Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.4 LAccepted-AOC | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹13.8 L+₹2.1 L (18.1%)Rejected-Finance | L2 | Rejected-Finance Not being lowest tenderer | |
| 3 | L3₹14.5 L+₹2.9 L (24.5%)Rejected-Finance | L3 | Rejected-Finance Not being lowest tenderer |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE RANIKHET
GE MES RANIKHET
REPAIRS TO CERTAIN BLDGS AND PERIODICAL SERVICES TO MD AND OTM ACCN AT KAUSANI UNDER GE RANIKHET
2022_MES_533441_2
GE/RKT/35 OF 2022-23
Open Tender
Civil Works
Works
180 days
Kausani under GE Ranikhet
As per NIT
6 documents required · 6 mandatory
₹500
GE RANIKHET
₹30,000
22 Sept 2022
24 Jun 2022
29 Jul 2022
24 Jun 2022
27 Jul 2022
11 Jul 2022
Amount
BOQ ( Sch 'A') B/R items Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including raking out joints, hacking for keys, scrubbing down with water etc and removing rubbish to a dostance not exc 50 m complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement including mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.
Supply only water proofing compound complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed.
M&L for preparation of old decorated surfaces by washing, rubbing down and stopping of painted plastered or un-plastered surfaces of walls and applying one coat of oil bound distemper white or tinted complete all as specified and directed.
M&L for preparation of old decorated surfaces by washing, rubbing down and stopping of painted plastered or un-plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.
M&L for preparation of old decorated surfaces by washing, rubbing down and stopping of painted plastered or un-plastered surfaces of walls and applying one coat of weather proof exterior emulsion paint complete all as specified and directed.
M&L for preparation of old decorated surfaces , plastered or un-plastered surfaces of walls and applying one coat of colour wash complete all as specified and directed.
M&L for preparation of old decorated surfaces , plastered or un-plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old decorated surfaces , plastered or un-plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old painted roof surfaces of steel and iron, exc 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel and iron surfaces of any description, exc 10cm in width or girth and applying one coat of synthetic enamel paint complete as in vertical surface/wall cladding all as specified and as directed.
M&L for preparation of old painted steel and iron surfaces of any description, exc 10cm in width or girth and applying one coat of synthetic enamel paint complete as in door/ gates,windows,railings,structural horizontal & vertical members & similar work all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description, exc 10cm in width or girth and applying one coat of synthetic enamel paint over a one coat of pink primer complete all as specified & as directed.
Material & Labour for French polishing two or more coats on wooden surfaces of any description, exc 10cm in width or girth including cleaning and preparing the surface including a coat of wood filler on old work till to obtain the mirror finish look of the surface complete all as specified and directed.
Taking down wooden chowkhat or frame area not exc 1.5 sqm each with shutter (without taking off shutter from frame) complete all as specified and directed.
Taking down wooden chowkhat or frame area exc 1.5 sqm but not exc 4 Sqm each with shutter (without taking off shutter from frame) complete all as specified and directed.
Taking down shutters of any description not exc 1.0 Sqm each and resecuring or easing and adjusting with refixing in same opening with using of necessary arrangements/iron mongries complete all as specified and directed.
Taking down shutters of any description exc 1.0 Sqm but not exc 2 Sqm each and resecuring or easing and adjusting with refixing in same opening with using of necessary arrangements/iron mongries complete all as specified and directed.
S & F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, and making good with existing surface complete as specified and directed.
S & F 35 mm thick Second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive glass or gauze without sash bars, edges of framing plain fitted with cut and mitred beads for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(a) fitted to chowkats, complete as specified and directed.
S & F 35 mm thick (batten thickness ) IInd class hard wood, plain framed, panelled shutter (any numbers of pannel) of with pannel of timber flat on both sides (feather edges) or 12 mm thick veneered particle board medium density wood particle board with commercial face veneers complete as specified and directed.
