PROVISION OF CERTAIN MR/MW WORKS UNDER AGE BR-(I) AND AGE (E/M) AT AF STATION BHUJ

Amount

Supply & fix wall mounted cabinet of dimensions 51x38x99 cm consist of two shelves including fittings and fixtures i.e. magnetic snap closures, butt hinges, handle and hasp & staple with provn of fixing on wall with brackets and fasteners of material prelaminated 18 mm thick MDF board of dark shade complete all as specified and as directed by Engineer-in-Charge. Note:- (i) All built-in and/ or other fittings items for wall mounted cabinet, magnetic snap closures, butt hinges, handle and hasp & staple etc alike all as shown on drawing. (ii) Any minor requirement at site actually required at site will be provided at site by the contractor without any extra cost to Govt. The size, shape & spacing of wall mounted cabinet shall be all as per drg. (iii) Bidder shall refer the drawing on Page no 127 of tender document before quoting the rate of this item.

Material & labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge (Fe-410 W Gde-E-250 quality A).

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in hard/dence soil complete all as specified and directed by Engineer-in-Charge

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in hard/dence soil complete all as specified and directed by Engineer-in-Charge.

Material & labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.

Material & labour for plain cement concrete, type D2, (1:4:8), (using 40mm graded stone aggregate) in foundation and filling mass concrete sub base as in floors complete all as specified and as directed by Engineer-in-Charge.

Returning filling in soil and including spreading leveling watering and well ramming in layers n.exc. 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge.

Material & labour for M-30(design mix) (using 20mm graded stone aggregate) reinforment cement concre foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge.

Material & labour for M-30 (design mix) (using 20mm graded stone aggregate) reinforment cement concre for columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-in-Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed by Engineer-in-Charge.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for MS deformed or twisted bars 8 mm to 10mm dia and over, cut to length, bent to shape required, including crancking, bending spiraly for column & hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.

Material & labour for MS deformed or twisted bars 5mm dia and over upto and including 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 15mm thick in CM (1:4) mixed with water proofing compound on RCC/PCC block masonry surfaces finished even & smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. Note:- Supply only WPC will be measured and paid separately)

Supply only water proofing compound (liquid) ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix hold down mild steel bolts machine made with hexagonal or square heads one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm but n exc 85 cm long of 11 to 32 mm dia of neck complete all as specified and directed by Engineer-in-Charge.

Supply & fix compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc Fe-410-W (Gde-E-250) quality-B complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of new or previously untreated surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces complete all as specified and directed by Engineer-in-Charge .

Supply & fix rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 3000 ltrs including including provision of 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed by Engineer-in-Charge. .

Supply & fix CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge of following sizes:

15mm bore

20mm bore

25mm bore

Supply & fix in repairs CPVC pipes ISI marked, IS-15778 globe or gate valves/ball valves with iron wheel head, screwed both ends for CPVC pipe and foxed complete all as specified and directed by Engineer-in-Charge of following sizes:

15mm bore

20mm bore

25mm bore

50mm bore

Material & labour for galvanised steel tubes medium grade (ISI marked) with all fitting (ISI marked) and fixed complete to wall and ceiling or laid in floor/trenches and under road complete all as specified and directed by Engineer-in-Charge of following sizes:

40mm bore

25mm bore

Material & labour for gun metal gate valve/forged valve with iron wheel head, screwed both ends for jointing iron pipes non rising forged brass spindle class-1, IS-778 marked complete all as specified and directed by Engineer-in-Charge of following sizes:

25mm bore

40mm bore

Supply & fix ball valves 25mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe & fixed (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by Engineer-in-Charge..

Supply & fixing MS saddle piece for branch connecting made out of MS flat iron of size 50x6 mm complete with GI socket welded at the centre of pipe complete with MS nuts, bolts, washers (02/04 Nos) and rubber packing for 150/100 mm dia of pipe complete all as specified and directed by Engr-in-Charge.

