Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 CrAccepted-AOC 636 04 05 OM NAGAR TAKROHI INDIRA NAGAR LUCKNOW UTTAR PRADESH 226016 | LUCKNOW | UTTAR PRADESH | 226016 | ₹2.1 Cr | L1 | Accepted-AOC Due to Lowest Quoted Rates |
| 2 | L2₹2.4 CrRejected-Finance 76 21 GURUDWARA ROAD NAKA HINDOLA LUCKNOW | LUCKNOW | LUCKNOW | UTTAR PRADESH | ₹2.4 Cr | L2 | Rejected-Finance Due to higher quoted rates |
| Sl No | Description | Qty | Unit | Shipra Sales and Services Pvt Ltd L1 | FRIENDS ELECTRICALS L2 |
|---|---|---|---|---|---|
| 1.00CABLE TERMINATION | |||||
| 1.01 | Supply and Providing heavy duty double compression brass gland and lugs end terminations,IP 66 complete,SIBG type, for the cable specified under above item with Bi-metallic lugs using crimping tool, Insulation tape, Identification tags etc., including end termination and Earthing of Gland. 4C x 6 Sq.mm. CU XLPE armored cable | 2 | Nos | 1,054.7 ₹2,109.40 | 1,107.44 ₹2,214.88 |
| 2.00LIGHT FIXTURES | |||||
| 2.01 | Supply, Installation, assembling, connection, testing & commissioning of post top light fixture, 40-45W Power Module LED, 4000K, -MOUNTED AT 3.3 METER HEIGHT POST TOP POLE : it's - Upper frame made in die-cast and sheet aluminium (thickness: 2.5mm), with threaded coupling G3/4" for fixing,Bottom frame with ring made in die-cast aluminium and two arms made in hotgalvanized steel, with flange for fixing equipped of a hole (diam. 28 mm) .Gasket between the upper and bottom frames.Painted with polyester powder coating in Metallaic Grey (As per Architectural requirement). IP Rating - IP 66.Height –690mm, Dia - 550mm, Weight - 11.5Kg, Area Exposed to Wind(S) - 0.105 m2. Power LED's Module (with CREE/NICHIA/OSRAM/SEOUL. SMD type LED’s with ESD=>8kV & Ceramic package are accepted. Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection upto 1.5kv(an additional surge protection device of 10kV also provided in-built the fixture). Optics with refractive lens (Polycarbonate), UV Resistant & Shock Resistance IK08 or higher.LM80 Reported LED Lifetime is L90@ 50,000hours minimum.(same should be supported by LM 80 report from NVLAP / DAKKS accredited lab) & Estimated LED Lifetime is L80 @ 100,000 hours(Ta-25°C) minimum..LM 80 report & TM 21 calculation should be submitted to support the same.The Light fixture shall be in compliance with IEC 60598-2-3 and other safety test (Supporting Test Report from NABL accredited Laboratory should be submitted) .LM79 report should be submitted from NABL accredited Laboratory. Sample should be submitted for approval from concerned engineer-in charge. | 22 | Nos | 42,343.04 ₹9.3 L | 44,460.19 ₹9.8 L |
| 3.00 | Supply, Installation, assembling, connection, testing & commissioning of ARCHITECTURAL POLE (FOR POST TOP LIGHT)
3.3M height Pole Made in combination of hot dip galvanised mild steel pipe sections 114mm dia. & 76mm dia. Arch. cast iron Base design starts with 322mm Dia. ring, radially tapers to 215mm for a height of 70mm, which is followed by a ring of 215mm dia,, then radially tapers to 135mm for a height of 115mm .Total weight of the base is 15 Kgs. & height of the base is 235mm. Decorative Ring-1 (114/76mm dia. - 3kgs.) & Top Ring(weight- 3kgs.) are made of cast iron. Entire pole shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole is hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box (Concealed) to fix 32A connectors and 6A MCB (to terminate incoming and outgoing armoured cables with glands and lulgs), at the bottom -the inbuilt box should have a flush door of suitable size. The decorative pedastal to be mounted on a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 or appropriate BIS Standards must be vetted by Govt. approved structural engineer at the time of bid submission , however Bidder has to get the test reports of randomly chosen prototype of pole from the accredited test labs before the contract start / execution date informed by Engineer in Charge to verify the pole design. Pole & it's parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint- customised