S&F 30 mm thick Iind class hard wood glazed and skelton window and ventilators shutters open rebated and prepaired to received glass or gauge etc diveded into square with sash bar edges of framing plain chamfered or rounded fitted with cut and mittered beads for sequring glass gauge etc , size of members of shutters as specified in MES SSR -I section 8 clause 8.24 (b) complete all as spcified and directed
S&F factory made single extruded WPC (Wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rick husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
S&F factory made single extruded WPC (Wood polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and including fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge (Note:- stainless steel butt hinges shall be paid separately.
M&L for mild steel work as in framed work such as grills, gratings, guard bars etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290.Gde-E-165, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads as directed complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality in square or reqd shape not exc 0.50 Sqm in each pane including glazing with oil putty or wooden beats oil putty complete all as specified and directed.
S&F figured glass pin headed type in square n. exc 0.50 sqm in each pane, in square or reqd shape of 3mm thick each pane including glazing with oil putty or wooden beats oil putty complete all as specified and directed.
S&F 5.5 mm thick sheet glass, ordinary quality in square or reqd shape not exc 0.50 Sqm in each pane including glazing with oil putty or wooden beats complete all as specified and directed.
S&F 5 mm thick sheet glass, ordinary quality in square or reqd shape not exc 0.50 Sqm in each pane including glazing with oil putty or wooden beats complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm including necessary beadings and fillets and fixed with tinned stacks or galvanised wire staples complete all as specified and directed.
Supply and fixing 75 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with screws complete as specified and directed.
Supply and fixing 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with screws complete as specified and directed.
Supply and fixing 100 mm butt hinges, excruded stainless steel alloy type B-21 with galvanised mild steel ISI markedhinge pin, anodised and fixed with screws complete as specified and directed.
Supply and fixing 125 mm mild steel pressed handles, oval type, stove enamelled black and fixed with screws, complete as specified and directed.
Supply and fixing 150 mm mild steel pressed handles, oval type, stove enamelled black and fixed with screws, complete as specified and directed.
S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised,fixed with reqd screws complete all as specified & directed.
S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.
M&L for mild steel barrel tower bolts stove enameled black, with bright bolt length of bolt 150 mm (ISI marked) fixed complete fixed with screws, complete as specified and directed.
Supply and fixing mild steel sliding door bolt clip type (ISI Marked) stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts, length of bolt 300 mm and fixed with mild steel wood screws all as specified and directed.
M&L for Block boards , 25 mm thick, grade 1 quality, exterior grade, decorative face on both faces ditto fixed with screw to timber frame work in cup board shutters/shelves incl teak wood beading complete all as specified and directed.
Supply and fixing continuous (piano) hinges width 30 mm mild steel , bright finish or eletrogalvanised complete all as specified and directed.
M&L for18/19 mm thick prelaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard with teak beading of all sides fixed in repair complete all as specified and directed.
S&F in repairs butt hinges, medium weight, cold rolled mild steel, 100mm size complete all as specified and as directed.
S&F in repairs aluminium anodised, barrel tower bolt of size 150 mm long of extruded section and fixed complete all as specified and as directed
S&F in repairs aluminium anodised, barrel tower bolt of size 100 mm long of extruded section and fixed complete all as specified and as directed
S&F in repairs aluminium alloy, anodised, sliding door bolt, 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed
S&F in repairs aluminium handle, 125 mm long , cast type, anodised complete all as specified and as directed.
Supply and fixing 140mm overall length of cover, floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed.
M&L for preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.
Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.
S & F powder coated GI Everest ceiling grid system of grid size 600 X 600 mm fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the main Tee 28x24x0.3mm thick, Cross Tee 28x24x0.3mm thick and Wall angle 24x24x0.3mm thick sections complete all as specified and directed.
S & F 4 mm thick Everest designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 595 X 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed
M&L for solid PVC wall lining consisting of 5.00mm thick single site prelam PVC sheet inclusive of insolvent cement and fixing at site on PVC frame all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame all as specified and directed.
