged Chajjas and Roof Projections at First Floor level and Roof Slab Level ) of any description and in any position including cutting of embedded TMT bars complete all as specified

M&L for RCC TypeB0 1:2:4 using (12.5mm graded aggregate) nominal mix for the First Floor and Second Floor Chajjas , Front Projections incl necessary Formwork and drilling holes to Existing RCC roof beam for inserting TMT bars and Casting complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F of Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete incl taking down the existing damaged doorcomplete all as specified and directed.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of old decorated surface and applying one coat of white wash on walls , complete all as specified and directed.

M&L for preparation of old decorated surface of ceiling and applying one coat of white wash on Ceiling complete all as specified and directed.

M & L for preparation of old decorated surface and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L for complete removal of existing treatment on walls and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for Preparation of old decorated surface of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L Preparation of old painted surface of wood and wood based material any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

S&F Roof trusses (framed) trusses purlins and fastening (etc.,angle, channel,tubular section,round pipe) or flat section including distance pieces, MS plates/ gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified incl taking down the existing complete

Taking down chowkats or frames n.exc 1.5 sqm with shutters without taking off shutters from the frame and removing to store complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm & n exc 4 sqm with shutters without taking off shutters from the frame and removing to store complete all as specified and directed.

Taking down existing shutters of any description and in any position exceeding 1.00 sqm but not exceeding 2 sqm each leaf complete all as specified and directed

Taking down existing chowkats or frames of any description and in any position not exceeding 2.50 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F of II 30mm Class Harwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board withcommercial faceveneers: suppliedand fitted to chowkats with hinges by welding to Iron door frame incl Preparation of Surface and applying two coats of synthetic enamel paint over a coat of pink primer Complete

S & F of 30mm Glazed and skeleton shutters,divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, prepared to receive glass, gauze, etc edges of framing plain, chamfered or rounded. fitted withcut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats with hinges by welding to Iron door frame incl Preparation of Surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L non skid ceramic Coloured tiles, 400mmx400mmx6mm to7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 incl dismantling existing tiles complete all as specified and directed.

M&L non skid ceramic Coloured tiles, 300mmx300mmx6mm to7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 incl dismantling existing tiles complete all as specified and directed.

M&L digital desiner glazed ceramic coloured tiles (300x450 mm) x6mm to 7mm thick on vertical surfaces such as skirting, dados, & riser to steps, set & jointed in neat cement slurry & pointed in coloured cement to match the tile colour laid over and including 10 mm thick backing coat in cement mortar (1:4) incl dismantling existing tiles complete all as specified and directed.

S&F in repairs heavy duty Stainless steel (Grade 305) curtain rods 20 to 25mm dia complete all as specified and directed.

S&F in repairs Stainless steel (Grade 305) brackets (Open ends) suitable for curtain rods of 20 to 25mm dia complete all as specified and directed.

S&F in repairs Stainless steel (Grade 305) brackets (Dead ends) suitable for curtain rods of 20 to 25mm dia complete all as specified and directed.

S&F in repairs Stainless steel (Grade 305) supports suitable for curtain rods of 20 to 25mm dia complete all as specified and directed.

S & F 18mm thick Prelaminated mfb board, exterior grade, prelaminated one side with decorative choce lamination & other side balancing white laimnation fixed with screws to timber frame work incl necessary hinges and handles complete required for cup boards complete all as specified and directed.

S&F in repair CP brass Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges fiting with 15mm dia pipe complete all as specified and directed

S&F in repair 10mm thick plain edge moulded cornor glass shelf fix with bracket of 300 mm wide all as specified and directed.

S&F in repair for shower rose brass chromium plated without swivel joints, 125 mm in size including fixing to steel pipe complete all as specified and directed fixed in repairs.

S&F in repair PVC (SWR) Nahani trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Stop valves, fancy type chromium plated ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified

S&F in repair Stop valves fancy type chromium plated with long shank and cup (concealed type) Stop valves, ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handlecomplete all as specified and directed.

S&F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F in repair stainless steel grating 150 x150mm size over floor trap anti cockros all as approved sample and directed by Engineer-in-Charge

S&F in repair 15mm bore pillar taps of cast copper alloy with capstan heads fancy type chromium plated screwed down high pressure with long swan shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair 2 Way Bib Cock complete all as specified and directed.

S&F in repair 15mm bore fancy type pillar tap cast copper alloy chromium plated, screwed down high pressure, iron pipe and fixed complete all as specified and directed.

S & F in repairs PVC mirror cabinet witth front mirror, size 330x430mm minimum 5 compartment all as per sample kept in GE office.

S&F in repairs swivel shower rose of any colour for fixing with 15 mm pipe etc complete all as specified and directed.

S&F in repairs shower arm 300mm or 450mm long complete all as specified and directed.

S&F in Repair Chromium plated Brass 60 cm longTubular towel rail complete all as specified and directed.

S&F stainless steel health faucet witrh 1 Mtr tube and hoock complete all as specified and directed.

S&F in repair toilet paper holder all as specified and directed by Engineer-in-Charge

S&F in repair towel ring complete all as specified and directed.

