Loading…
Loading…
Tender ID
Tender Value
₹2.7 L
EMD Value
₹5,420
Closing Date
16 Mar 2026, 4:00 pmClosed
Executive Engineer PHE Division Baramulla
Executive Engineer PHE Division Baramulla
Stabilization of distribution system at Chatoosa Rafiabad under District Capex Budget 2025-26
2026_PHE_305674_1
ENIT 28 of 03/2026
Open Tender
Civil Works
Percentage
15 days
PHE Division Baramulla
Please refer Tender documents.
2 documents required · 2 mandatory
₹300
Executive Engineer PHE Division Baramulla
₹5,420
9 Mar 2026
9 Mar 2026
17 Mar 2026
9 Mar 2026
16 Mar 2026
9 Mar 2026
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. All kinds of soils
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
12mm cement plaster funished with floating coat of neat cement of mix1:3(1 cement :3 fine sand )
Filling of excavated earth (excluding Rock) in trenches, sides of plinth etc.in layers not less than 20cm incl ramming and watering
Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes and Earth work.
20mm dia
25mm dia
40mm dia
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
40 mm nominal bore
25 mm nominal bore
Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.
80 mm dia. Class 1
100 mm dia. Class 1
Welding, including transportation of plant at site etc. complete By electric plant
Manufacturing providing fixing of MS Bends/ Tees including cost of flanges, carraige of welding machine upto site of work, welding charges incl. cost of nuts, bolts, rubber washers etc., complete job.
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete
25 to 40 mm nominal bore
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - SAND
Avg Lead of 25kms
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Cement
Avg Lead of 15kms
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.88 MB
BOQ_992760.xls
BOQ • 0.31 MB
28C.pdf
PDF • 0.52 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .