Construction of ACR's Building of MPP School at Jakkampudi (V) of Vijayawada Rural (M) in Krishna District (Udice Code 28161600803)

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work. [Ordinary Soil - Manual means - Upto 3m depth]

Plain Cement Concrete (1:4:8) using 40mm nominal size SS5 hard broken granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work

Plain Cement Concrete (1:5:10) M5 grade using 40mm nominal size SS5 hard broken granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.[FOOTINGS]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [PEDASTALS]

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to work site etc., complete for finished item of work. (APSS NO. 309 & 310) Ordinary Soil

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering,shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Plinth Beam.

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering,shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Columns

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.[CHAJJAS - SUNSHADES]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.For Lintels

Vibrated Reinforced Cement Concrete M 20 Nominal Mix ( by Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 Kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Unsupported height up to 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Steel Centering Plates etc., , shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work For Beams (APSS No. 402 & 403)

Vibrated Reinforced Cement Concrete M 20 Nominal Mix ( by Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 Kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Unsupported height up to 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Steel Centering Plates etc., , shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work For RCC slab of 175 mm thick. (APSS No. 402 & 403)

Brick masonry in CM (1:6) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Basement.

Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.

Ornamental Ceiling plastering with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.

Flooring with high polished granite 16 to 18 mm thick slabs other than black set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including seigniorage charges, labour charges for dressing of tilesetc., complete for finished item of work, but excluding the cost of conveyance of all materials

Providing skirting to internal walls to 15 cm height/ risers of steps with polished Kadapa slabs of 15 mm thick length equal to flooring stones set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth including cost of all materials like Kadapa stone, cement, sand and water etc., complete for finished item of work.

Supplying, fitting and placing HYSD bar reinforcement complete as per drawings and technical specifications for bars below 36mm dia. including overlaps and wastage where they are not welded.

Supplying, fitting and placing MS grilled door, windows, gate including fabrication charges and all incidental charges etc, cost and conveyance of all materials and all labour charges etc., complete. (make of materials - TATA, Jindal, Sail, Visakha)

Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia pipe and 2mm thick medium class and vertical posts of 50mm dia and 2mm thick medium class 1 No for each 2 steps fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 25mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit etc., complete for finished item of work for Ground Floor

Painting to New walls with two coats of acrylic emulsion paint exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of superior quality of approved brand and shade over base coat of primer grade -II making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges etc., complete for finished item of work. EXTERNAL WALSS

Painting to New walls with two coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges etc., complete for finished item of work. INTERNAL WALSS

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades Grade - I over Existing base of Red Oxide Primer in all including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors

Supply and fixing of Two shutter Sliding Windows made of Galvanized Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure polyester powder upto 50-60 microns thick with total coated thickness of 0.80 mm for Outer Frame and 0.80 mm thickness for Sliding Shutter Section, the Outer Frame for Two Tracks with Grill provision, outer Frame section of size of 90 mm x 50 mm and two Window Shutters of Powder Coated extruded Aluminium Alloy Section of 60mmX33.6 mm ( Thickness 1.50 mm ) , shutter frame profile of extruded Aluminium Alloy Section shall have minimum weight of 0.918 kg per running Meter and confirm IS 1948 and the window outer Frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 6 mm thick plain polycarbonate sheet of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminium 1 No. per each shutter and cut to length miter joined with corner brackets including installation of window system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work, Window with Two Powder coated sliding Window Shutters of Powder Coated Extruded Aluminium Alloy Section and with Grill, window outer Frame Size 90 mm x 50 mm have a rebate of 15mm x 5 mm to fit grill made of 10mm MS Sq Rods for horizontal bars welded at a regular pitch of 150mm to all-round frame of 12mm x 6 mm MS flat.

