Construction of Rameshwarpur (SVS) Water Supply Scheme including, Supply Installation, testing and commissioning of Rising Main, Distribution System, Construction of OHT all appurtenance work etc. complete within JJM program under Rudrapur Block

Rates for Construction of Rameshwarpur (SVS) Water Supply Scheme including, Supply Installation, testing & commissioning of Rising Main, Distribution System, Construction of OHT all appurtenance work etc. complete within Jal Jeevan Mission program under Rudrapur Block.

Distribution System

Providing, Lowering into trenches with true to alignment, Laying & Jointing of full lenghts of HDPE Pipes of specified grade as per IS:4984-1995 and specifications, with testing of pipe line including supply of jointing materials. PE-63 Grade; PN-6.0 (6.0 kg/cm2) 63 mm dia

75 mm dia

90 mm dia

110 mm dia

140 mm dia

160 mm dia

Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.

80mm dia

100mm dia

150mm dia

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 coarse sand ) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3(1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : - With F.P.S. bricks.

Dismantling manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres as per direction of Engineer in charge- for bituminuous road.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer in charge- for Nominal concrete 1:3:6 or richer mix.

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.

FHTC (Functional Household Tap Connection)

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc 15 mm dia GI Pipe

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of G.M. ferrule including tapping the main, but excluding the cost of earth work and cost of all materials. 19.01 Ferrule Connection (Labour cost only)/Connection Ferrule Connection (Labour cost only)

Cost of Material for ferruling in FHTC per connection

Repairing of OHT

Cleaning and conditioning of tank

Arrest Leakage

Repair for like ladder, stair case, ventilation shaft, plinth, drain around plinth, etc. comp.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

62 mm thick cement concrete flooring.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and1.4 mm aperture on both sides

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand).

12mm cement plaster of mix 1:6 (1 cement: 6 coarse sand).

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint ofrequired shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Construction of Tube Well

Transporation of suitable truck mounted rig machine air compressor, OP unit, camp equipage, connected T&P and necessary accessories, casing pipe,tube well assembely housing pipe etc. including loading, unloding, creation and leveling of rig machine upto site of work etc complete in all respect as per direction of Engineer in charge required for drilling and development of TW

Erection & Levelling of rig machine at site of work

Drilling of 550 mm dia bore by heavy duty direct rotary Rig machine in alluvial, boulders, pebbles, rocky stone, sticky, clay etc from ground level upto entire depth for 300 mm dia linear assembely as per instruction of Engineer-in charge.

Procurement of TW assembly as below 300 mm dia MSERW plain pipe 7.90mm thick Blind & Threded

300 dia MSERW .Slotted pipe 7.90mm thick.

300mm dia Bail Plug

300mm dia Bail Plug

300mm dia M S clamp with nuts & bolts

Supply of pea gravel of size 1.6mm to 4.8mm

Srrounding of pea gravel in between bore and tube well assembly upto entire depth of tube well ordered by the department

Prepairing & Lowering of tube well assembly starting from G.L. to the required depth including cutting, welding as reqired at site complete with all T& P required Fixing of 300mm dia bail plug with nut & U - bolt

Lowering of 300mm dia MSERW housing pipe (Plain & Slotted pipe) as required

Fixing of 300mm dia, 8mm thick tube well cap

Fixing of 300mm dia, M.S.D.I housing clamp.

Dismantling of rig machine & clerance of site after satisfactory completion of work

Development of tubewell by 350 PSI/1400 CFM air compressor unit to the satisfaction of Engineering in charge to give sand free discharge and proper packing of pea Gravels at least for 70 Hrs.

Development of tubewell by the suitable submersible OP units complete with Lowering and lifting of pumping plant having 2000 LPM discharge approximate including running of OP unit and weld testing of tube well by v Notch atlest for 60 Hrs to the satisfactory completion of work.

Supply of Submersible pump & motor set of 1200LPM, discharge at 50Mt. Head

Supply of Submersible pump & motor set of 1200LPM, discharge at 50Mt. Head (Spare)

Supply, installation, Testing and Commissioning (SITC) on turnkey basis for fully automatic pump automation control panels of different capacities having intelligent unit having "FIELD PROGRAMMABLE LOGIC CONTROLLERS based, SCADA operated pump motor start, Run, control, Protect against faults automatically operated control & management system" for supervisory control and data acquisition system at pumping water supply schemes & two years free of cost A.M.C. for warranty period of following duties as per specifications sheet enclosed & suitable for integration in the existing including cartage from works of manufacturer upto site of work:-40HP

Supply & installation of electronic automatic voltage stabilizer with complete feature asper requirement, capacity: 40 KVA Voltage range 330V-460V/ 240V

PVC insulated and PVC sheathed Round sheathed 4core bright annealed bare copper conductor voltage grade 1100 V as per IS 494/2010 four core copper cable 50Sq.mm

Supply & fixing of H.R.C main switch 3pole with neutral link in 400amp. 440voltage A.C.

Supply & fixing of35KVAR heavy duty power capicitor L&T make 440Volt 50H box type.

Supply and fixing of 150mm dia x6.4mm thick flanged column pipe in 3m length with inter-locking arrangement

Suply and Fixingof suitable 16mm thick MS flanged for column pipe both end with fixing trangle support and cutting of groove for cable all for complete.

150mm dia size column pipe clamps

Supply of Submersible copper cable size 1x3x35 sq.mm.

150mm dia. C.I D/F Sluice valves conforming to IS: 14846-2000 (kirloskar or equivalent)

150mm dia. C.I. D/F Non Return Valves conforming to IS: 14846-2000 (kirloskar or equivalent)

Supply and fixing of Nut-bolts different sizes including all labour and T&P complete in all respect .

Supply and fixing Chain pulley block of 03 Tonne capacity 6 Mt. lift

Supply and fixing of Electric type of dosing system complete with solenoid ciol actuated pulsar circuit, diaphragm & electronically pulp capable of delivery max, 4LPH at 5.5kg./cm2 pressure operated 220 Volt single phase A.C. Supply along with chemical injection device and 100 Ltrs capacity of media tank complete with accessories

Supply of Liquid Chlorine required for six month maintenance

Supply and fixing Pressure gauge with fitting.

Providing & Installation of earthing work including all labour & material etc complete.

Installation of pump set and comissioning testing work etc complete.

One month trial running work etc complete.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.15/16 A switch

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.6 pin 15/16 A socket outlet

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

Supplying and fixing of LED T-5, 18 watts tubelight fitting, connection etc complete.

Supplying and fixing exhaust fan with jali, 450mm sweep including making hole for exhaust fan and making good the damage, connection etc complete.

Supplying and fixing LED street light fitting 60 watts etc complete.

Supplying and fixing G.I. 32mm size L type bracket clamps with fixing of street light etc complete.

Supplying and fixing of 14 watts LED bulb etc complete.

Supplying and fixing of wall fan 400mm sweep model platina etc complete.

M/S SUNIL KUMAR GAUR CONTRACTOR