colour Metallaic Grey. Adequate size cutout with opeanable hinged door should be provided on pole with necessary gasket to ensure water tight arrangement for pulling cables and installation of mcb, connectors etc, complete in all respect as per requirement and instruction of engineer in charge. Scope also includes necessary foundation, cable termination, earthing, cable entry pipes, 3 core round flexible wire from junction box to light fixture etc. all require to complete job. Inclusive cost of specially Design RCC Foundation with G.I Nut & Bolt etc as required. | 19 | Nos | 72,949.31 ₹13.9 L | 76,596.85 ₹14.6 L |
| 4.00 | 3.3M HEIGHT HERITAGE SMART POLE
3.3M height Pole Made in combination of Multiple Modules made of mild steel pipe sections 219mm dia. & multiple suitable Cast Iron embellishments like base & rings.Smart features/services such as CCTV Dome type camera, PAS-2nos.(only provision), USB charger, SOS emergency button, WIFI device/router should be inbuilt inside the pole .Entire pole shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, MS pipe modules are hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedastal to be mounted on a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 or appropriate BIS Standards must be vetted by Govt. approved structural engineer at the time of bid submission , however Bidder has to get the test reports of randomly chosen prototype of pole from the accredited test labs before the contract start / execution dated informed by Engineer in Charge to verify the pole design. Pole & Cast iron parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint. : Inclusive Cost of Specially Design RCC Foundation With GI Nut & Bolte etc as required.
CCTV - 2Nos. (Each pole)
S.I.T.C. of 4 MP or better high quality imaging Dome camera with range of 2.8 to 4 mm and 10 mm to 12 mm varifocal lens with low light performance via powered 120 DB WDR 1/3" CMOS or better image sensor , minimum illumination - colour 0.30 Lux , mono 0.1 Lux with IP67 and IK 10 rating, IR distance 30 mtrs or above (Internal/ External) . Image Sensor : 1/3" Progressive Scan CMOS or better Resolution :2560 X 1440; 30fps @ 4MP (2560×1440), higher Compression : a. H.265 MP, M-JPEG H.265 , WDR 120dB, Analysis(edge based) - following rule based alarms and tracking: Line crossing, Enter / leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking. Security HTTPS / IP Filter / IEEE 802.1X ,. Certification: CE, UL, FCC,ONVIF.Protocol, ISO 14001, CUL (for temperatrue), IEC-62676-5, TCP/IP, UDP, DHCP, NTP, RTSP, PPPoE, DDNS, SMTP, FTP, UPnP, Unicast, Multicast, ICMP, HTTP,HTTPS, DNS, DDNS, RTP, RTCP, IGMP, 802.1X, QoS, Ipv4, Ipv6, two way full Duplex Audio Comminication ,time stamp, text overlay, flip & mirror, ROI, Saturation, Brightness, Chroma, Contrast, Wide Dynamic,Sharpen, white balance, video rotation, Scheduled profile settings, AGC, ONVIF: Profile S. environmental rating IP66 and IK 10 Rated, Defog feature. Operating Temperature - 30 °C to + 50.
WiFi
Supply installation testing and commisioning of wi-fi access point for outdoor to provide wireless network connectivity shall have network interface of 10/100/1000 Ethernet Ports (2 nos), maximum bandwithh 450 Mbps in 2.4 GHz band and 1000 Mbps or above in 5 GHz band and Wi-Fi Standards shall be 802.11 a/b/g/n/r/k/v/ac including Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), possibility to create VLAN for isolation of guest trafic to admin data trafic.Maximum Power Consumption: 9W, Operating Temperature : -40 to 70° C,Power Supply: 48V, 0.5A PoE Gigabit Adapter, Certifications: CE, FCC, IC, Guest Traffic Isolation, Concurrent Clientsand VLAN can be done. SOS Consisting of SITC ofoutdoor panic/ emergency switch with addressable input module, has input voltage 15 V DC to 33 V DC, also detects Standby,With inbuilt Isolator Line monitoring when operating with EOL resistor, Contact monitoring Voltage monitoring, Individual monitoring of the two inputs Triggering in the event of line interruption, Triggering in the event of a short circuit.
