Renovation of Customs Check Post Gate, Colony Gate, Lal Gate at KASEZ, Gandhidham.

ABSTRACT OF COST

AMOUNT (Rs) AMOUNT (Rs)

S. No. DESCRIPTION

2 CONCRETE WORK 15,31,571.00 0.00

3 REINFORCED CEMENT CONCRETE 2,28,15,456.60 0.00

6 WOOD WORK & PVC WORK 4,46,633.00 0.00

11 DISMANTLING AND DEMOLISHING 35,32,668.70 0.00

13 SANITARY INSTALLATIONS 15,151.35 0.00

14 WATER SUPPLY 2,72,908.00 0.00

16 ALUMINIUM WORK 38,42,516.00 0.00

17 WATER PROOFING 11,01,755.84 0.00

18 HORTICULTURE & LANDSCAPING 37,28,029.90 29,98,000.00

19 Reinf Purchase and misc. 0.00 -12,50,000.00

20 ELECTRICAL WORKS 5,24,007.00 4,86,916.00

22 BOOM BARRIERS 0.00 8,95,736.00

TOTAL FOR DSR/ NS ITEMS 6,98,50,423.00 1,46,32,389.00

GRAND TOTAL FOR CIVIL WORKS, PLUMBING WORKS,

GRAND TOTAL FOR CIVIL WORKS, PLUMBING WORKS,

ELECTRICAL WORKS : DSR/ NS ITEMS

NET AMOUNT 7,15,95,603.00

Digitally signed by SHUBHAM

NBCC (India) Limited

(A GOVERNMENT OF INDIA ENTERPRISE)

Renovation of Customs Check Post Gate, Colony Gate, Lal Gate at KASEZ, Gandhidham.

BILL OF QUANTITIES

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

1 2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual

means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm

on plan) including getting out and disposal of excavated earth lead upto 50 m

and lift upto 1.5 m, as directed by Engineer-in-charge.

2 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual

means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm

on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,

including getting out the excavated soil and disposal of surplus excavated soil

as directed, within a lead of 50 m.

3 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of cum 7425.00 196.00 1455300.00 0.00

foundations etc. in layers not exceeding 20cm in depth, consolidating each

deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

TOTAL SUB HEAD - EARTH WORK 2881777.60 0.00

4 4.1 Providing and laying in position cement concrete of specified grade excluding

the cost of centering and shuttering - All work up to plinth level

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 cum 210.00 6812.00 1430520.00 0.00

graded stone aggregate 40 mm nominal size derived from natural sources)

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

5 4.5 Providing and fixing up to floor five level precast cement concrete string or

lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves,

louvers, steps, stair cases, etc., including hoisting and setting in position with

cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering

4.5.1 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm cum 10.00 10105.10 101051.00 0.00

TOTAL SUB HEAD -CONCRETE WORK 1531571.00 0.00

REINFORCED CONCRETE WORK

6 5.9 Centering and shuttering including strutting, propping etc. and removal of form

5.9.1 foundations, footings, bases of columns, etc. for mass concrete sqmt 455.00 392.15 178428.25 0.00

5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 870.00 927.25 806707.50 0.00

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 1115.00 736.40 821086.00 0.00

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqmt 732.00 961.30 703671.60 0.00

7 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending,

placing in position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 46000.00 107.85 4961100.00 0.00

8 5.22A Reinforcement for RCC work including straightening, cutting, bending, placing

in position and binding all complete. Above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 57000.00 107.85 6147450.00 0.00

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

9 5.33 Providing and laying in position ready mixed or site batched design mix cement

concrete for reinforced cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland

/Portland Slag cement, admixtures in recommended proportions as per IS: 9103

to accelerate / retard setting of concrete, to improve durability and workability

without impairing strength; including pumping of concrete to site of laying,

curing, carriage for all leads; but excluding the cost of centering, shuttering,

finishing and reinforcement as per direction of the engineer-in-charge; for the

following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in

design mix shall be payable separately. In case the cement content in design

mix is more than 110% of the specified minimum cement content, the

contractor shall have discretion to either re-design the mix or bear the cost of

(a) 5.33.1 All works upto plinth level

5.33.1.2 Concrete of M30 grade with minimum cement'content of 350 kg /cum cum 460.00 9655.70 4441622.00 0.00

(b) 5.33.2 b) All works above plinth level upto floor V level

5.33.2.2 Concrete of M30 grade with minimum cement'content of 350 kg /cum cum 475.00 10011.35 4755391.25 0.00

TOTAL SUB HEAD -REINFORCED CONCRETE WORK 22815456.60 0.00

10 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in foundation and plinth in:

6.1.2 Cement Mortar 1:6 (1 cement : 6 coarse sand). cum 150.00 7132.25 1069837.50 0.00

11 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level in all

shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 405.00 9105.95 3687909.75 0.00

TOTAL SUB HEAD -BRICK WORK 4757747.25 0.00

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

12 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded

and prepolished, machine cut for kitchen platforms, vanity counters, window

sills, facias and similar locations of required size, approved shade, colour and

texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse

sand), joints treated with white cement, mixed with matching pigment, epoxy

touch ups, including rubbing, curing, moulding and polishing to edges to give

high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

13 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen Each 1.00 978.70 978.70 0.00

sink in kitchen platform, vanity counter and similar location in marble/ Granite/

stone work, including necessary holes for pillar taps etc. including moulding,

rubbing and polishing of cut edges etc. complete.

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

14 8.32 Designing, fabricating, testing, installing and fixing in position Curtain Wall Sqmt 100.00 5015.05 501505.00 0.00

with Aluminium Composite Panel Cladding, with open grooves for linear as

well as curvilinear portions of the building , for all heights and all levels etc.

(a) Structural analysis & design and preparation of shop drawings for pressure

equalisation or rain screen principle as required, proper drainage of water to

make it watertight including checking of all the structural and functional design.

(b) (c) Providing, fabricating and supplying and fixing panels of aluminium

composite panel cladding in pan shape in metalic colour of approved shades

made out of 4mm thick aluminium composite panel material consisting of 3mm

thick FR grade mineral core sandwiched between two Aluminium sheets (each

0.5mm thick). The aluminium composite panel cladding sheet shall be coil

coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin

coating of approved colour and shade on face # 1 and polymer (Service)coating

on face # 2 as specified using stainless steel screws,nuts,bolts,washers, cleats,

weather silicone sealant, backer rods etc. The fastening brackets of Aluminium

alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated

washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor

bolts of approved make in SS 316, Nylon separators to prevent bi-metallic

contacts all complete required to perform as per specification and drawing The

item includes cost of all material & labour component, the cost of all mock ups

at site, cost of all samples of the individual components for testing in an

approved laboratory, field tests on the assembled working curtain wall with

aluminium composite panel cladding, cleaning and protection of the curtain

wall with aluminium composite panel cladding till the handing over of the

building for occupation. Base frame work for ACP cladding is payable under

the relevant aluminium item.s The Contractor shall provide curtain wall with

aluminium composite panel cladding, having all the performance characteristics

all complete , as per the Architectural drawings, as per item description, as

specified, as per the approved shop drawings and as directed by the Engineer-in-

Charge. However, for the purpose of payment, only the actual area on the

external face of the curtain wall with Aluminum Composite Panel Cladding

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

15 NS Supply installation, testing and commissioning, high-pressure laminated sheet Sqmt 755.00 7980.00 0.00 6024900.00

(HPL)having minimum thickness 6MM with EN Standard installation all

complete with necessary scaffolding work, screw, grooves, CNC cutting as per

design provided by the architect etc. all complete as per the direction of

engineer in charge with minimum 12-year manufacturer warranty for any

deviation in colour. (aluminium/ M.S framing work will be paid separately.)

TOTAL SUB HEAD -CLADDING WORK 944205.50 6024900.00

WOOD AND P. V. C. WORK

16 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202

(Part I) decorative type, core of block board construction with frame of 1st

class hard wood and well matched teak 3 ply veneering with vertical grains or

cross bands and face veneers on both faces of shutters.

9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary sqmt 50.00 3473.85 173692.50 0.00

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

17 9.147E Providing and fixing factory made uPVC white colour sliding glazed window

above 1.50 m in height dimension comprising of uPVC multi-chambered frame

with in-built roller track and sash extruded profiles duly reinforced with 1.60 ±

0.2 mm thick galvanized mild steel section made from roll forming process of

required length (shape & size according to uPVC profile), appropriate

dimension of uPVC extruded glazing beads, uPVC extruded interlocks and

uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc

alloy (white powder coated) handle on one side of extreme panel along with

zinc plated mild steel multi point locking having transmission gear with keeps,

zinc alloy (white powder coated) touch lock with hook (if required for wire

mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon

rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size

for fixing frame to finished wall and necessary stainless steel screws etc. Profile

of frame & sash shall be mitred cut and fusion welded at all corners, including

drilling of holes for fixing hardware's and drainage of water etc. After fixing

frame the gap between frame and adjacent finished wall shall be filled with

weather proof silicon sealent over backer rod of required size and of approved

quality, all complete as per approved drawing & direction of Engineer-in-

Charge. (Single / double glass panes, wire mesh and silicon sealent shall be

paid separately). Variation in profile dimension in higher side shall be accepted

but no extra payment on this account shall be made.

Note: For uPVC frame and sash extruded profiles minus 5% tolerance

in dimension i.e. in depth & width of profile shall be acceptable.

Two track two panels sliding window made of (big series) frame 67 x 50 mm & sqmt 35.00 7798.30 272940.50 0.00

9.147E.1 sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing

bead / double glazing bead of appropriate dimension. (Area of window above

2.50 sqm upto 4.00 sqm.)

TOTAL SUB HEAD -WOOD WORKS 446633.00 0.00

18 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes

etc.) trusses etc., including cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer, including welding and bolted with

special shaped washers etc. complete.

10.16.2 Hot finished seamless type tubes Kg 500.00 206.35 103175.00 0.00

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

19 10.25 Steel work welded in built up sections/ framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar Kg 15000.00 172.60 2589000.00 0.00

TOTAL SUB HEAD -STEEL WORKS 2692175.00 0.00

20 11.22 Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm

thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey

cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with

pigment of matching shade complete.

11.22.1 Marble tiles (polished) Raj Nagar

21 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid Sqm 145.00 2354.70 341431.50 0.00

on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and

jointed with grey cement slurry mixed with pigment to match the shade of the

slabs, including rubbing and polishing complete.

22 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved make, in all colours and shades, laid on

20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement

and matching pigments etc., complete.

23 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified

by manufacturer), with water absorption less than 0.08 % and conforming to

I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,

over 12 mm thick bed of cement mortar 1:4(1 cement: 4coarse sand), jointing

with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white

cement & matching pigments etc. complete. Size of Tile 600x600 mm

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

TOTAL SUB HEAD -FLOORING WORKS 490645.60 0.00

24 12.55 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 sqmt 99.00 1703.95 168691.05 0.00

mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial

emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm

thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and

grouting the joints with mix of white cement & marble powder in ratio of 1:1,

including rubbing and polishing of the surface upto 3 cuts complete, including

providing skirting upto 150 mm height along the parapet walls in the same

TOTAL SUB HEAD -ROOFING 168691.05 0.00

FINISHING WORKS

25 13.3 20 mm cement plaster of mix :

26 13.5 15 mm cement plaster on rough side of single or half brick wall of mix:

27 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 sqmt 2935.00 518.55 1521944.25 0.00

(1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster

1:6 (1 cement : 6 fine sand).

28 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered sqmt 527.00 262.70 138442.90 0.00

surface to prepare the surface even and smooth complete.

29 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone

additives of required shade:

13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including sqmt 2935.00 171.10 502178.50 0.00

priming coat of exterior primer applied @ 2.20 kg/10 sqm)

30 13.80 Providing and applying white cement based putty of average thickness 1 mm, Sqm 133.00 156.05 20754.65 0.00

of approved brand and manufacturer, over the plastered wall surface to prepare

the surface even and smooth complete.

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

31 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having

VOC (Volatile Organic Compound ) content less than 50 grams/ litre of

approved brand and manufacture, including applying additional coats wherever

required to achieve even shade and colour.

32 13.85 Applying priming coats with primer of approved brand and manufacture,

having low VOC (Volatile Organic Compound ) content.

13.85.3 With water thinnable cement primer on wall surface having VOC content less Sqm 133.00 73.95 9835.35 0.00

than 50 grams/litre

TOTAL SUB HEAD -FINISHING WORKS 2652247.50 0.00

DISMANTLING AND DEMOLISHING

33 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking cum 856.00 3551.25 3039870.00 0.00

of steel bars and disposal of unserviceable material within 50 metres lead as per

direction of Engineer - in- charge.

34 15.7 Demolishing brick work manually/ by mechanical means including stacking of

serviceable material and disposal of unserviceable material within 50 metres

lead as per direction of Engineer-in-charge.

35 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter

including chowkhats, architrave, holdfasts etc. complete and stacking within 50

15.12.1 Of area 3 sq. metres and below Each 14.00 367.20 5140.80 0.00

36 15.18 Dismantling steel work in built up section in angles,tees,flats and channels kg 1100.00 5.65 6215.00 0.00

including all gussets plate, bolt,cutting, riverts, welding etc.Including

dismembering and stacking within 50 meter Lead.

37 15.23 Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm sqmt 56.00 73.40 4110.40 0.00

38 15.28 Dismnating rooofing including ridges, hips, valleys and gutters etc, and

stacking the material within 50 metres lead of:

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

39 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for Sqmt 400.00 54.65 21860.00 0.00

plaster including disposal of rubbish to the dumping ground within 50 metres

40 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or cum 250.00 263.95 65987.50 0.00

waste materials by mechanical means, including loading, transporting,

unloading to approved municipal dumping ground or as approved by Engineer-

in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

TOTAL SUB HEAD -DISMANTLING AND DEMOLISHING 3532668.70 0.00

41 16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 cum 740.00 218.90 161986.00 0.00

tonne capacity after excavating earth to an average of 22.5 cm depth, dressing

to camber and consolidating with road roller including making good the

undulations etc. and re-rolling the sub grade and disposal of surplus earthwith

lead upto 50 metres.

42 16.43 Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi

tracks/ runways, using cement content as per design mix, using coarse sand and

graded stone aggregate of 40 mm nominal size in appropriate proportions as

per approved & specified design criteria, providing dowel bars with sleeve/ tie

bars wherever required, laying at site, spreading and compacting mechanically

by using needle and surface vibrators, levelling to required slope/ camber,

finishing with required texture, including steel form work with sturdy M.S.

channel sections, curing, making provision for contraction/ expansion,

construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove

cutting machine, providing and filling joints with approved joint filler and

sealants, complete all as per direction of Engineer-in-charge (Item of joint

fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).

Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less

cement used as per design mix is payable/ recoverable separately.

16.43.2 Cement concrete manufactured in automatic batching plant (RMC plant) i/c cum 1000.00 11098.45 11098450.00 0.00

transportation to site in transit mixer

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

43 16.47 Painting runway/taxi track/apron marking with adequate nos of coats to give

uniform finish with road marking paint of superior make as approved by the

Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and

other foreign material etc. and lining out complete.

16.47.1 New work (Two or more coats) sqmt 535.00 188.20 100687.00 0.00

44 16.50 Providing and fixing Glow studs of size 100x20 mm made of heavy duty body Each 204.00 206.30 42085.20 0.00

shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact

polystyrene) or ABS having electronically welded micro- prismatic lens with

abrasion resistant coating as approved by Engineer in charge. The glow stud

shall support a load of 13635 kg tested in accordance with ASTM D4280. The

slope of retro- reflective surface shall be 35 (+/-5) degress to base .The

reflective panels on both sides with at least 12 cm of reflective area up each

side. The luminance intensity should be as per the specification and shall be

tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973.

The studs shall be fixed to the Road surface using the adhesive conforming to

IS, as per procedure recommended by the manufacturer complete and as per

direction of Engineer-in-charge.

45 16.54 Providing and laying Dense Graded Bituminous Macadam using crushed stone

aggregates of specified grading, premixed with bituminous binder and filler,

transporting the hot mix to work site by tippers, laying with paver finisher

equiped with electronic sensor to the required grade, level and alignment and

rolling with smooth wheeled, vibratory and tandem rollers as per specifications

to achieve the desired compaction and density, complete as per specificatons

and directions of Engineer-in-Charge.

16.54.1 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ Cum 100.00 11129.55 1112955.00 0.00

5% (percentage by weight of total mix) and lime filler @ 2% (percentage by

weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

46 16.56 Providing and laying semi- dense Bituminous concrete using crushed stone

aggregates of specified grading, premixed with bituminous binder and filler,

transporting the hot mix to work site by tippers, laying with paver finisher

equiped with electronic sensor to the required grade, level and alignment and

rolling with smooth wheeled, vibratory and tandem rollers to achieve the

desired compaction and density as per specification, complete and as per

directions of Engineer-in Charge.

16.56.1 25 mm compacted thickness with bitumen of grade VG 30 @ 5% (percentage sqmt 1000.00 277.70 277700.00 0.00

by weight of total mix) and lime filler @ 2% (percentage by weight of

Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

47 16.59 Manufacturing, supplying and fixing retro reflective sign boards made up of 2

mm thick aluminium sheet, face to be fully covered with high intensity

encapsulated type heat activated retro reflective sheeting conforming to type -

IV of ASTM-D 4956-01 in blue and silver white or other colour combination

including subject matter, message (bilingual), symbols and borders etc. as per

IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be

activated by applying heat and pressure conforming to class -2 of ASTM-D-

4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20

cm c/c to back support frame of M.S. angle iron of size 25x25x3 mmalong with

theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size

35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6

mm welded with base plate of size 100x100x5 mm at the bottom end and

including making holes in pipes, angles flats, providing & fixing M.S. message

plate of required size, steel work to be painted with two or more coats of

synthetic enamel paint of required shade and of approved brand & manufacture

over priming coat of zinc chromate yellow primer (vertical MS-Tee support to

be painted in black and white colours).Backside of aluminium sheet to be

painted with two or more coats of epoxy paint over and including appropriate

priming coat including all leads and lifts etc. complete as per drawing ,

specification and direction of Engineer-in-charge.

