GENERAL-PWD Rest House Kannur-SITC of Generator-SITC of Generator-General Electrical Work

OD127191/2024-2025:Supply, Conveyance, Installation, Testing & Commissioning of 40 KVA Diesel Generator set as per latest CPCB IV norms with standard accessories as per technical details given below. 1. Engine : a) Make of Engine - Kirloskar/Ashok Leyland/Mahindra b) Type of Engine - Diesel Engine c) No. of Cylinders - As per manufactures standards. d) Method of Cooling - Water cooled with radiator. e) Aspiration Turbo charged after cooled. f) Design - Suitable for generating set operation 2. Standard accessories with Diesel Engine a) Fly wheel to suit flexible coupling b) Close Coupling c) Air cleaner d) Radiator with fan provided with fan guard. e) Fuel Pump f) Mechanical governor g) Fuel filter h) Lubricating oil filter i) Exhaust silencer j) Exhaust Muffler k) Battery Charger/Generator 3. Engine Instrument Panel with the following items a) Starting switch with key or button b) Lubricating oil pressure gauge. c) Water temperature gauge. d) RPM Indicator with hour meter e) Battery charging Ammeter 4. Safety Controls for Engine a) Trip for low lubricating oil pressure b) Trip for high water temperature. 5. Brushless Alternator a) Make - Kirloskar/Leypower leroysomer/Crompton/Stamford b) Type - Self exited and self regulated. c) Capacity - 40 KVA/32 K W @ 0.8PF d) System of Voltage - 3 phase, 4 wire , 415 V, e) Frequency - 50 Hz f) Insulation - Class F/H The Alternator should confirm to IS 4722. Operation and service manual, spares and tools shall be provided. 6. Fuel Tank Suitable size built in type integrated with the acoustic enclosure Fuel connection shall be done as per standards 7. Battery Suitable size built in type integrated battery with leads and terminals of appropriate AH capacity as per Manufacturers requirement. Automatic Battery charger Solid state phase indication lamp for supply ON/OFF with HRC protection. standard control panel with suitable rating 4P MCCB and accessories such as Multi function meter and separate Energy Meter etc. complete

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

OD127194/2024-2025:Supply and providing the following size of C class MS pipe conforming to relevant IS specifications complete with heavy guage specials such as bends, flanges etc welded and fixed at appropriate locations, providing cork sheet in between the flanges at the joints, bolting the flanges together, painting the pipe, flange etc with 2 coats of heat resistant paint suitable for outdoor applications, fixing the pipe firmly with fabricated structure/wall/any other mechanical support etc as required.- 80 mm dia C class MS pipe as extended exhaust pipe.

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

14.11:Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.

OD127195/2024-2025:Providing 15mm thick cement plaster of mix 1;4 (1 cement;4 fine sand) at all levels

OD189193/2024-2025:Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required. 100A, 4 pole On-Load Change Over Switches.

90.16.1.6:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required6.00 mm copper conductor (4 SWG)