USB charger
Waterproof USB Dual Charge Socket with 5V DC Output.USB Input Voltage Range,12-24V,USB Output Voltage
5V +/- 5%,Output Current-2x 2.1A (4.2A Total) Raiting,IPX6 waterproof,Metals-316 stainless steel,Plastics,ASA,Internal Coating-Anti-corrosion,External Coating-UV resistant. | 11 | Nos | 5,07,370.82 ₹55.8 L | 5,32,739.36 ₹58.6 L |
| 5.00 | Supply, Installation, assembling, connection, testing & commissioning of ARCHITECTURAL WALL BRACKET
Wall Bracket - which is made in combination of mild steel pipe section 42mm dia.(gradually bent) & Multiple cast iron elements, to get 770 mm horizonal arm length & pleasing aesthetics as approved by concern engineer. After Fabrication, Entire Bracket is hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance .Wall Bracket & it's parts are Akzonobel painted in 3 layer coating(coating thickness-200 microns minimum) in which 1st layer with etch primer(Interprime 539), 2nd layer with epoxy primer(Intercure 200HS ) & 3rd final layer with PU paint(Interthane 1026). | 5 | Nos | 23,203.4 ₹1.2 L | 24,363.57 ₹1.2 L |
| 6.00 | Supply, Installation, assembling, connection, testing & commissioning of LED FIXTURE - 10-15W,LED,3000k, IP 68
Light : The housing in light weight, made of high strength die cast aluminium and coated by static powder making it weather resistant.Protection screen in tempered glass with high impact resistance . Premium thermal management by high heat conductivity aluminum alloy and thermal fins. SS Cover. Pure Polyester powder coating. Precise structure and multi-protection silicon rubber seal guarantees the fixture IP68 rated.
Height – 135mm, Dia.-210mm, Weight - 2.5Kgs.
Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate. CRI > 80,P.F>0.9,voltage input AC100-277V,50/60Hz. In-Built Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Estimated LED Lifetime is 70,000 hours minimum. LM80 report from LED Manufacturer . Light fixture Lumen output is 650-750Lumens. LM 79 Report should be submitted from from UL/NABL Authorised Laboratory. Sample Should be submitted for concerned engineer incharge for approval of light fixture. | 1 | Nos | 47,714.41 ₹47,714.41 | 50,100.36 ₹50,100.36 |
| 7.00 | Supply, Installation, assembling, connection, testing & commissioning of LED Light FIXTURE - NGB-3-3,W,LED,Recessed Light,3000k IP 67 Light (Range of LED Wattage : 3-8 W)
The housing in light weight, made of high strength die cast aluminium and coated by static powder making it weather resistant.Protection screen in tempered glass with high impact resistance(IK 08 or higher) . Premium thermal management by high heat conductivity aluminum alloy and thermal fins. SS Cover. Pure Polyester powder coating. Precise structure and multi-protection silicon rubber seal guarantees the fixture IP67 rated. Length – 231mm,Depth – 110mm, Width-90mm, Weight - 1.7Kgs. Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate,P.F>0.9,voltage input AC100-277V,50/60Hz. In-Built Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Lens made of PC offers asymmetric light distribution. Estimated LED Lifetime is 70,000 hours minimum. LM80 report from LED Manufacturer should be submitted. Minimum Light fixture Lumen output is 400Lumens. LM 79 Report should be submitted from UL/NABL Authorised Laboratory. Sample Should be submitted for concerned engineer incharge for approval of light fixture. | 8 | Nos | 68,621.95 ₹5.5 L | 72,053.04 ₹5.8 L |
| 8.00 | Supply, Installation, assembling, connection, testing & commissioning of Neon Flex - 5W Per Mtr in Monochrome Colour - IP68 suitable for 220 volt direct power supply with driver, cable & junction box . LM80 report from LED Manufacturer should be submitted and LM 79 Report should be submitted from UL/NABL Authorised Laboratory.