16.59.1 Mandatory/ Regulatory sign boards of 900 mm diametre with support length of Each 24.00 7183.35 172400.40 0.00

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

48 16.60 Manufacturing, supplying and fixing retro reflective overhead signage boards

made up of 2 mm thick aluminium sheet, face to be fully covered with high

intensity and encapsulated lens type heat activated retro reflective sheeting

conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-

charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue

colour back ground and with high intensity grade, pasted on substrate by

pressure sensitive adhesive backing which shall be activated by applying

pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the

plate of structural frame work by means of suitable sized aluminium alloys,

rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well

as in two vertical rows along with theft resistant measures, including the cost of

painting with two or more coats of epoxy paint in grey colour on the back side

of aluminium sheet including appropriate priming coat. The rate includes the

cost of rounding off the corners, lowering down the structural frame work from

the gantry, fixing and erecting the same in position all complete as per

drawings, specification and direction of the engineer-incharge.(Structural frame

work including M.S. plate to be provided separately. Rectangular area of the

sheet only shall be measured for payment).

16.60.1 Overhead informatory road signage Each 10.00 5879.90 58799.00 0.00

49 16.68 Providing and laying 60mm thick faciory made cement concrete interlocking sqmt 1500.00 972.00 1458000.00 0.00

paver block of M -30 grade made by block making machine with strong

vibratory compaction, of approved size, design & shape, laid in required

colour and pattern over and including 50mm thick compacted bed of coarse

sand, filling the joints with line sand etc. all complete as per the direction of

Engineer-in-charge.

50 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 Cum 200.00 10117.60 2023520.00 0.00

grade cement concrete in position to the required line, level and curvature,

jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making

joints with or without grooves (thickness of joints except at sharp curve shall

not to more than 5mm), including making drainage opening wherever required

complete etc. as per direction of Engineer-in-charge (length of finished kerb

edging shall be measured for payment). (Precast C.C. kerb stone shall be

approved by Engineer-in-charge).

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

51 16.79 Providing, laying, spreading and compacting graded stone aggregate (size range cum 250.00 2914.30 728575.00 0.00

53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including

premixing the material with water at OMC in for all leads & lifts, laying in

uniform layers with mechanical paverfinisher in sub- base / base course on well

prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity

to achievethe desired density, complete as per specifications and directions of

Engineer-in-Charge.

52 16.82 Taking out existing kerb stones of all types from footpath/ central verge, Meter 68.00 39.35 2675.80 0.00

including removal of mortar etc., disposal of unserviceable material to the

dumping ground, for which payment shall be made separately and stacking of

serviceable material within 50 metre lead as per direction of Engineer-in

53 16.83 Taking out existing CC interlocking paver blocks from footpath/ central verge, Sqm 755.00 131.75 99471.25 0.00

including removal of rubbish etc., disposal of unserviceable material to the

dumping ground, for which payment shall be made separately and stacking of

serviceable material within 50 metre lead as per direction of Engineer-in

54 NS Signages : Providing and fixing of the following signages using make of cosign Each 5.00 2197.90 0.00 10989.50

or equivalent approved make by architect.All the detailed work out as per the

detailed drawing and instruction of Employer's representative/

Employer.,specifications and drawings as indicated there in to all heights and

elevation including necessary scaffoldings / supports /permanant fixing with

cement mortor if fixed to ground etc complete in all respects.The Signage cost

should be inclusive of panels,hanging system,bridges,primary & secondary

fixings, vinyl, painting, powder coating self glowing mateial as directed etc.All

shop drawings and coordination with other services is in scopeof contractor.(

At all floor) Size (+450mm x 100mm) - FACE /WALL MOUNTED NAME

PLATES/SIGNAGES/INFORMATION SIGNAGES

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

55 NS GRC JALI WORK : Providing & fixing architectural moldings profiles and sqmt 85.00 7516.92 0.00 638938.20

other decorative elements made out of GRC (Glass Fibre reinforced Cement) in

required shape, size & thickness all as per manufacturers specifications, such

as all decorative articles should be made by using high power spray machine,

using AR Glass fiber with minimum ZrO2 16% including necessary

scaffoldings for all heights, as per approved drawings and reference images.

GRC elements thickness shall be 12-15 mm. fixing edges will be 4O TO 50

MM GRC Elements shall be fixed on RCC Structure/Brick Work/ Primary

Steel Structure (MS with protective coat of Red oxide/Zinc Primer Shall be

Used). Hilti make GI Screw Fastners or equvalent, GI Thread Rods and MS

cleats shall be used for fixing of GRC elements on RCC/MS Primary fabricated

structure. Joints shall be filled with PU sealants/ base material of GRC as and

where required. The quote rate shall be inclusive of all design, & shop

drawing and sample mock of all elements approval from Architect &

consultant. The quote rate shall include all Taxes, duties, statutory obligations

and safety code compliance as per client.Rate shall be inclusive of all required

fabrication work for fixing only primary strcure shall be provided as base

structre only as per requirement. Mode and method of measurement shall be in

accordance with IS: 1200.a ) GRC JALI : as per specification work (Elevation

area- At any height)

56 NS Providing and Fixing the S.S. 304 Letters with back light of given size as per Each 3.00 49550.32 0.00 148650.96

Architect's drawings and approved sample or make (Approx Height of each

letter 18 to 24 inches) along with all necessary hardwares, scaffolding, Alu/MS

Back support, hanging support and accessories, The rate shall be for complete

item inclusive of all material, labour, wastages, necessary tools & tackles, for

all floors, all heights, all levels and all places within campus. Contractor shall

do all the needful and shall fulfill Architect's design intent. No additional

claims will be entertained for this.