M& L for Complete removal of existing treatment and applying two coat of acrylic weather proof paint (Exterior grade) over a coat of primer Complete as all specified and directed.

M & L for preparation of newly plastered surfaces on walls and applying two coat of distemper oil emulsion over a coat of Primer complete all as specified and directed.

M & L for preparation of old/newly plastered surfaces on walls and applying one coat of 1mm thick wall care putty for both internal and External Surfaces to prepare the surface even and smooth complete all as specified and directed.

M&L for chequered cement concrete tiles 250mm x 250mmx 25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments including 15mm thick screed bed in CM 1:6 over and including 25mm thick PCC 1:3:6 type C1 using 20mm graded aggregate as sub base complete all as specified and directed.

Supply and lay pipe uPVC pipe including fittings of size 25 mm (1.0") dia complete all as specified and directed

M&L for cutting of existing DI/CI pipe line in position for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including necessory exvation and earthwork, dewatering etc,if any involed for 50 / 100 mm bore of pipes complete all as specified and directed

Supply and fix ball valve 25mm dia including all fittings all as specfied and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick in soil complete all as specified and directed.

Removing surplus soil obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting paint complete all as specified and directed.

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring for One light/fan/exhaust fan/buzzer point controlled by one,one way switch with using 1.5 Sqmm (nominal sectional area) multi stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including concealed PVC conduit of adequate size fixed in to the surface and including sunken type metal flush box suitable for holding modular frame and switchs of required size and modules including single core multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. iii) The quoted rates shall be deemed to be inclusive for provision of sunken box suitable for modular fitting including base plate ,frame os suitable module specfied by Enginner-in-charge.

All as per item 93 but One light/buzzer/exhaust fan/fan point controlled by one way switch including supply and fixing of fan hook .( One circuit with maximum 8 points )

All as per item No. 93 here-in-before but with 2.5sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for one 3 pin socket out let 5 amp point controlled by one way switch. ( One circuit with maximum 4 points )

All as per item No. 93 here-in-before but with 2.5sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

S&F Modular switch 1 way 6A,1 module, one way, 230 volts AC circuit complete all as specified and directed.

S&F socket outlet five pin, 5 Amps, modular type, 230 volts AC circuit complete all as specified and directed.

S&F socket outlet combination, multipurpose, three pin, 15 Amps & three pin 5 Amps controlled by one switch , modular type, 230 volts AC circuit complete all as specified and directed.

S&F Modular switch 1 way 16A,1 module, one way, 230 volts AC circuit complete all as specified and directed.

S&F modular fan regulator electronic, step type, suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified and directed.

S & F in replacement elegantly industrial general purpose box type luminaire, 1x20 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with electronic ballast, spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable for LED/CFL lamp fitting complete all as specified and directed by Engr-in-charge

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for MCB DB SPN 8 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by accepting officer

Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed :-

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

Supply and fix storage type water heater electric type, steel body with copper inner tank and heating element upto 2 KW capacity 25 Ltrs BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, suitable number fastners, Plugtop connection etc complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fix storage type water heater electric type, steel body with copper inner tank and heating element upto 2 KW capacity 25 Ltrs BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, suitable number fastners, Plugtop connection etc complete all as specified and directed.

S&F Modular switch socket outlet combination, multipurpose, three pin, 15 Amps & three pin 5 Amps controlled by one 16A switch including metal flush box conclead , top modular plate 230 volts AC circuit complete all as specified and directed.

M&L for wiring with 2 runs of FRLS PVC insulated unsheathed multi stranded single core copper conducter 2.5 Sqmm of any length from point to DB including PVC conduit drawn through PVC Conduit concealing including accessaries with 1.5 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc and connecting up complete all as specified and directed.

M&L CP connection 450 mm long nylon braided and double flat with nut and washers both side complete all as specified and directed.

Supply and fix Prestressed concrete pole 9.0 metres long, 102x172mm at top and 102x279mm at bottom, class 10 complete all as specified and directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fix in repairs Weather Proof PVC Junction Box made out of not less than 2 mm thick of size 250x200x100 mm (approx) complete with hinged door locking arrangement and consisting of 01 No panel mounted connector 4 pole 32 A - 01 No MCB SP 06 Amps 10 KA - 01 No incl 02 Nos Cable Glands suitable for inserting cable not less than 50 sqmm with 02 No 01 mm GI plate (150x50mm) having two holes as per the size of cable glands, fixed with cable gland for earth connectivity confirming to IP 65 complete including fixing on street light pole with MS Clamps, bolts, nuts and washers complete all as specfied and directed.

Supply, laying and testing cable XLPE Insulated ,PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed.

M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover class LV Type 1, flat, size 250mm x 150mm x 40mm complete all as specified and directed

Supply and laying GI tube light grade 40 mm bore complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m in depth and not exceeding 3.0m depth for foundation, laying of cable/pipe etc or for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard/dense soil complete all as specified & directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate in foundation, filling and mass concrete for poles/struts etc including necessary formwork as required complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregates as in copings, kneelers, apex stones, bed plates, kerbs etc., water troughs and the like including weathering, slightly rounded for chamfered angles and throating including necessary form work complete all as specified and as directed.

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

M/s Bombay Novelty Stores