Material & labour for road cutting for laying of water pipe line inclding excavation, returning filling in spreading leveling, well ramming in layers complete all as specified and directed by Engineer-in-Charge. Note:- The rate quoted shall be in including the cost of making good of cutting road with PCC 1:4:8 and no extra payment will be allowed to contractor in this regard.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in soft/looses soil complete all as specified and directed by Engineer-in-Charge.

Material & labour for construction of valve chamber with MS sheet cover 3 mm thick with angle iron frame of size 50x50x6 mm double door type and with locking arrangements including excavation and earth work in any type of soil PCC (1:4:8) type D2 as in foundation, PCC benching 1:2:4 type B-1, PCC(1:5:8) block masonry 20 cm thick in cement mortar (1:6) 10 mm thick plastering in CM 1:4, PCC bed in (1;3;6), painting one coat of red oxide and two coats of bituminous black paint on all steel surfaces complete all as specified and as directed by Engineer-in-Charge of size L-1050mm x W-1050 mm x D-1500 mm type C (internal dimensions).

Supply & fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sqmm 3 core complete all as specified and directed by Engineer-in-charge.

Supply & fix switch socket combination 3 pin 16Amp flush type ISI marked complete all as specified and as directed by Engineer-in-Charge.

Supply & fix switch socket combination 3 pin 5Amp flush type ISI marked complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement double door sheet metal enclosures factory made DBs IP-54 protection class suitable for fixing one No 16 Amps switch socket combination and one No 6 Amps switch socket combination single pole and neutral 8 ways 240 volts powder coated complete all as specified and directed by Engr-in-Charge

Supply & install hi wall split airconditioner units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR complete all as specified and directed by Engr-in-Charge Note: The following will be deemed included in the quoted rate by the contractor:- (i) The system should work with eco friendly refrigerant gas. (ii) Making hole on any type of wall & finishing with & including white cement. (iii) Copper pipe line with insulation suitable for refrigerant gas. (iv) Outdoor unit stand, drain pipe, comminication and power cable betwen indoor and outdoor unit.

Supply & fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stablized at 230 V with accurancy of + 2.5% and of capacity 4.0 KVA complete all as specified and directed by Engr-in-Charge.

Supply & fix metal clad enclosure single pole and neutral with a two pin and earth plug and socket complete 240 volt with one single pole MCB of 20 Amps complete all as specified and directed by Engr-in-Charge. .

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through and including including ERW steel conduit of size not less than 20 mm dia on surface of wall/ceiling with all accessories and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engineer-in-charge. Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit .

Material & labour for one light point/ fan point controlled by one , one way flame proof switch wire surface type complete with 1.5 sqmm single core multi stranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade drawn through steel ERW conduit of 20 mm dia (external) heavy duty ISI marked including necessay flame proof /weather proof conduit accessories and fitting concealed in wall/ceiling etc including sealing threaded jointsin conduit accessories like tees, bends elbows, reducers bell mouth tube ends and fixing accessories such as couples, rock nuts saddles, pipe hooks etc complete all as specified and directed by Engineer-in-Charge. .

Supply & fixing LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge. .

Supply & fix switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed by Engineer-in-charge. .

Supply & fix flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and directed by Engineer-in-charge.

Material & labour for one light point/ fan point controlled by one , one way flame proof socket wire surface type complete with 2.5 sqmm copper cable for 15 Amps single core multi stranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade drawn through steel ERW conduit of 20 mm dia (external) heavy duty ISI marked including necessay flame proof /weather proof conduit accessories and fitting concealed in wall/ceiling etc including sealing threaded jointsin conduit accessories like tees, bends elbows, reducers bell mouth tube ends and fixing accessories such as couples, rock nuts saddles, pipe hooks etc complete all as specified and directed by Engineer-in-Charge. .

Material & labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including in stove enamelled steel conduit with accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity one light point controlled by one, one way switch single pole piano type complete all as specified and directed by Engineer-in-Charge

Supply & fixing LED light fitting 1x16 watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge.

Khodiyar Construction