TOTAL SUB HEAD -ROAD WORKS 17337304.65 798578.66

SANITARY INSTALLATIONS

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

57 17.3 Providing and fixing white vitreous china pedestal type water closet (European

type) with seat and lid, 10 litre low level white vitreous china flushing cistern &

C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow

arrangement with specials of standard make and mosquito proof coupling of

approved municipal design complete, including painting of fittings and

brackets, cutting and making good the walls and floors wherever required :

17.3.1 W.C. pan with ISI marked white solid plastic seat and lid Each 1.00 8006.60 8006.60 0.00

58 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings

and brackets, cutting and making good the walls wherever require:

17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. Each 2.00 2648.85 5297.70 0.00

brass pillar taps.

59 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including

P.V.C. waste fittings complete.

17.28.2 Flexible pipe

60 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of Each 1.00 1607.95 1607.95 0.00

approved quality) complete with 6 mm thick hard board ground fixed to

wooden cleats with C.P. brass screws and washers complete.

TOTAL SUB HEAD -SANITARY INSTALLATIONS 15151.35 0.00

61 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply including all CPVC plain & brass

threaded fittings This includes jointing of pipes & fittings with one step CPVC

solvent cement, trenching, refilling & testing of joints complete as per direction

of Engineer in Charge.

18.9.10 150 mm nominal dia Pipes Meter 40.00 6822.70 272908.00 0.00

TOTAL SUB HEAD -WATER SUPPLY 272908.00 0.00

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

62 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with

collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1

cement : 2 fine sand) including testing of joints etc. complete :

63 19.27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in

cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast

R.C.C. horizontal grating with frame complete as per standard design :

19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 6.00 5957.90 35747.40 0.00

64 19.21 Making connection of drain or sewer line with existing manhole including

breaking into and making good the walls, floors with cement concrete 1:2:4 mix

(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse

sand), finished with a floating coat of neat cement and making necessary

channels for the drain etc. complete

19.21.2 For pipes 250 to 300 mm diameter Each 5.00 922.40 4612.00 0.00

TOTAL SUB HEAD -DRAINAGE 114931.90 0.00

65 21.1 Providing and fixing aluminium work for doors, windows, ventilators and

partitions with extruded built up standard tubular sections/ appropriate Z

sections and other sections of approved make conforming to IS: 733 and IS:

1285, fixing with dash fasteners of required dia and size, including necessary

filling up the gaps at junctions, i.e. at top, bottom and sides with required

EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust

free, straight, mitred and jointed mechanically wherever required including

cleat angle, Aluminium snap beading for glazing /paneling, C.P. brass/

stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be

paid for separately) :

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) KG 6840.00 530.90 3631356.00 0.00

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

21.1.2 For shutters of doors, windows & ventilators including providing and fixing

hinges/ pivots and making provision for fixing of fittings wherever required

including the cost of EPDM rubber / neoprene gasket required (Fittings

shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) KG 200.00 634.45 126890.00 0.00

66 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters

and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the

architectural drawings and the directions of engineer-in-charge . (Cost of

aluminium snap beading shall be paid in basic item):

21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) Sqm 50.00 1685.40 84270.00 0.00

TOTAL SUB HEAD -ALUMINIUM WORK 3842516.00 0.00

67 22.6 WATER PROOFING : Providing and laying water proofing treatment on roofs sqmt 1599.30 688.90 1101755.84 0.00

of slabs by applying cement slurry mixed with water proofing cement

compound consisting of applying: (a) after surface preparation, first layer of

slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound

@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first

layer is still green. Overlaps of joints of fibre cloth should not be less than 10

cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289

kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and

coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours

followed by water curing for 48 hours. The entire treatment will be taken upto

30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth

and final layer of brick tiling with cement mortar (which will be paid for

separately. For the purpose of measurement the entire treated surface will be

TOTAL SUB HEAD -WATER PROOFING 1101755.84 0.00

HORTICULTURE & LANDSCAPING

68 2.2 Supplying and stacking of good earth at site including royalty and carriage CUM 3000.00 515.60 1546800.00 0.00

upto 5 km complete (earth measured in stacks will be reduced by 20% for

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

69 2.3 Supplying and stacking sludge at site including royalty and carriage upto 5 CUM 100.00 294.00 29400.00 0.00

km complete (sludge measured in stacks will be reduced by 8% for payment).

70 2.5 Rough dressing the trenched ground including breaking clods. sqmt. 500.00 1.50 750.00 0.00

71 2.6 Uprooting weeds from the trenched area after 10 to 15 days of its flooding sqmt. 501.00 4.90 2454.90 0.00

with water including disposal of uprooted vegetation.

72 2.7 Fine dressing of the ground. sqmt. 500.00 3.70 1850.00 0.00

73 2.8 Spreading of sludge, dump manure and/or good earth in required thickness CUM 100.00 52.35 5235.00 0.00

as per direction of officer-in-charge (cost of sludge, dump manure and/ or

good earth to be paid separately).