Approved | 75 | Mtr. | 6,771.17 ₹5.1 L | 7,109.73 ₹5.3 L |
Tender Value
Refer Docs
EMD Value
₹4.3 L
Closing Date
23 Dec 2025, 5:00 pmClosed
Superintending Engineer
Office of The Superintending Engineer 11th E/M Circle, P.W.D., 107-Nehru Colony (Phase-II), Dharmpur, Dehradun
Reconstruction and Restoration of Sh. Kedarnath Town and Surrounding Areas under C.S.R. of Overall Infrastructure in Sh. Kedarnath in between Saraswati Edge and Temple Street in District Rudraprayag. (Sponsored by REC)
2025_pwd_89781_1
2115/7CB(I)-11/2025-26 Dated 05.12.2025
Open Tender
Electrical Works
365 days
Sh. Kedarnath Dham
Please refer tender documents
2 documents required · 2 mandatory
₹5,900
Executive Engineer, Ty. E/M Division,PWD,Gopeshwar
₹4.3 L
Dehradun
28 Mar 2026
11 Dec 2025
24 Dec 2025
11 Dec 2025
23 Dec 2025
11 Dec 2025
11 Dec 2025 - 17 Dec 2025
18 Dec 2025
Amount
CABLE TERMINATION
Supply and Providing heavy duty double compression brass gland and lugs end terminations,IP 66 complete,SIBG type, for the cable specified under above item with Bi-metallic lugs using crimping tool, Insulation tape, Identification tags etc., including end termination and Earthing of Gland. 4C x 6 Sq.mm. CU XLPE armored cable
LIGHT FIXTURES
Supply, Installation, assembling, connection, testing & commissioning of post top light fixture, 40-45W Power Module LED, 4000K, -MOUNTED AT 3.3 METER HEIGHT POST TOP POLE : it's - Upper frame made in die-cast and sheet aluminium (thickness: 2.5mm), with threaded coupling G3/4" for fixing,Bottom frame with ring made in die-cast aluminium and two arms made in hotgalvanized steel, with flange for fixing equipped of a hole (diam. 28 mm) .Gasket between the upper and bottom frames.Painted with polyester powder coating in Metallaic Grey (As per Architectural requirement). IP Rating - IP 66.Height –690mm, Dia - 550mm, Weight - 11.5Kg, Area Exposed to Wind(S) - 0.105 m2. Power LED's Module (with CREE/NICHIA/OSRAM/SEOUL. SMD type LED’s with ESD=>8kV & Ceramic package are accepted. Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection upto 1.5kv(an additional surge protection device of 10kV also provided in-built the fixture). Optics with refractive lens (Polycarbonate), UV Resistant & Shock Resistance IK08 or higher.LM80 Reported LED Lifetime is L90@ 50,000hours minimum.(same should be supported by LM 80 report from NVLAP / DAKKS accredited lab) & Estimated LED Lifetime is L80 @ 100,000 hours(Ta-25°C) minimum..LM 80 report & TM 21 calculation should be submitted to support the same.The Light fixture shall be in compliance with IEC 60598-2-3 and other safety test (Supporting Test Report from NABL accredited Laboratory should be submitted) .LM79 report should be submitted from NABL accredited Laboratory. Sample should be submitted for approval from concerned engineer-in charge.
Supply, Installation, assembling, connection, testing & commissioning of ARCHITECTURAL POLE (FOR POST TOP LIGHT) 3.3M height Pole Made in combination of hot dip galvanised mild steel pipe sections 114mm dia. & 76mm dia. Arch. cast iron Base design starts with 322mm Dia. ring, radially tapers to 215mm for a height of 70mm, which is followed by a ring of 215mm dia,, then radially tapers to 135mm for a height of 115mm .Total weight of the base is 15 Kgs. & height of the base is 235mm. Decorative Ring-1 (114/76mm dia. - 3kgs.) & Top Ring(weight- 3kgs.) are made of cast iron. Entire pole shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole is hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box (Concealed) to fix 32A connectors and 6A MCB (to terminate incoming and outgoing armoured cables with glands and lulgs), at the bottom -the inbuilt box should have a flush door of suitable size. The decorative pedastal to be mounted on a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 or appropriate BIS Standards must be vetted by Govt. approved structural engineer at the time of bid submission , however Bidder has to get the test reports of randomly chosen prototype of pole from the accredited test labs before the contract start / execution date informed by Engineer in Charge to verify the pole design. Pole & it's parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint- customised colour Metallaic Grey. Adequate size cutout with opeanable hinged door should be provided on pole with necessary gasket to ensure water tight arrangement for pulling cables and installation of mcb, connectors etc, complete in all respect as per requirement and instruction of engineer in charge. Scope also includes necessary foundation, cable termination, earthing, cable entry pipes, 3 core round flexible wire from junction box to light fixture etc. all require to complete job. Inclusive cost of specially Design RCC Foundation with G.I Nut & Bolt etc as required.