S & F in repairs 6mm thick decorative PVC Sheet hollow (design approved by GE) for insulation and acoustic purpose on wall surface, screw to timber frame work for levelling of wall as reqd, including with panelling to vertical surfaces, fixed with rawl plug and screws complete all as specified and directed.
S&F in repairs 25 mm dia drapery rod fancy type of mild steel with duly powder caoted wood finished fixed with end bracket and with fancy type finale, incl 10 Nos of ring of same parttern for 1.0 mtr of length with other connected accessories complete all as specified and directed.
S&F 8mm thick, wooden pieces, machine presured one side laminated and other side balancing green, as in parquet flooring with and including necessary padding as soft wool graded type as required at site, fixed with adhesive as per manufacturer's instructions including taking down old wooden flooring with or without plywood complete all as specified and directed.
All as per item No 63 here in before but except material.
M&L for 9mm thick plywood, graded BWR, type BB fixed with rawl plug and screws to timber framework fixed as in repair of any thickness complete all as specified and directed.
Dismantling mild steel or wrought iron work in roof trusses, gratings etc and similar work complete all as directed.
M&L for mild steel work as in roof trusses, purlins, rafters, wind ties, crane gantries, rails and fastenings and heavy bracket framing (Beam,Tee,Angle,Channel or Flat sections) including distance pieces,cleats etc complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, in frame work complete all as specified and directed .
M&L for timber framed and fixed second class hard wood clean sawn second class hard wood in scantlings vertical & horizontal members complete all as specified and directed.
Disconnecting existing water tank setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc cap exc 250 ltr & n. exc 500 ltrs, complete all as specified and as directed.
Disconnecting existing water tank setting aside ( or lowering if required ) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc cap exc 500 ltr & n. exc 1000 ltrs, complete all as specified and as directed.
Dismantling PVC water tanks and removing from site capacity exc 250 ltrs but n. exc 500 ltrs complete all as specified and as directed.
Dismantling PVC water tanks and removing from site capacity exc 500 ltrs but n. exc 1000 ltrs complete all as specified and as directed.
M&L for rotational moulded polyethylene water storage tank 500 ltrs capacity triple layered cylindrical vertical with closed top hoisted and fixed in position including fittings all as specified and as directed.
M&L for rotational moulded polyethylene water storage tank 1000 ltrs capacity triple layered cylindrical vertical with closed top hoisted and fixed in position including fittings all as specified and as directed.
S&F 20mm bore ball valve, high pressure with epoxy coated aluminium rod and high density plastic vavle screwed for iron pipe and fixed of 20mm dia (min wt 210 grms) complete all as specified and directed.
S&F in repair 20mm bore ball valve, high pressure with epoxy coated aluminium rod and high density plastic vavle screwed for iron pipe and fixed of 20mm dia (min wt 210 grms) complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed.
Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed.
Supply and fix 15 mm bore galvanized steel water tubing, medium grade with & including necessary GI fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all as specified and as directed.
Supply and fix 20 mm bore galvanized steel water tubing, medium grade with & including necessary GI fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all as specified and as directed.
Supply and fixing in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 450 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed.
S&F in repair vitreous china wash down water closet pan (padestal pattern) with seat cover (excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and as directed.
S&F in repairs flushing cistern 10Ltr capacity PVC valveless, syphonic action type, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.
S&F in repairs for Wash basins white, Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed.
S&F in repairs vitreous china wash basin Ovel type white size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed.
S&F in repairs 15 mm dia bib tap cast copper alloy, fancy type chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as directed complete all as specified and as directed.
S&F in repairs fancy type 15 mm dia Pillar taps ,cast copper alloy ,with capstan heads chromium plated screwed down high pressure, with or without letterd HOT or COLD with long screwed shanks and fly nuts ,screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repairs brass CP Stop valve/ Angle valve 15 mm fancy type with long shank and cup fixed complete all as specified and as directed.
S&F in repairs soap dish tray embedded in wall , vitreous china white, approximate size 160x160x90 mm complete all as specified & directed.
S&F PVC connection 15mm size with brass nuts of length 450mm complete all as specified & directed.