74 2.9 Mixing earth and sludge or manure in the required proportion specified or CUM 100.00 36.55 3655.00 0.00

directed by the Officer-in-charge

75 2.16 Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above Each 150.00 4533.10 679965.00 0.00

ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3 mm 2 m long

verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two

halves, fixing together at site with required six numbers of 8 mm dia and 30

mm long bolts, including painting two coats with synthetic enamel paint of

approved brand and manufacture over a coat of primer. One name plate of 1

mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near

the middle height and lettered CPWD / PWD/ any other approved name. The

tree guard shall be suitably fixed to the ground by embedding four legs of tree

guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil

and ramming, complete in all respect as per satisfaction and direction of Officer-

76 2.33 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm Sqmt 6800.00 214.40 1457920.00 0.00

thickness of existing ground prepared with proper level and ramming with tools

wooden (Dhurmos) and than rolling the surface with light roller make

77 NS Site Clening Including PCC breaking, Waste removal, Old unwanted plants Sqmt 8600.00 50.00 0.00 430000.00

removal, Old Soil excavation and removal and dispose within 1 Km from the

Admin building as per the direction of Engineer in

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

78 NS Complete development of new garden area i.e. grassing ,plantation with all Sqmt 6800.00 250.00 0.00 1700000.00

type of plants trees, shrubs, hedge, potted plants, flower beds, creepers etc,

and other garden features including watering hoeing, making of plants basins,

manuring, trimming and cleaning of hedges/ plants beds, spraying of

insecticides, fungicides, weeding, mowing and top dressing of lawn with

spreading good earth and manure, removal of the garden waste as per direction

and satisfaction of the officer-in-charge) to maintain the lawns for 60 days or

more till the grass forms a thick lawn, in good and healthy conditions.(all

materials as grass manure , good earth, plants, plumbing materials for drip

irrigation system shell be paid separately).

79 NS Flowering Shrubs - 1.5 to 2 ft Nos 3000.00 70.00 0.00 210000.00

87 NS Waterproof Light Nos 10.00 3500.00 0.00 35000.00

89 NS Electric work In Waterbody LS 10.00 5200.00 0.00 52000.00

90 NS Decorative Pots Supply Rotomould Including Plants, Soil, Manure Nos 40.00 3500.00 0.00 140000.00

mixing and Plants Supply and Planting etc

TOTAL SUB HEAD -HORTICULTURE 3728029.90 2998000.00

Reinf Purchase and misc.

91 NS Purchase of steel scrap material from KASEZ office/ NBCC Office and any KG -50000.00 25.00 0.00 -1250000.00

other location in KASEZ by as is where is and no complaint basis. The Gate

Pass and weight recipet shall be submitted by the contractor on is own cost to

the Engineer In–Charge.

TOTAL OF Reinf Purchase and misc. 0.00 -1250000.00

ELECTRICAL WORK

A SUB HEAD -WIRING

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

92 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

recessed steel conduit, with modular switch, modular plate, suitable GI box and

earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable etc. as required.

93 1.5 Wiring for light/ power plug with 2 x 4 sq.mm FRLS PVC insulated copper Metre 120.00 433.00 51960.00 0.00

conductor single core cable in surface/ recessed steel conduit alongwith 1

No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for

loop earthing as required.

94 1.6 Wiring for light/ power plug with 4 x 4 sq.mm FRLS PVC insulated copper Metre 120.00 662.00 79440.00 0.00

conductor single core cable in surface/ recessed steel conduit alongwith 2

Nos. 4 sq.mm FRLS PVC insulated copper conductor single core cable for

loop earthing as required.

95 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following

sizes of FRLS PVC insulated copper conductor, single core cable in surface/

recessed steel conduit as required.

96 1.20 Supply and fixing of following sizes of steel conduit alongwith the

accessories in surface/recess including painting in case of surface conduit or

cutting the wall and making good the same incase of recessed conduit as

97 1.26 Supplying and fixing modular blanking plate on the existing modular plate & Each 4.00 40.00 160.00 0.00

switch box excluding modular plate as required.

98 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base

& cover plate for modular switches in recess etc as required.

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

99 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front Each 6.00 477.00 2862.00 0.00

on surface or in recess, including providing and fixing 3 pin 5/6 A modular

socket outlet and 5/6 A modular switch, connections etc. as required.

100 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front Each 6.00 586.00 3516.00 0.00

on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps

modular socket outlet and 15/16 amps modular switch, connection etc. as

101 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ Each 8.00 87.00 696.00 0.00

wooden block including connections etc. as required.

102 1.54 Wiring for group controlled (looped) light point/fan point/exhaust fan

point/ call bell point (without independent switch etc.) with 1.5 sq. mm

FRLS PVC insulated copper conductor single core cable in surface/ recessed

steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated

copper conductor single core cable etc. as required.

103 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front Each 7.00 676.00 4732.00 0.00

on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A

modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as

required. (For light plugs to be used in non residential buildings).

104 1.57 Supplying & fixing suitable size GI box wih modular plate and cover in front Each 2.00 727.00 1454.00 0.00

on surface or in recess including providing and fixing 25 A modular socket

outlet and 25 A modular SP MCB, "C" curve including connections, painting

etc. as required.

B SUB HEAD-MCCB, MCB & DB’S

105 2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/ recess, complete with tinned copper

bus bar, neutral bus bar, earth bar, din bar, interconnections, powder

painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

106 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C”

curve, miniature circuit breaker suitable for inductive load of following poles

in the existing MCB DB complete with connections, testing and commissioning

etc. as required.

107 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB Each 10.00 13.00 130.00 0.00

complete etc. as required.

108 2.12 Supplying and fixing following rating, double pole, 240 V, isolator in the

existing MCB DB complete with connections, testing and commissioning etc.

109 2.14 Supplying and fixing following rating, double pole, (single phase and

neutral), 240 volts, residual current circuit breaker (RCCB), having a

sensitivity current upto 30 milliamperes in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

C SUB HEAD-LIGHT FIXTURES & FANS

110 NS Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 Each 14.00 2688.00 0.00 37632.00

star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of

insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit,

safety rope, copper winding, Power Factor not less than 0.9, Service Value

(CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM

(tolerance as per IS : 3742019), THD less than 10%, remote or electronic

regulator unit for speed control and all remaining accessories including safety

pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation

resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC

Supply, earthing etc. complete as required

111 NS Supply of (250 mm Exhaust Fan (1500 RPM).) sizes of heavy duty exhaust Each 2.00 2203.00 0.00 4406.00

fan for single phase 230 volt, 50HZ AC supply complete with motor, blades,

frame, bracket, louver/ shutter etc as required.

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

112 NS Supply, Installation, Testing & Commissioning of surface indoor downlight Each 85.00 749.00 0.00 63665.00

connecting fitting made of die cast aluminium &PMMA diffuser having Dia

200mm & H-48mm. Fixture have minimum efficacy -100lumens/watt and

system lumen output of 1800lumens and system wattage of 18W . Luminaire

have Life of 50000hrs@L70B50 Lumen maintenance, CCT

3000K/4000K/6000K, , IP rating - IP20, CRI >80 SDCM < 5, PF >0.95,

THD<10% and an operating Voltage Range of 100-300 Internal Surge

Protection 3.5KV.The fixture comply with the EMC/EMI. Similar to Legero

Lighting Cat no- LRS-P 3118 or equivalent.

113 NS Supply, Installation, Testing & Commissioning of 2'x2'. Fixture have minimum Each 12.00 2644.00 0.00 31728.00

efficacy at System level (Not Chip Level) -100lumens/watt and system lumen

output of 3000 lumens and system wattage of 30W . Luminaire have Life of

50000hrs@L70B50 Lumen maintenance, CCT 3000K/4000K/6000K, IP

rating - IP20, CRI >80 SDCM < 5, PF >0.95, THD<10% and an operating

Voltage Range of 100-300 Internal Surge Protection 4KV.The fixture comply

with the EMC/EMI . Similar to Legero Lighting Cat no-LSO 5030 or

114 NS Supply of (250 mm Exhaust Fan (1500 RPM).) sizes of heavy duty exhaust Each 2.00 2203.00 0.00 4406.00

fan for single phase 230 volt, 50HZ AC supply complete with motor, blades,

frame, bracket, louver/ shutter etc as required.

115 NS Supply, Installation Testing & Commissioning of Flexible LED Strip Light RM 50.00 257.00 0.00 12850.00

(IP-65) with double tape on backside suitable for Mounting in cove with all

accessories including connections etc as required. Wattage 14.4 Watt / Meter.

116 NS Supply and Installation Ventilation FAN 6" (Anchor amart AIR) each 1.00 1121.00 0.00 1121.00

117 NS Supply and Installationa LUMINIUM PROFILE PRO 001 (22X06) Meter 50.00 129.80 0.00 6490.00

118 NS Supply and Installationa LED Strip 2835 240v LED 4K Meter 500.00 224.20 0.00 112100.00

119 NS Supply and Installationled 18watt LEDLUM APL 302 each 50.00 1416.00 0.00 70800.00

120 NS Supply and Installationled 12watt LEDLUM ARL 1002 each 50.00 1003.00 0.00 50150.00

121 NS Supply and Installationled 7 watt LEDLUM ARL1001 each 50.00 708.00 0.00 35400.00

122 NS Supply and Installationled LED MIRROR LIGHT (BRASS) each 10.00 5616.80 0.00 56168.00

TOTAL ELECTRICAL WORKS 524007.00 486916.00

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

123 NS SUPPLY , INSTALLATION , TESTING & COMMISSION 4 MP Outdoor NOS 16.00 0.00 23,000.00 0.00 368000.00

WDR Motorized Varifocal Bullet Network Camera High quality imaging with

4 MP resolution Efficient H.265+ compression technology Clear imaging

against strong back light due to 120 dB true WDR technology Ai Supported

Dark Fighter Water and dust resistant (IP66) and vandal proof (IK10)

Motorized vari-focal lens for easy installation and monitoring Robust structure

design with full metal materials. (hikvison,cp plus,honeywell)

124 NS SUPPLY , INSTALLATION , TESTING & COMMISSION High quality NOS 4.00 0.00 48,000.00 0.00 192000.00

imaging with 4 MP resolution Efficient H.265+ compression technology

Clear imaging even with strong back lighting due to 120 dB WDR Up to 256

GB SD card slot for storage Anpr Camera 2.8 to 12 mm motorized varifocal

lens for easy installation and monitoring Water and dust resistant (IP67)

EXIR 2.0: advanced infrared technology with long IR range(hikvison,cp

plus,honeywell)

125 NS PTZ CAMERA, Captures a large area and great details at the same time NOS 2.00 0.00 1,80,000.00 0.00 360000.00

High quality imaging with 6 MP resolution for bullet channel 24/7 colorful

imaging and excellent low-light performance with DarkFighter technology

Panoramic channel tilt adjustable from 12° to 24° Secures an expansive area

with 25 × optical zoom and 16 × digital zoom Expansive night view with up to

30 m white light distance and 300 m IR distance Supports deep learning

functions Water and dust resistant (IP67) and vandal resistant (IK10)

126 NS SUPPLY , INSTALLATION , TESTING & COMMISSION 400mbps bit rate NOS 1.00 0.00 3,20,000.00 0.00 320000.00

input max(up to 128-ch ip video), 32x2mp decoding capability, 16 sata

interfaces, 2 hdmi output (up to 8k), 1 esata, 1cvbs, alarm i/o:16/9, 3u case

,19" Ai Supported And Anpr camera Supported

127 NS SUPPLY , INSTALLATION , TESTING & COMMISSION 8 TB ™ 3.5-inch NOS 8.00 0.00 22,000.00 0.00 176000.00

S300 Surveillance Hard Drive is designed and tested for 24/7 reliable

surveillance, built for speed, capacity, and longer content retention.

(wd,Toshiba,Seagate)

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

128 NS 4K signal input, auto loop up to 30 screens with HDMI interfaces Switching NOS 1.00 0.00 1,59,000.00 0.00 159000.00

between three picture modes: Monitoring, Meeting, and Movie Factory

calibration for color and brightness uniformity Direct-lit LED backlight with

uniform brightness and no boundary shadows 1920 × 1080 resolution, 178°

viewing angle Ultra-narrow 3.5 mm bezel design Anti-glare, high definition,

high brightness, high color gamut, and vivid images with rich colors Stable and

24-hour continuous working Metal casing for preventing from radiation and

magnetic & electric field interference

129 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF NOS 2.00 0.00 58,480.00 0.00 116960.00

MANAGED GIGA 10/100/1000 24 PORT ENTHERNET POE SWITCH

WITH 4 SFP PORT (hikvision,cisco,netgear)

130 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF 8 PORT NOS 5.00 0.00 16,000.00 0.00 80000.00

GIGA 10/100/1000 POE SWITCH WITH 2 NOS SFP PORT

(hikvision,cisco,netgear)

131 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF 4 PORT POE NOS 2.00 0.00 3,899.00 0.00 7798.00

SWITCH (hikvision,cisco,netgear)

132 NS 4 MP acusensFocuses on human and vehicle targets classification based on NOS 5.00 0.00 55,000.00 0.00 275000.00

deep learning Support face capture. Up to 5 faces captured at the same time

1/2.8" progressive scan CMOS High quality imaging with 4 MP resolution

Excellent low-light performance with powered-by-DarkFighter technology

45× optical zoom and 16× digital zoom provide close up views over expansive

areas Expansive night view with up to 100 m IR distance Support

H.265+/H.265 video compression

133 NS 4 MP Dome AcuSense Supports Hikvision Embedded Open Platform (HEOP) NOS 8.00 0.00 12,500.00 0.00 100000.00

and importing third party applications Supports 1.5 Tops computing power, 60

MB system memory, 400 MB smart RAM, and 2 GB eMMC storage for

sharing resources Excellent low-light performance with powered-by-

DarkFighter technology Efficient H.265+ compression technology Clear

imaging against strong back light due to 120 dB true WDR technology Focus

on human and vehicle target classification based on deep learning Water and

dust resistant (IP67) and vandal-resistant (IK10)

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

134 NS Fisheye Camera Heatmap: based on deep learning algorithms, the camera NOS 4.00 0.00 28,500.00 0.00 114000.00

counts people and presents an intuitive map Multi dewarping modes: the image

can be dewarped to normal image for viewing intuitively Built-in mic and

speaker: the camera supports two-way audio for real-time audio security

monitoring and communication Built-in IR light: an IR range of 15 meters

provides good visibility in low or even zero-light environments High

resolution 6 MP: capturing clear images even when dewarped into 4-image

Each image is clear and detailed Water and dust resistant (IP67) and vandal

resistant (IK10)

135 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF GIGA NOS 10.00 0.00 2,800.00 0.00 28000.00

10/100/1000 SFP MODULE (hikvision,cisco,netgear)

136 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF SM NOS 20.00 0.00 1,820.00 0.00 36400.00

DUAL FIBER PATCH CORD LC -LC

137 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF 12 NOS 5.00 0.00 15,000.00 0.00 75000.00

PORT LOADED LIU WITH SPLICING AND ALL REQUIRED

ACCESSORIES LIKE PIGTAIL, ADAPTER

138 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF 42 U NOS 1.00 0.00 46,000.00 0.00 46000.00

INDOOR SERVER RACK WITH 2 SET OF 16 AMP PDU, FAN AND

139 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF NOS 5.00 0.00 18,000.00 0.00 90000.00

OUTDOOR RACK PDU, FAN AND HARDWARE

140 NS SUPPLY , INSTALLATION , TESTING & COMMISSION of 12 CORE RM 3000.00 0.00 130.00 0.00 390000.00

SINGLE MODE FIBER CABLE

141 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF CAT-6 RM 1800.00 0.00 45.00 0.00 81000.00

142 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF 3 CORE RM 1800.00 0.00 98.00 0.00 176400.00

2.5 SQMM POWER CABLE

143 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF 25 MM RM 300.00 0.00 79.00 0.00 23700.00

144 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF 25 MM RM 1800.00 0.00 65.00 0.00 117000.00

Digitally signed by SHUBHAM

Sr. No. Description of item Unit QTY. RATE (Rs.) AMOUNT (Rs.)

DSR NDSR DSR NDSR

145 NS Desktop system12th Generation Intel® Core™ i7 Processors, 8gb graphic card NOS 6.00 0.00 98000.00 0.00 588000.00

512ssd, hdd 1 tb motherbord 16gb ram ,smps,Cooler Master with 24" led

146 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF OTHER LOT 1.00 0.00 85,000.00 0.00 85000.00

MISC. ITEMS VIZ. RJ45 CONNECTOR , FLEXIBLE CONDUIT ,

CUSTOMISED CLAMP FOR CAMERA MOUNTING , CAMERA STAND

AND ALL ACCESSORIES ETC

147 NS SUPPLY , INSTALLATION , TESTING & COMMISSION OF NOS 4.00 0.00 3,000.00 0.00 12000.00

CAMERA MOUNTIN POLL 3 MTR

148 NS INSTALLATION OF CABLE LAN CHARGES RM 9000.00 0.00 20.00 0.00 180000.00

149 NS P2P WIRELESS CONNECTIVETI CONNECTIVITY NOS 18.00 0.00 9,000.00 0.00 162000.00

150 NS INVERTER COME UPS FOR 6 HOUR BACKUP NOS 2.00 0.00 72,000.00 0.00 144000.00

CCTV SYSTEM SUB HEAD TOTAL 0.00 4678258.00

152 NS Supply, installation, testing & commissioning of 6 Meter wide Boom Barrier Nos 4.00 0.00 1,10,684.00 0.00 442736.00

with Motorized Control and Control Switches Complete

153 NS Supply, installation, testing & commissioning of Underground Cabling for Set 4.00 0.00 7,500.00 0.00 30000.00

the Mannual Swich to the unit

154 NS Turnstile Bidirectional (Entering/Exiting) lane. High-brightness LED indicates NOS 6.00 0.00 65,000.00 0.00 390000.00

the entrance/exit and passing status except "Pg" type.Fire alarm passing: When

triggered, the arms will be dropped automatically for emergency evacuation.

Support IO connection for 3rd party ACS integration. For "Pg" type, the face

terminal need purchase separately

155 NS Supply, installation, testing & commissioning of Underground Cabling for Nos 6.00 0.00 5,500.00 0.00 33000.00

BOOM BARRIERS SYSTEM TOTAL 0.00 895736.00

Digitally signed by SHUBHAM