3.3M HEIGHT HERITAGE SMART POLE 3.3M height Pole Made in combination of Multiple Modules made of mild steel pipe sections 219mm dia. & multiple suitable Cast Iron embellishments like base & rings.Smart features/services such as CCTV Dome type camera, PAS-2nos.(only provision), USB charger, SOS emergency button, WIFI device/router should be inbuilt inside the pole .Entire pole shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, MS pipe modules are hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedastal to be mounted on a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 or appropriate BIS Standards must be vetted by Govt. approved structural engineer at the time of bid submission , however Bidder has to get the test reports of randomly chosen prototype of pole from the accredited test labs before the contract start / execution dated informed by Engineer in Charge to verify the pole design. Pole & Cast iron parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint. : Inclusive Cost of Specially Design RCC Foundation With GI Nut & Bolte etc as required. CCTV - 2Nos. (Each pole) S.I.T.C. of 4 MP or better high quality imaging Dome camera with range of 2.8 to 4 mm and 10 mm to 12 mm varifocal lens with low light performance via powered 120 DB WDR 1/3" CMOS or better image sensor , minimum illumination - colour 0.30 Lux , mono 0.1 Lux with IP67 and IK 10 rating, IR distance 30 mtrs or above (Internal/ External) . Image Sensor : 1/3" Progressive Scan CMOS or better Resolution :2560 X 1440; 30fps @ 4MP (2560×1440), higher Compression : a. H.265 MP, M-JPEG H.265 , WDR 120dB, Analysis(edge based) - following rule based alarms and tracking: Line crossing, Enter / leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking. Security HTTPS / IP Filter / IEEE 802.1X ,. Certification: CE, UL, FCC,ONVIF.Protocol, ISO 14001, CUL (for temperatrue), IEC-62676-5, TCP/IP, UDP, DHCP, NTP, RTSP, PPPoE, DDNS, SMTP, FTP, UPnP, Unicast, Multicast, ICMP, HTTP,HTTPS, DNS, DDNS, RTP, RTCP, IGMP, 802.1X, QoS, Ipv4, Ipv6, two way full Duplex Audio Comminication ,time stamp, text overlay, flip & mirror, ROI, Saturation, Brightness, Chroma, Contrast, Wide Dynamic,Sharpen, white balance, video rotation, Scheduled profile settings, AGC, ONVIF: Profile S. environmental rating IP66 and IK 10 Rated, Defog feature. Operating Temperature - 30 °C to + 50. WiFi Supply installation testing and commisioning of wi-fi access point for outdoor to provide wireless network connectivity shall have network interface of 10/100/1000 Ethernet Ports (2 nos), maximum bandwithh 450 Mbps in 2.4 GHz band and 1000 Mbps or above in 5 GHz band and Wi-Fi Standards shall be 802.11 a/b/g/n/r/k/v/ac including Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), possibility to create VLAN for isolation of guest trafic to admin data trafic.Maximum Power Consumption: 9W, Operating Temperature : -40 to 70° C,Power Supply: 48V, 0.5A PoE Gigabit Adapter, Certifications: CE, FCC, IC, Guest Traffic Isolation, Concurrent Clientsand VLAN can be done. SOS Consisting of SITC ofoutdoor panic/ emergency switch with addressable input module, has input voltage 15 V DC to 33 V DC, also detects Standby,With inbuilt Isolator Line monitoring when operating with EOL resistor, Contact monitoring Voltage monitoring, Individual monitoring of the two inputs Triggering in the event of line interruption, Triggering in the event of a short circuit. USB charger Waterproof USB Dual Charge Socket with 5V DC Output.USB Input Voltage Range,12-24V,USB Output Voltage 5V +/- 5%,Output Current-2x 2.1A (4.2A Total) Raiting,IPX6 waterproof,Metals-316 stainless steel,Plastics,ASA,Internal Coating-Anti-corrosion,External Coating-UV resistant.