Supply & Fixing of Class room Door of size of 1200 mm x 2100 mm (Single shutter) Powder Coated Galvanized Steel doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steel Mild Steel as per IS 513 􀍞D Quality, Galvanized as per IS 277 with powder coating of thickness 60-65 Microns as per IS 13871 and IS 16074, Door frame with 1.2mm thick Skin pass Galvanized Iron sheet formed to single rebate profile of size 100 mm X 58 mm with 20 mm minimum width Architrave extension flushing the front wzxall and Door frame filled with in-fill Polyurethane foam. The door frame shall be provided with hinge jamb, lock jamb, head and steel base ties at the bottom of the door frames. The door frame shall be provided with 6 Holdfasts (fixing lugs) with split end tail, the head of the hold fast (fixing lug) 100 mm x25mmx1.25mm and tail shall be 200mmx40mmx1.25mm or 12 Nos Metal Anchors per frame of size 10 mm dia and of length of 90 mm to 120 mm. The door frame shall be provided with Mortar guard sheet Galvanized plain skin pass iron sheet 1.20 mm to 1.25 mm thick shall be welded to the frame at the head of the frame having tower bolt holes. It shall also be welded to the frame behind the hinges, mortize locks and latches slots, aldrop and sliding bolts and tower bolt holes etc. 􀍞Nadu-Nedu 2021 Logo shall be embossed and contrast painted on the top of the door frame in the right corner, the size of logo shall be such that it is clearly visible. The door frames shall be provided with suitable Lock Strike Plate, Shock Absorbers, Mortar Guards etc., as per IS 4351 (2008)

Gravel Filling in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.[RCC SLABS 125mm thick]

Plastering with 2 cost ,12mm thick , base coat in CM(1:5), 8mm thick and top coat in CM(1:3), 4mm thick with Water proof compound Manufacture by reputed mannufacture as approved by engineering incharge at 1Kg per 1 bag of cement including sponze finishinf and cost and conveyance of all matyerials and all labour charges etc., complete for External walls (2nd Class Bricks and RR Masonary)

Vibrated reinforced Cement Concrete M 20 Nominal Mix using 20mmsize graded metal(SS 5) HBG M/C metal(Course aggretate)from approved quarry,using a minimum quantity of 350Kgs of cement per 1 cum of concrete incuding cost and conveyance of all materials like cement,fine aggregate(Sand),Course aggregate,water etc to site including centering using casewrina ballies and Wooden runners&staging including all bracings,cross members etc shuttering,machine mixing,laying of concrete,vibrating,lift charges etc complete but execluding cost of steel and its fabrication charges for finished item of work For columns First Floor

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.CHAJJAS - SUNSHADES First Floor

Vibrated Reinforced Cement Concrete M 20 Nominal Mix ( by Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 Kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Unsupported height up to 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Steel Centering Plates etc., , shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work For Beams (APSS No. 402 & 403) First Floor

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.RCC SLABS 125mm thick First Floor

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining,curing, rounding off junctions of wall and slab etc., complete for finished item of work.First Floor

Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.First Floor

Ornamental Ceiling plastering with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete. First Floor

Plastering with 2 cost ,12mm thick , base coat in CM(1:5), 8mm thick and top coat in CM(1:3), 4mm thick with Water proof compound Manufacture by reputed mannufacture as approved by engineering incharge at 1Kg per 1 bag of cement including sponze finishinf and cost and conveyance of all matyerials and all labour charges etc., complete for External walls (2nd Class Brick and RR Masonry for First Floor)

Flooring with polished black Kadapa stones of 15 mm thick set over base coat of CM (1:8) over already laid CC bed/ RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat cement to full depth including cost of all materials like cement, sand and water and flooring stones etc., complete including labour charges for dressing of flooring stones etc., complete for finished item of work.First Floor

Providing skirting to internal walls to 15 cm height/ risers of steps with polished Kadapa slabs of 15 mm thick length equal to flooring stones set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth including cost of all materials like Kadapa stone, cement, sand and water etc., complete for finished item of work.First Floor

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining,curing, rounding off junctions of wall and slab etc., complete for finished item of work.Second Floor

Supply & fixing pre-painted galvalium trepizoidal profile roofing sheets with 0.47mm thickness,coating Aluzinc coating AZ 150 GSM. Tensile strength : 550 MPA,paint coating : Regular modified polyster painting. Thickness (top) 18-20 microns,(bottom) 5-7microns including C/C of all materials like sheets, J bolts, bitumen washers etc. with or wothout ridge with sales & all other taxes & all labour charges etc. complete for fixing sheets in position.

Supply and Fixing MS Purlins 50mm dia including Labour Charges for fixing complete including cost and conveyance of all materials to site, sales and other taxes, all labour charges etc., complete for finished item of work