Construction of Community Hall at 60th Division, Vambay Colony,Vijayawada Municipal Corporation Rc.E11-102029/2026 (MP LADS)

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seigniorage exclduing dewatering charges etc, as per SS - 20 B (APSS 308)

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.

380mm dia piles

300mm dia piles

Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.

380mm dia piles

300mm dia piles

Supply and placing of the RCC M25 (Design Mix) concrete corresponding to IS 456 using 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, cement 380Kgs including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.

Roof Slab GF 125mm thick

Roof Slab GF 150mm thick

Lintel Beams GF

Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete

Providing stone Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.

Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete.

Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete. For Super structure FF

Plastering for Ceilings in CM (1:3) 12mm thick including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete.

Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete.

Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete. Parapat wall

Plastering for walls in CM (1:4) 20mm thick including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete

Providing impervious coat to exposed RCC roof slab surface with CM (1:3) 20mm thick with 1kg of water proof compound per Bag of cement laid over roof when it is green including cost of all materials, including convyenace charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls

Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS (Internal Walls)

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS (External Walls)

Painting with Synthetic Enamel Paints -Two coats -for New Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Providing and fixing factory made uPVCwhitecoloursliding glazedwindowupto1.50minheightdimen sioncomprising of uPVC multichamberedframe with in-built roller trackand sash extruded profiles dulyreinforced with 1.60±0.2mm thick galvanizedmildsteel section made from rollformingprocess of required length (shape & sizeaccording to uPVCprofile), appropriatedimension of uPVC extruded glazingbeads anduPVC extruded interlocks,EPDMgasket,woolpile,zincallo y(white powder coated) touch locks with hook,zinc alloy body with single nylonrollers(weightbearingcapacityto be 40kg),G.I fasteners 100x8mm size fo rfixing frame to finishedwall and necessarystainless steel screwsetc. Profile offrame & sashshall be mitred cut andfusion welded atall corners, including drilling of holes forfixing hardware's and drainageofwateretc. After fixing frame the gap betweenframeandadjacentfinishedwalls hallbefilled with weather proof silicon sealentover backer rod ofrequired size and ofapproved quality, all complete as perapproveddrawing & direction of Engineer -in - ChargeinclusiveofcostofSingle/doublegl asspanes, wiremesh and silicon sealent .Note: For uPVC frame and sashextruded profiles minus 5%tolerancein dimension i.e. in depth &width of profile shall be acceptable.Variation in profiledimension in higher side shallbe accepted but no extra payment on this account shallbemade.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels)made of (small series) frame 92 x 44mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm).(BMT-P.80B)

Supply and delivery of RCC Jollies with 40mm thick including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including, complete for finished item of work, but including the cost of conveyance of all materials.(600x600 of 8mm to10 mm thick )

Flooring with ceramic tiles, set over base coat of cement mortar (1:8) 7.3 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, complete for finished item of work, but including the cost of conveyance of all materials.

Walling with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.

Supply & Fixing of Powder Coated Mild Steel doors, frames & shutters madeofSkinpassgalvanizedIronsheetcon forming to Base Steel as per IS 513“D” Quality, Galvanized as per IS 277with Hot Zinc Coating of120 grams /Sq.Mtr with powder coatingof thickness 60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet formedto single rebate profile of ize 100 mm X58 mm and filled with in-fill Polyurethanefoam, the Door Shutters are with 0.80mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell withLock Seam joints at stile edges, ittedwithinfillofHoneycombKraftPaperand coated with polyester powders of Pure polyester/epoxy polyester or polyurethane powder for powder coatingof thickness 60 – 65 microns and arecoated with ZincPhosphate Primertoreceive any paint on site or finished withThermo setting Polyurethane paintofAliphatic Grade providing high levels of scratch resistance and durability,the Shutter provided with 6 MM clear float vision glass in Circular,Squareor Rectangular shapes,Stainless SteelBall Bearing Butt Hinges 3mmthick fixed flush to the frame and shutter Profile102x76x3mmthick).MortiseSash Lock with Lever Handles, MortiseDead Bolt, etc for industrial, commercial ,residential,cleanroom applications.(BMT-N.55)

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.(BMT-N.83.A)

Supply and fixing of WPC door make with alround WPC frame and inserting 22mm WPC shutter to planks including fixing for necessary size and cost of first quality hinges, tower bolts and necessary fittings ec., completed as directed by departmental authorities(Quotation)

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. MAT-07635

Supply and Fixing of 25mm dia 1.8mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Supply and run of 2 of 56/0.3mm (4 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose and 12 Module Horizontal/Vertical Cover Frame of recommended brands as per category I covering to switches/sockets control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings with Modular Accessories (apsd-3.1.1)

Supply and transportation of following 35Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I .Makes: As per list of recommended brands as category I.(Elec-4.1.1h)

Supply and Fixing of 18W/20W 1200 MM length LED batten light with extruded Aluminium housing and poly corbonate cover , input voltage AC 220-260 Volts with PF >0.9, surge protection 2 KV, THD <15 % with inbuilt driver and frosted cover CCT : 3000K -5700 K , minimum CRI >70, etc complete of make PHILLIPS ,LUMILEDS/OSRAM/SAMSUNG (sd)

Supply and fixing of 48" (1200mm) Sweep decorative Ceiling Fan, with double ball bearings with all accessories without Regulator including all labour charges for fixing, wiring connections etc., complete as directed by the departmental authorities of Make: Crompton (HS Decora/Aura) / Bajaj Regal Star / Havells Festiva / Orient Ornamental Shine/Halonix(Halo) / Polycab(Elanza) / G.M. (G-Storm).

Supply of 6-32A, SP MCB 10KA C/D Curve ISI Mark. Makes: As per list of recommended brands as category I(ELEC-2.10.1a)

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.(apsd)

Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on decolam sheet covered board including earth connection and all labour charges etc., complete on wall. (apsd)

Supply of 200A, 415V Porcelain Rewireable Fuse Units with extension strip. Makes: As per list of recommended brands.(ELEC-2.7.2a)

Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply of (8 +24) 8 Way TPN DB Horizontal with IP 43, 24 No protection suitable for installation of SP outgoing MCBs and for 1 No 4 pole, MCB/Isolator incomer along with provision for 1 No of 4 Pole RCCB/ELCB etc., complete as per IS 8623; IS 13032; IEC 61439-3. Makes: As per list of recommended brands as category I.(ELEC-2.13.4E)

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.MAT-07638 6kg/cm2

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch. Makes: LT LK / BCH / Crompton/ Siemens. ELEC-5.4.15

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 20 mm NB Size etc., complete as directed by the departmental authorities (BMW-F.19)

Supply and delivery and fixing of PVC pipe 110 mm dia 6 Kg/Cm² including cost and conveyance of all materials, labourcharges for fixing in position etc., complete as directed by the departmental authorities. (MAT-07652)

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) (BMW-I.221,222 & 224)

28.60mm OD Pipe

22.20mm OD Pipe

Suipply,Delivery & Fixing of CP Short body bib cock fancy type deluxeheavy duty 12.7 mm dia Indian make etc., complete as directed by departmental authorities. (BMW-E.22)

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap etc., complete.BMW-D.13

Labour charges only for fixing European Water Closet with 'P' or 'S' trap as per standard practice BMW-D.15

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock (BMW-D.24)

Supply and Transportation of 1.0 HP, 10 stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha as directed by the departmental authorities.MAT-03640

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 1995 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) PE - 100 Grade, 10KG/sqcm MAT-07309

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The116 pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,(P.No.201) 160MM BORE