Supply, Installation, assembling, connection, testing & commissioning of ARCHITECTURAL WALL BRACKET Wall Bracket - which is made in combination of mild steel pipe section 42mm dia.(gradually bent) & Multiple cast iron elements, to get 770 mm horizonal arm length & pleasing aesthetics as approved by concern engineer. After Fabrication, Entire Bracket is hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance .Wall Bracket & it's parts are Akzonobel painted in 3 layer coating(coating thickness-200 microns minimum) in which 1st layer with etch primer(Interprime 539), 2nd layer with epoxy primer(Intercure 200HS ) & 3rd final layer with PU paint(Interthane 1026).
Supply, Installation, assembling, connection, testing & commissioning of LED FIXTURE - 10-15W,LED,3000k, IP 68 Light : The housing in light weight, made of high strength die cast aluminium and coated by static powder making it weather resistant.Protection screen in tempered glass with high impact resistance . Premium thermal management by high heat conductivity aluminum alloy and thermal fins. SS Cover. Pure Polyester powder coating. Precise structure and multi-protection silicon rubber seal guarantees the fixture IP68 rated. Height – 135mm, Dia.-210mm, Weight - 2.5Kgs. Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate. CRI > 80,P.F>0.9,voltage input AC100-277V,50/60Hz. In-Built Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Estimated LED Lifetime is 70,000 hours minimum. LM80 report from LED Manufacturer . Light fixture Lumen output is 650-750Lumens. LM 79 Report should be submitted from from UL/NABL Authorised Laboratory. Sample Should be submitted for concerned engineer incharge for approval of light fixture.
Supply, Installation, assembling, connection, testing & commissioning of LED Light FIXTURE - NGB-3-3,W,LED,Recessed Light,3000k IP 67 Light (Range of LED Wattage : 3-8 W) The housing in light weight, made of high strength die cast aluminium and coated by static powder making it weather resistant.Protection screen in tempered glass with high impact resistance(IK 08 or higher) . Premium thermal management by high heat conductivity aluminum alloy and thermal fins. SS Cover. Pure Polyester powder coating. Precise structure and multi-protection silicon rubber seal guarantees the fixture IP67 rated. Length – 231mm,Depth – 110mm, Width-90mm, Weight - 1.7Kgs. Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate,P.F>0.9,voltage input AC100-277V,50/60Hz. In-Built Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Lens made of PC offers asymmetric light distribution. Estimated LED Lifetime is 70,000 hours minimum. LM80 report from LED Manufacturer should be submitted. Minimum Light fixture Lumen output is 400Lumens. LM 79 Report should be submitted from UL/NABL Authorised Laboratory. Sample Should be submitted for concerned engineer incharge for approval of light fixture.
Supply, Installation, assembling, connection, testing & commissioning of Neon Flex - 5W Per Mtr in Monochrome Colour - IP68 suitable for 220 volt direct power supply with driver, cable & junction box . LM80 report from LED Manufacturer should be submitted and LM 79 Report should be submitted from UL/NABL Authorised Laboratory. Approved
JUNCTION BOXES
Supply, Transportation, Installation, testing and commissioning of IP 67 weather proof Outdoor type junction boxes with terminal (W:H:T=180:130:72mm) Terminal capacity suitable for Conductor up to- 1.5 to 6.0 sqmm.
Supply, Transportation, Installation, testing and commissioning of IP 67 weather proof Outdoor type junction boxes with terminal (W:H:T=210:155:92mm) Terminal capacity suitable for Conductor up to 6 to 16 sqmm.
Supply, Transportation, Installation, testing and commissioning of IP 67 weather proof Outdoor type junction boxes with terminal (W:H:T=210:155:92mm) Terminal capacity suitable for Conductor up to 10 to 25 sqmm.
DWC Pipe Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required
63 mm dia (OD-63 mm & ID-51 mm nominal)
120 mm dia (OD-120 mm & ID-103 mm nominal)
200 mm dia (OD-200 mm & ID-175 mm nominal)
CCTV AND PUBLIC ADDRESS SYSTEM : Design, Supply, Install, Testing of Publick address/Speaker system complete with all items mentioned but not limited to below: - In general, the complete system design and installations shall confirm to latest IEC Standards and the specifications, drawings submitted here with. Note : - Quantity mentioned here under is just for reference; Bidder shall be responsible to calculate the exact quantity as per design requirements for each item during bidding. The bidder shall allow for all necessary accessories to comply the installation and design to IEC requirements, which brodally includes all necessary hardware and software.
Supply, installation, testing and commissioning of OFC armoured outdoor SINGLE Mode 6 Core OS2, should be ISO / IEC 11801 - 2nd edition type OS 2 and ITU-T REC G652 tube identification single tube / multiple tube fibre protection (Tube): Polybutylene Terephthalate (PBT). Water Blocking: Thixotropic Gel (Tube) and Petroleum Jelly (Interstices). Core Wrapping: Polyethylene Terephthalate. Armouring: Corrugated Steel Tape Armour (ECCS Tape). Strength Member : Two Steel wires on periphery / two FRP rods on periphery / Central Strength Member FRP. Sheath: UV Stabilized Polythene (HPDE). Maximum Tensile Strength - Short Terms: 1500N or better. Mass (Nominal : Minimum 70Kg/km.
Supply, Installation, assembling, connection, testing & commissioning of Speaker Cable 4sqmm armoured 2 core with all necessary accessories to comply the installation.
Supply and fixing of 20TB (03 Nos 6144 GB HDD )storage with raids for recording with all accessories.
Supply, Installation, Testing and comissioning of 24 port Industrial Switch with 20 SFP ports & 8 Copper Ports(RJ 45), with sitch bandwidth 296 Gbps,24 x 10 0/ 10 0 0BASE-X (SFP) unpopulated port s , 4 port s are combo port s,8 x 10/ 10 0/ 10 0 0BASE-T (RJ-45) - 4 port s are combo port ,4 x 10GBASE-X SFP+ (unpopulated port s), 1x Serial (console port RJ-45),1x 10/ 10 0/ 10 0 0BASE-T out -of-band management port,CPU/ Memory,64-bit MIPS Processor, 1GHz clock,1GB ECC DDR3 DRAM,4GB eMMC Flash, Less than 4 microsecond latency (64-byte),Layer 2/ MAC Addresses: 96K (98,30 4),IPv4 Host Addresses: 62K,IPv4 LPM Ent ries: 12K, 16K on X460 -G2-16mp-,32p-10GE4, IPv6 Host Addresses: 24K, IPv6 LPM Ent ries: 6K, 8K ,40 96 VLAN/ VMANs,9216 Byte Max Packet Size (Jumbo Frame),128 load sharing trunks, up to 32 members per trunk,Hot -swappable power supplies and fan tray, UL , FCC, EN certified.OEM Should be in Magic Quadrant Leaders/Challanger in Wired and Wireless Network( Documantion to be Provided in Technical Bid)
Supply, installation, testing and commissioning of 12 port fiber LIU which have sufficient slots to accommodate 6 duplex LC / SC ports, should have fiber management provision inside with splice tray and other accessories, should be rack mountable 1U, should have splice holder for minimum 12 fiber cores should be made of cold rolled steel.
Supply, installation, testing and commissioning of 6 port fiber LIU which have sufficient slots to accommodate 3 duplex LC / SC ports, should have fiber management provision inside with splice tray and other accessories, should be rack mountable 1U, should have splice holder for minimum 6 fiber cores should be made of cold rolled steel.
Supply Installation Testing & Commissioning of 43" LED Monitor, 4K, HDMI Port, Component video Inputs, 1 Didital Audio Out
Supply, Installation, Testing and commissioning of PC Client Intel i7 processor (for workstation) with clock speed- minimum 3.6GHz, RAM 8 GB & Expandable. Window 10 professional 64 bit 1 TB (For Workstations) With Read & Write functions. LAN Interface 10/100/1000 Mbps Ethernet. Mouse Optical, USB port at front Dual and dual monitor support.
Supply, installation, testing and commissioning of OPTICAL FIBER PIGTAILS, 1.5 meter SM OS2. Precision ferrule end face geometry SC type SM. Factory polished, tested and serialized. Buffer Diameter: 900um tight buffer. Minimum bend radius: install: 30 mm. Retention Strength: 100N. Cable: 900um buffered. Sheath: LSZH.
Supply, Installation & Testing of Single-Mode LC-SC Duplex Patch Cord – 3 Meter
Supply, Installation & Testing of 4 Pair Cat 6 Outdoor Aluminium Armoured Field Installation Unshielded Twisted Pair Cable.
Supply ,Installation ,Testing and Commissioning of Cat6 UTP 24-26 AWG Patch Cord - 1mtr with cross separator, Manufactured from stranded wires for flex-life, Minimum length 3m, LSZH (Low Smoke Zero Halogen)
Supply Installation Testing & Commissioning of 12U outdoor Pole mount cabinet Rack with dual pole mounting clamp with IP66 rated with Dual Channel for rack mount support with FAN and MCB power supply. Rack should be air perfurated and watter proof and suitable for outer envirnment. Rack body should be powder coated paint with rust free. Rack should have 2 cable manger with 5 socket PDU.with foundation & Canopy for weather protection as required
Supply Installation Testing & Commissioning of 42U indoor cabinet Rack with IP66 rated with Dual Channel for rack mount support with FAN and MCB power supply. Rack should be air perfurated and watter proof . Rack body should be powder coated paint with rust free. Rack should have 2 cable manger with minimum 10 socket PDU.with foundation & canopy for weather protection as required
Supply of 3C x 2.5 Sqmm 1.1KV grade PVC insulated XLPE Sheathed, GI wire/strip armoured copper conductor cable. The cable shall conform to IS 1554 part I with latest amendments.
Supply, Installation, Testing and Commissioning of 15kVA online UPS alongwith battery Bank and Stand with 30mins Backup including all connecting accessories etc as required.,Input Voltage : 433V, 50Hz Output Voltage : 230V, 50Hz
Wireless Access Controller for Wifi access points on Smart Poles High Performance Enterprise-Class Wireless Controller with 50 AP Support . With Firewall
SITC of control panel for SOS Panic Switch with 2 zone that Connection of up to total 256 devices with 01 Nos Hooter In Control Room, The module is automatically identified by the control panel and is run in default operating mode. The wiring of peripherals is connected by pluggable screw terminals, Auto-detection of zones. Operating voltage 20 V DC to 30 V DC Mechanics, Display element 14.5 cm (5.7”) multi-color TFT display, Operating element Touch screen, Interfaces must be, Ethernet,USB,RS232.
Supply of maintence free Chemical earthing consisting of upto 3 Mtr long ,17.2 mm dia, 250 micron copper bonded earth electrod made from high tensile low carbon steel core in accordance with national and international standards such as BS 651, BS 7430 and 467 connected togather with clamp alongwith 20 Kg of compound ( Chemical) for reducing the earth resistivity by about 50%. The earth pit shall be covered with Poly plastic heavy duty cover complete as required. (Make- Lightening Protection International Limited)
Supply and Laying of 315 mm dia ( OD-315 mm & ID -272 mm nominal) DWC Pipe ISI marked with all accessories like Socket. Bend, couplers etc. confirming to IS 16205 ( Part-24):2018 complete with fitting & cutting, joining etc. direct in ground (75 cm below ground level ) including excavation and refilling the trench but excluding sand Cushionning & protecttive covering etc complete as required.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/DWC/ HUME/ METAL pipe as required. Up to 25 sq mm
Supply of 8port industrial grade switch 10/100/1000 POE+ ports, and 2x 1/10G SFP+ ports, Full Wire Speed Layer2 Switching , Switch shous support 4GB RAM, 16GB Flash 8MB Packet buffer, The switch should supportminimum 4 port of PoE IEEE 802.3bt (60W per port) and 4 ports of 802.3at PoE (30W per port)., Dual DC power input and reverse power protection, Operating Temperature-40°C to +75°C,Rugged IP30 Enclosure, Port-based /tag-based VLAN,VLAN mirroring,bandwidth-56 Gbps, Store and forward, L2wire-speed/non-blocking switching engine, MAC Addresses- 8K,Jumbo Frames- 9K Bytes, pluggable sfpports-100/1000BaseX SFP Transceiver, Ethernet Ring Protection Switching (ERPS) support for rapid protection and recovery in a ring topology, Switch comes with an integrated trusted platform module (TPM) for platform integrity, Port Security — IP and MAC-based access control, IEEE 802.1X authentication.
FRIENDS ELECTRICALS (BID ID -411527)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.63 MB
SBD.pdf
Tender Documents • 1.80 MB
BOQ_106432.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid