Electrical Hot Works On-Board the Vessel 11200 (Rate Contract)

Amount

Group-I -Preparation, Openings and welding of Electrical Cable entry coaming of following type(H x W x L x t)

100x 200x 200X8 and below

above 100x 200x 200 x8 and up to 200x 200 x200x 8

above 200 x200x 200 x8 and up to 200x 400x 200x 8

above 200x 400 x200x 8 and up to 200x 600x 200x 8

above 250 x200x 200 x8 and up to 250x 400x 200x 8

above 200x 400 x200x 8 and up to 200x 600x 200x 8

200x 600 x200x 8 and above

Pipe coamings upto 100 mm ID

Pipe coamings above 100 mm ID

Group-II-Openings and welding of Electrical MCT coaming of following type (WXH)

SRC 2x1 (140 x 118)

SRC 2x1_EX (140 x 118_Ex)

SRC 6x1 (140 x 238)

SRC 6x2 (270 x 238)

SRC 6x2_EX (270 x 238_Ex)

SRC 6x3 (400 x 238)

SRC 6x3_EX (400 x 238_Ex)

SRC 8x2 (270 x 298)

SRC 8x3 (400 x 298)

SRC 8x4 (532 x 298)

Single Cable MCT Upto 34mm

Single Cable MCT 34mm to 60mm

Group-III-Erection of Gl Cable trays/ Flat bar/ single hangers with supports of following sizes (Width) including fasteners

MS Single cable hanger B20 - 230W x 50L x 40Hx5t mm

MS Single cable hanger B30 - 330W x 50L x 40Hx5t mm

MS Single cable hanger B45 - 480W x 50L x 40Hx5t mm

MS Single cable hanger B65 - 680W x 50L x 40Hx5t mm

MS Single cable hanger B75 - 780W x 50L x 40Hx5t mm

MS Ladder type cable tray L20B – 200W x 950L x 40Hx5t mm

MS Ladder type cable tray L20C –200W x 1250L x 40Hx5t mm

MS Ladder type cable tray L20D –200W x 1550L x 40Hx5t mm

MS Ladder type cable tray L30B –300W x 950L x 40Hx5t mm

MS Ladder type cable tray L30C –300W x 1250L x 40Hx5t mm

MS Ladder type cable tray L30D –300W x 1550L x 40Hx5t mm

MS Ladder type cable tray L45B –450W x 950L x 40Hx5t mm

MS Ladder type cable tray L45C –450W x 1250L x 40Hx5t mm

MS Ladder type cable tray L45D –450W x 1550L x 40Hx5t mm

MS Ladder type cable tray L65B –650W x 950L x 40Hx5t mm

MS Ladder type cable tray L65C –650W x 1250L x 40Hx5t mm

MS Ladder type cable tray L65D – 650W x 1550L x 40Hx5t mm

MS Ladder type cable tray L75B –750W x 950L x 40Hx5t mm

MS Ladder type cable tray L75C –750W x 1250L x 40Hx5t mm

MS Ladder type cable tray L75D –750W x 1550L x 40Hx5t mm

MS Perforated cable tray 50Wx30Hx2500Lx1.6t

MS Perforated cable tray 75WX30Hx2500Lx1.6t

MS Perforated cable tray 100Wx30Hx2500Lx1.6t

MS Perforated cable tray 150Wx30Hx2500Lx1.6t

Group-IV-Fabrication, fitment, welding of foundation, installation of equipment, proper protection of equipment, fitment of name or instruction tallies and earth bolts for control Panel/ Eqpt. with weights of following categories

Below 10Kg

Above 10Kg and up-to 50kg

Above 50Kg and up-to 100kg

Above 100Kg and up-to 200Kg

Above 200Kg and up-to 500kg

Above 500kg

Group-V-Rigid pipe Conduit run

Rigid Up to 50 mm ID

Rigid more than 50 mm to 100 mm ID

Rigid more than 100 mm to 200 mm ID

Group-VI-Instalaltion of ICCP system

Instalaltion of anodes / ref electrodes of ICCP system on ships hull as per OEM specified procedures

Application of dielectric shield material using adhesive compound post surface preparation as per OEM specified procedures

Application of dielectric shield (compound of hardner & epoxy putty) post surface preparation as per OEM specidfied procedures

Note: the quantities mentioned in the above table are indicative, the requirement of quantities can be increased up-to 100% on the actual production progress during course of tender execution period.

avisan engineering enterprises (BID ID -413212)

POSITIVE CONTROLS (BID ID -413300)

SAVYA ENGINEERING SERVICES PVT. LTD. (BID ID -413008)

Solas Marine Services Pvt. Ltd, (BID ID -413014)

SINAXIS ENTERPRISES PRIVATE LIMITED (BID ID -413097)