S&F in repairs towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified & directed.
S&F in repairs vitreous china urinals, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; with grating and union for discharge pipe, complete all as specified and as directed.
S&F cast iron floor trap 100 mm dia of outlet, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate complete all as specified and as directed.
S&F in repairs PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and as directed.
S&F in repairs PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and as directed.
S&F PVC (SWR) plain bend 110 mm dia, of any redius with rubber ring joints, complete all as specified and as directed.
S&F PVC (SWR) plain bend 75 mm dia, of any redius with rubber ring joints, complete all as specified and as directed.
S&F 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
S & F in repairs 15 mm bore Fancy type Telephonic Shower (Healthfaucet), Cast Copper alloy, with chromium plated, screwed down high pressure with or without lettered Hot or Cold with lenght not less than 1.0mtr long screwed shanks and fly nuts, screwed for iron pipe/stop value and fixed as Cat No 455, complete all as specified and directed.
M&L for 75mm dia PVC nahani trap or floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.
S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
Demolition of brick work or precast PCC block masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excl ashlars facing,dressed stone work and pre-cast concrete articles complete all as specified & directed.
M&L for precast cement concrete 1:3:6 type C1(using 20 mm graded stone agg) as in block masonry with solid blocks exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified & directed.
M&L for Flush pointing to block in course or ashlar masonry or concrete block walling in Cement mortar1:4 complete all as specified and directed
S& F Power coated aluminum (minimum thikness of power coated 50 micron ) work for doors windows, ventilators and partition (fixed portion ) with extruded built up standard tubular section/approriate Z section and other section of approved make confirming to IS 733 and is 1285 , fixing with dash fasteners of required dia and size, inc.necessary filling up the gaps at junction , i.e. at top , bottom and sides with required EPDM rubber/neoprene gasket etc aluminium sections shall be smooth and rust free straight , mitered and jointed mechnicallly where ever required incl. cleat angle . aluminium snap beding for glazing/paneling , C.P brass / stainless steel screws , all complete as per architectural drg and direction complete all as specified and directed.
S &F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of complete all as specified and directed.
Dismantaling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F Galvanised, corrugated 0.63mm thick mild steel sheeting with two corrugations side lap with grade of zinc coating 120 on both sides inclusive, fixed with L-type or J-type or cranked hook bolts, with bitumen washer / screws complete all as specified and directed.
All as per item No. 112 above but except sheeting (any thickness) complete all as specified and directed . ( Note :- Old serviceable sheet obtaind from item No - 112 above shall be reused) complete all as specified and directed.
S&F Plain, galvanised, 0.63mm mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120 on both sides inclusive fixed with L-type or J-type or cranked hook bolts, with bitumen washer / screws in normal/nainital pattern complete all as specified and directed.
All as per item No. 112 above but except sheeting (any thickness) complete all as specified and directed . ( Note :- Old serviceable sheet obtaind from item No - 112 above shall be reused)
Labour for stripping out old tar felt over roofs, parapets, chimney stacks etc as laid horizontally or vertically and removing the debries to a distance not exceeding 250 m complete all as specified & directed.
M&L for cutting out cracks to "V" section in existing roofs or terrace, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified & directed.
Supplying and laying APP based modified water proofing polymeric membrane, reinforcemed with nonwoven polyster non wove fabric matt (weight not less than 150 gms/sqm) of minimum 3 mm thick and minimum weighing not less than 3 kg/sqm,laid over bituminous primer conforming to IS 3384-1965 @.30 KG/SQM to be applied on prepared surface and apply a coat of bitumen 85/25 grade @1.2 kg/sqm over primer, 15mm thick plastered sufaces layer in CM 1:4 with water proofing compound (WPC )@3% by weight on concrete surface roof / parapet, over lap of minimum 75 mm on longitudinal direction and 100 mm on the transverse direction by thermo-fused torch flame application method complete all as specified & directed.
M/S MOHAN SINGH
M/S ABHI ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .