Life boat davit repair works on MV Swaraj Dweep

Amount

Life Boat Davit Repairs: Repairs to be carried out on Life Boat Davits as per below mentioned scope of work to the satisfaction of SS, HSL and Surveyor and finally satisfactory operating trials to be shown to SS, HSL and Surveyor.

ALL 10 LIFE BOATS TO BE TAKEN OUT FROM THE POSITION AND SAFELY PLACED ON DOCK FLOOR IN A PROPER CRADLES & SUPPORTS(MATERIAL WILL BE GIVEN BY HSL) FOR REPAIR INSPECTION PAINTING.AFTER THE REPAIRS ALL BOATS, TO BE BROUGHT BACK ONBOARD AND TO BE PLACED ON DAVITS . THEN SATISFACTORY LOWERING AND HEAVING UP TRAIL TO BE SHOWN TO THE SHIP STAFF.

IN NO-1 & 2 BOATS ON OUT BOARD THE GRIPES STOPPER CORRODED AND WASTED IN TOTAL. SAME TO BE RENEWED 04 NOS.

IN ALL 10 BOATS LIFE BOAT DAVIT SHEAVES 190 NOS TO BE TAKEN OUT FROM PLACE AND OVERHAULED AND PUT BACK IN PLACE.

IN ALL 10 BOATS BOWSING TACKLE BLOCKS: SHEAVE BLOCK: 152 NOS TO BE TAKEN OUT FROM PLACE AND OVERHAULED AND PUT BACK IN PLACE.

DAVIT SLIDING ARM'S ROLLERS 80 NOS TO BE DISMASTLED, FREED,OILED AND GRAESED. THE GREAING POINTS TO BE CLEARED AND CLEARED OF OLD GREASE AND NEW GREASE TO BE PUT. FINALLY THE ROLLERS TO BE PUT BACK IN PLACE.

TO RENEW COLLAR PLATES OF THE SHEAVES ( AXILE PIN HOLDING PLATES ) AS THEY ARE THINNED DOWN. AS OF NOW ASSUME 20 NOS REQUIRE RENEWAL. - 20Nos.

DEADMAN BREAK LEVER THINNED DOWN IN ALL DAVITS. SAME TO BE RENEW.

IN ALL 10 LIFE BOATS DAVIT HEAD FOUND CORRODED . SAME TO BE CHIPPED AND RENEWED.

IN ALL 10 LIFE BOAT BOWSING TACKLE SECURING EYE WELDED ON DAVIT ARM FOUND THINNED DOWN SAME TO BE RENWED TOTAL 20 NOS 150X150X16MM. - 20Nos

IN LIFE BOAT GRIPES SELF CLOSING LOCK FOUND DAMAGED/ MISSING SAME TO BE FITTED AS PER SAMPLE.TOTAL 4 PCS.

LIFE BOAT NO 4, 5, 8 & 3 DAVIT PLATFORM FOR HARBOUR SAFETY PIN FOUND WASTED SAME TO BE RENWED WITH ITS COLLER PLATE APPROX. SIZE CHEQUIRED PALTE 2500X800MMX6MM. - 8LS

IN LIFE BOAT 3, 7, 9, 10, 8 & 6 DAVIT ROLLER TRACKWAY FOUND UNEVEN AND THINNED DOWN SAME TO BE CROPEED AND RENEWED APPROX. SIZE 3000MMX150MMX16MM IN EACH DAVIT. - 12LS

IN ALL LIFE BOAT GRIPES STOPPER (CYLINDER SHAPE) FOUND THINNED CORRODED AND THINNED SAME TO BE RENWED APPROX. SIZE 3 INCH DIA X300MM TOTAL 20 NOS. - 6Nos

IN ALL LIFE BOAT FALL SHEAVE BRACKET(NEAR DAVIT HEAD ) FOUND CORRODED AND WASTED SAME TO BE CROPPED AND RENEWD APP SIZE 150X200MM TOTAL 20 PCS. - 20Nos

LIFE BOAT'S DAVIT WINCH FOUNDATIONS ARE CORRODED, WASTED AND THINNED DOWN. SAME TO BE RENEWED. FOUNDATION SIZE: 1500X1000X10 MM PLATE WITH SUPPORTING STIFFENERS AND FOUNDATION NUTS AND BOLTS. REMOVAL AND REFITMENT OF WINCH IS INCLUDED IN CONTRACTORS SCOPE. - 3LS

WOODEN CRATINGS' CRADLE TO BE MADE & WELDED BELOW THE LIFE BOATS & LIFE RAFTS WITH 80 MM "L" ANGLE PLATE FOR ALL 10 LIFE BOATS & 02 NOS LIFE RAFTS EMBARKATION LADDER. " L" ANGLE PLATE RQUIRED FOR EACH GRADLE IS 5 MTRS.

LIFE BOAT DAVITS 10 NOS. TO BE LOAD TESTED. (i) TEST LOAD 18.351 TONS-08 NOS. (ii) TEST LOAD 8.541 TONS-01 NO. (iii) TEST LOAD 9.118 TONS-01 NO. WEIGHTS AND CRANE FACILITY WILL BE PROVIDED BY HSL.

FOR SERVICING DAVIT SLIDING ARMS ROLLERS, ENTIRE SLIDING ARMS TO BE TAKENOUT FROM THE DAVIT FOR TAKING IT TO YARD WORKSHOP. SAME TO BE BROUGHT BACK AND FIT IN PLACE AFTER REPAIRS AND SATISFACTORY TRAL TO BE SHOWN TO SURVEYORS.

UNREEVING OF ALL 10 LIFEBOAT DAVIT WIRES MAY HAVE TO BE DONE FOR ATTENDING DAVIT SHEAVE REPAIRS AND SLIDING ARM ROLLER REPAIRS . ONCE REPAIRS COMPLETED ,REEVING OF OF ALL 10 LIFEBOAT DAVIT WIRES TO BE DONE PROFESSIONALLY AFTER APPLYING WRP / GREASE ON WIRES . GREASE/WRP - SHIP SUPPLY. WHILE ATTENDING REPAIRS AS PER ABOVE, WIRE DAMAGE IF ANY DUE TO IMPROPER HANDLING BY VENDOR TEAM DURING UNREEVING/REEVING OF WIRES, THEN DAMAGED WIRE TO BE RENEWED WITH NEW CERTIFIED WIRE BY VENDOR WITHOUT ANY ADDITIONAL COST.

SRISAI OILFIELD EQUIPMENTS AND MARINE SERVICES PVT LTD

SRI SRINIVASA ENGINEERING WORKS

RAO ELECTRICAL ENGINEERIONG WORKS

KALATHIL BROTHERS CONSTRUCTION CO. PVT. LTD.

SHM Shipcare