Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹21.7 LAccepted-AOC PLOT NO 52 SIDDARTH PARK BEHIND ICE FACTORY RAVALWADI BHUJ KUTCH GUJARAT 370001 | KACHCHH | GUJARAT | 370001 | L-1 | Accepted-AOC Accepted | |
| 2 | L-2₹23.2 L+₹1.1 L (4.90%)Rejected-AOC OPP RAM MANDIR NALIYA KUTCH 370655 | KACHCHH | GUJARAT | 370655 | L-2 | Rejected-AOC Rejected | |
| 3 | L-3₹23.7 L+₹1.6 L (7.02%)Rejected-AOC KALATALAV TA ABDASA DIST KUTCH GUJARAT PIN 370 660 | KACHCHH | GUJARAT | 370660 | L-3 | Rejected-AOC Rejected |
Tender Value
₹19.4 L
EMD Value
₹38,800
Closing Date
15 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF NALIYA No 1
GE Air Force Station Naliya No 01
PROVN OF KITCHEN CABINET IN VARIOUS SMQ AT AF STN NALIYA
2022_MES_552855_1
8858/E8
Open Tender
Civil Works
Item Rate
180 days
Naliya
As per NIT
7 documents required · 7 mandatory
₹500
Yes
GE AF NALIYA No 1
₹38,800
Yes
31 Mar 2023
19 Sept 2022
17 Oct 2022
19 Sept 2022
15 Oct 2022
3 Oct 2022
19 Sept 2022 - 26 Sept 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified & directed.
M & L for 25 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded aggregate) without using extra cement finishing cement concrete surface even and smooth complete all as specified & directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified & directed.
M & L for Precast cement concrete block masnory with solid blocks, 1: 3: 6 using (20mm graged aggregate) set in cm 1: 6 exc.10 cm in width and setting in mortar complete all as specified & directed.
Use and waste the form work to soffits of suspended slab such as roof slab, landings and similar work . (Horizontal or sloping) for fair finished surface n.exc 200 mm thick complete all as specified & directed.
M & L for RCC 1 : 2 : 4 Type B1 ( 20 MM graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed.
S & F for TMT steel bars 6mm to 8mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia but in stirrups complete all as specified & directed.
S&F for Non skid ceramic coloured tiles 7 to 8mm thick, (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc,laid over 15mm thick screed bed in cement mortar 1:6 and set and jointed in neat cement slurry and pointed in coloured cement complete all as specified & directed.
S&F for glazed ceramic Coloured tiles over vertical surface of wall,350x 250x7mm / 450x350x7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick in CM(1:4) complete all as specified & directed.
M&L for 20mm thick Granite (of any type) pre-polished in cooking platforms including mouldings and like fixed with neat cement slury over 15mm thck cement mortar (1:4) including pointing using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
S&F for Unplasticised PVC pipes of pressure rating 10 kgf/cm sqr with all fittings and fixed to walls and ceilings or laid in floors for 15 mm bore of pipe including taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified & directed.
S&F in repairs, bib taps fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed.
Taking down of cement plaster from surfaces of wall of any description including raking out joints, hacking out for key, scrubbing down with water etc including complete all as specified & directed.
M&L for rendering 10mm thick cement plaster on concrete surfaces of walls in CM 1:6 , finished the surface even and smooth wihout using extra cement etc complete all as specified & directed.
M&L for rendering 5 mm thick cement plaster on concrete surfaces of ceiling in CM 1:3 , finish the surface even and smooth without using extra cement etc complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls, and applying two coat of oil bound distemper over a coat of primer complete all as specified & directed.
M&L for preparation of new plastered of ceiling and applying three coat of white wash complete all as specified & directed.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washer and including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F for Continuous (piano) hinges of brass,40mm width, bright finish or electro galvanised complete all as specified & directed.
M&L for prelaminated particle board 19mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work fixed for cuboards/shelfs etc. complete all as specified and directed.
S&F fpr 100mm stainless steel handles complete all as specified and directed.
S&F in repair magnet type PVC door stopper 30 to 40mm dia fixed with screw behind the door complete all as specified & directed.
Taking down shutter of any description and refixing in same opening of size exc 1 Sqm but n.exc 2 Sqm each complete all as specified & directed.
M&L in repairs, 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed.
S&F MS framed work as in doors or gates of angle or other section such as MS pipe in post holes etc. with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, MS Sliding door bolt (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed.
S&F MS works as in hold fast confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
Cutting holes in brick walls/block massonary built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc. one brick but not exc two bricks complete all as specified and directed.
M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for round bar 10mm dia and over cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and directed.
M & L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces not exc 10 cm width or girth complete all as specified and directed.
M/s. Shree Shakti Enterprise
Hari Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .