REPAIRS / PAINTINGS TO CERTAIN ITEMS OF STEEL FURNITURE UNDER GE (NORTH) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Chair Varandah, Drg No. FD-333,19,256

Removing of Old/unsv cane from chair Verandah and Recanning of Chair Varandah mat pattern with 4 to 5 mm wide 0.5 mm thick half round new plastic cane white colour ( Make-Saha/Primer) as specified in drg and directed by Engr-in-Charge

M&L for welding of broken frame of chair verandah as and where required as specified and directed by Engr-in-charge

Removing of old u/s missing hard PVC shoes to chair verandah and S&F new PVC hard shoes.

Table Office Officer steel, Drg No. FD-1003

Removing old u/s top of table office officer steel and S&F of new top of Pre laminated particle board 18 mm thick exterior grade both side laminated with 4mm thick teak wood beading duly polished around the top complete all as specified and directed. Make of board Novapan/Archid/Bhutan Board/Century Ply

Taking out U/S drawer of table office officer steel and S&F new drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint ,rest all as per drg and directed by Engr –in-charge..

Removing U\S / damaged legs and S & F New leg made 25mm sqre conduit pipe of 1.6mm wall thickness and painted with synthetic enameled paint OG rest all as per drg and directed by Engr-in-Charge

M & L for welding of Broken frame steel of Table Office Offrs Steel as specified in drg and as directed by Engr-in-Charge.

Providing broken /missing PVC legs shoes best quality to leg of table office officer steel rest all as per drg and directed by Engr-in-Charge.

Table office Clk steel. Drg No. FD-1004

Removing old u/s top of table office clk steel and S&F of new top of Pre laminated particle board 18/19 mm thick exterior grade both side laminated with 4mm thick teak wood beading duly polished around the top complete all as specified and directed. Make of board Novapan/Archid/Bhutan Board/Century Ply

. Taking out U/S drawer of table office clk steel and S&F new drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint ,rest all as per drg and directed by Engr –in-charge..

Removing U\S / damaged legs and S & F New leg made 25mm sqre conduit pipe of 1.6mm wall thickness and painted with synthetic enameled paint OG over a coat of red oxide primer,rest all as per drg and directed by Engr-in-Charge

M & L for welding of Broken frame steel of Table Office clk Steel as specified in drg and as directed by Engr-in-Charge.

Providing broken /missing PVC legs shoes best quality to leg of table office officer steel rest all as per drg and directed by Engr-in-Charge.

Table Steel 3'X2' with &w/o drawer, Drg No. FD-1007 & 1008

Taking out old U/S existing top from Table Steel 3'X2' with &w/o drawer and S&F of new top made of 18 mm thick Pre Laminated particle board exterior grade both side laminated with 4mm thick teak wood beading duly polished around the top complete all as specified and directed Make of board Novapan/Archid/Bhutan Board/Century Ply

Taking out U/S drawer of table 3'x2' steel with drawer and S&F new drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint ,rest all as per drg and directed by Engr –in-charge..

Removing U\S / damaged legs and S & F New leg made 25mm sqre conduit pipe of 1.6mm wall thickness and painted with synthetic enameled paint OG over a coat of red oxide primer,rest all as per drg and directed by Engr-in-Charge

M & L for welding of Broken frame steel of Table 3'x2' Steel as specified in drg and as directed by Engr-in-Charge.

Removing of U/S PVC Leg Shoes of Table Steel 3'X2' with &w/o drawer and S&F of new PVC legs shoes of the same shape and size Rest all as per drg and directed by Engr-in-Charge

Table Steel 900x900x760mm Drg No. FD-1009

Taking out old U/S existing top from Table Steel (900 x900x760 mm) and S&F of new top made of 18 mm thick Pre Laminated particle board exterior grade both side laminated with 4mm thick teak wood beading duly polished around the top complete all as specified and directed Make of board Archid/Novapan/Bhutan Board/Century Ply

M & L for welding of Broken frame steel of Table 900x900x760 mm Steel as specified in drg and as directed by Engr-in-Charge.

S & F of 25 mm Sq ms tube 1.6 mm wall thickness 1100 mm long cross stiffener to table dining 900x900x760 mm steel 8” (inch) below from top frame by welding Rest all as directed by Engr-in-Charge.

Removing of U/S PVC Leg Shoes of Table Steel 900x900x760 mm and S&F of new PVC legs shoes of the same shape and size. Rest all as per drg and directed by Engr-in-Charge

Chair CB Steel with Arms. Drg No. FD-75

S&F new seats of new teak wood duly painted and Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CB steel with arms after removing existing damage/broken seat all as specified and as shown on drg.

S&F new back of new teak wood duly painted and Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CB steel with arms after removing existing damage/broken back all as specified and as shown on drg.

S&F new mild steel cleats of size 50 X 25 X3mm in replacement of old U/S cleats by welding to the frame complete of Chair CB steel with Arms duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint all as specified and as directed by Engr-in-Charge

Removing of old existing U/S cap and S&F new PVC cap for chair steel tumbler with arms.

Removing of U/S shoe and S&F new hard rubber shoes to chair steel tubler with arms with appropriate steel screw all as directed by Engr-in-Charge

Removing of old U/S arms and S&F new arms seasoned teak wood duly painted with steel screw appropriate size complete of Chair CB steel with Arms as specified and shown on drg all as directed by Engr-in-Charge

Chair CB Steel without Arms. Drg No. FD-75

S&F new seats of new teak wood duly painted and Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CB steel without arms after removing existing damage/broken seat all as specified and directed by Engr-in-charge

S&F new back of new teak wood duly painted and Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CB steel without arms after removing existing damage/broken back all as specified and as shown on drg.

S&F new mild steel cleats of size 50 X 25 X3mm in replacement of old U/S cleats by welding to the frame completeduly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint all as specified and as directed by Engr-in-Charge

Removing of old existing U/S cap and S&F new PVC cap for chair CB steel without arms.

Removing of U/S shoe and S&F new hard rubber shoes to chair CB steel without arms with appropriate steel screw all as directed by Engr-in-Charge

Teapoy Varandah:- Taking out old U/S top of teapoy varandah and S& F New Top made of 18mm thick prelaminated particle board exterior grade both side laminated (one side white laminated) and 4mm thick teak wood beeding al round the top duly polished (Make Navopan/Century/Archid/Bhutan Board) and repairing the entire frame including welding if required and painting two coats of white enamel paint after preparation of surface as specified in drg and directed by Engr-in-Charge Drg No. FD-255

Almira large steel/Med steel with shelves &1/2h &1/2s Drg No. FD-1031 & 1032

Taking out existing unserviceable locks almirah large/medium steel and S&F of new locks of six leavers of existing shape & size with duplicate keys of Make : Godrej /Harrison complete all as specified and directed.

Taking out broken/damaged handle of steel almirah and S&F of new handle of mild steel chromium plated of existing shape complete all as specified and directed.

Taking down existing unserviceable shelves of almirah large steel and S&F of new shelves made of 1mm thick mild steel of existing shape and size,duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint complete all as specified on drawing and directed.

All as per item 10.03 here in before but shelves of almirah medium steel

Taking out old unserviceabledoor hinges from almirah large/medium steel and S&F of new doorhinges mild steel 75/80 mm long complete all as specified and directed.

Taking down unserviceable cover locks from almirah large/medium steel and S&F of new cover locks made of 1mm thick mild steel of existing shape and size complete all as specified on drawing and directed.

Taking down unserviceable three way locking device & rod set from almirah large steel and S&F of new three way locking device & rod set of existing shape and size complete all as specified on drawing and directed.

All as per item 10.07 here in before but three way locking device & rod set of almirah medium steel

Dismantling of unserviceable legs of almirah large steel and S&F of new made of 1mm thick mild steel sheet of existing shape and size,duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint complete all as specified on drawing and directed.

All as per item 10.09 here in before but legs of almirah medium steel.

Locker Steel : Removal of following existing unserviceable components of Locker Steel or similar MES pattern or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including welding ,providing hinges, placing every part in-tactduly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint to the disturbed portion, as applicable as per drgs or as directed by Engr in Charge. . Drg No. FD-1029/257/ similar pattern

Handle

Hasp & Staple

Shelf

CP Hanging rod 19mm dia

Chair CB Steel with cushion seat and back:- Taking out old U/S Foam raxine and S&F new foam of 75 mm thick, 32 density duly covered with raxine of approved quality and colour on seat and back over 12mm thick plywood BWR grade commercial type of chair CBA steel cushion seat and back upholster work should be done exactly as per existing and painting with one coat of synthetic enameled paint OG over a coat of red oxide primer on exposed portion. Rest all as per drg and directed by Engr-in-charge. Drg No. FD-75

Chair computer (TP)

Taking out old UNSV seat and S&F New seat as per Drawing

Taking out old UNSV back and S& F New back as per Drawing

Taking out old UNSV Arms and S&F New Arms as per Drawing

Taking out old unsv Hydrolick system and S & F New Hydrolick systeam as per drg.

Taking out old UNSV Coaster wheel and S&F New coaster wheel as per Drawing

Chair revolving executive (TP)

Taking out old UNSV seat and S&F New seat as per Drawing

Taking out old UNSV back and S& F New back as per Drawing

Taking out old UNSV Arms and S&F New Arms as per Drawing

Taking out old UNSV Coaster wheel and S&F New coaster wheel as per Drawing

Taking out old UNSV Hydrolic system and S&F New hydrolic system as per Drawing

Charpoy GI Pipe

Removing of old unserviceable elbow from charpoy GI pipe and S&F new GI three way elbow 32mm dia med grade ISI marked to charpoy GI pipe complete all as specified and directed Make-Jolly / RI / RM /KI//ISI marked

Removing of old unserviceable check nut from charpoy GI pipe and S&F new GI check nut 32 mm dia 10mm thick to long/ short rail of charpoy GI pipe complete all as specified and directed

S&F in replacement of U/S long rail of charpoy GI Pipe 32mm dia medium grade heavy duty threaded on both ends all as specified and shown on drg and as directed by Engr-in-Charge Make Jindel/Tata/Prakash Surya

Cutting of dismantled old long rail of charpoy GI Pipe 32mm dia modifying into short rail by threaded both ends and ends fixing the same to charpoy GI pipe all as pecified and as directed by the Engr-in-Charge.

Cutting of dismantled old short rail of charpoy GI Pipe 32mm dia and modifying into legs by threading of ends and M&L for welding the clamps for FMN set and fixing the same to charpoy GI pipe all as specified and as directed by the Engr-in-Charges.

S&F new four Nos Iran flate size 25x6x220mm long to be fixed by welded in each corner of charpoy with long rail & short rail duly one hole in each iron flate duly black painted over a coat of red oxide steel primer for fixing by 6 mm dia 1 ½” long bolt of flat head with nut and washer directed by Engr-in-Charge.

S&F new Four Nos flate Iran size 25x6x850mm long to be fixed by welded in long rail in equal distance of charpoy duly two Nos holes in each iron flate duly black painted over a coat of red oxide steel primer for fixing of ply by 6 mm dia 1 ½” long bolt of flat head with nut and directed by Engr-in-Charge.

Removing of old/unsv ply wood 12mm thick and S&F new ply wood 12mm commercial face BWR greade and the ply duly polished on top of charpoy GI pipe size 1980x900mm (Make Archid/ Century) ISI Marked and directed by Engr-in-Charge.

Table Dinning ORs. Drg No FD-165(M)

Taking out old U/S top of Table dining OR and S&F new top of prelaminated particle board 18 mm thick exterior grade both side laminated with 4 mm thick teak wood beading duly polished around the top and welding the frame where as required and painted one coat of black enameled paint after scratching the old paint, complete all as shown in drg and directed by Engr-in-Charge ( Make-Archid /novapan/Century ply/bhutan board)

S&F of new Rubber shoes to be table Dinning Ors all as specified on drg

Book case steel with glass Drg No FD-90M & 1028

Taking out old UNSV handle and S&F New handle including nut and bolt with washer complete as per existing shape and size as per Drawing.

Taking out old UNSV/ rusted shelves and S&F New shelves dully painted complete as per existing shape and size as per Drawing.

Taking out old UNSV/ broken glass pan and S&F New glass pan 5 mm thick complete as per existing shape and size as per Drawing.

Taking out old UNSV lock and S&F New lock with duplicate key complete as per existing shape and size as per Drawing.

Bed hard Map Drg No FD/E6/MAP/08(R )

Bed hard Map : Removing the old unsv/broken existing plywood top from bed hard and S & F new Ply wood top of 12mm thick BWR grade commercial type , complete all as per existing shape and size as per drg. ((Make Archid/ Century) ISI Marked and directed by Engr-in-Charge.

Removing of Old brokne/unsv Stiffners and S & F New Stiffners of 25mmx25mm Ms sqr pipe of1.6mm wall thickness as per existing shape and sise (Set of Four) welded between long rails duly painted with two coats of black enelamed paint over a coat of red oxide primer, complete all as per drg and as directed.

Removing of Old broken/unsv PVC Shoes and S & F New PVC shoes as per existing shape and size as per drg and as directed by engineer in-charge.

Charpoy MS Tubing Drg No FD/MAP-II/01 & CWE/TEZ/FD-04

Removing the old unsv/broken existing plywood top from Charpoy MS Tubuing and S & F new Ply wood top of 12mm thick BWR grade commercial type , complete all as per existing shape and size as per drg. ((Make Archid/ Century) ISI Marked and directed by Engr-in-Charge.

Removing of Old brokne/unsv Stiffners and S & F New Stiffners of 25mmx25mm Ms sqr pipe of1.6mm wall thickness as per existing shape and sise (Set of Four) welded between long rails duly painted with two coats of black enelamed paint over a coat of red oxide primer, complete all as per drg and as directed.

Removing of Old broken/unsv PVC Shoes and S & F New PVC shoes as per existing shape and size as per drg and as directed by engineer in-charge.

Table Computer MAP - Removing of Old broken/unsv Top,Drawer with sliding channel,sliding board with telescopic channel ,Sides and Shoes from Table computer and S & F New Top,Drawer with telescopic channel,sliding board with telescopic channel ,sides and shoes as per existing shape and size as per drg and as directed by Engineer in-charge. Drg No FD/E6/MAP/03

Painting M&L for preparation of old painting steel surfaces of any descripting exceeding 10cm width on girth inner side and outer side by cleaning with abrasive cloth, removing dirt, denting deparession if any, applying putty for smooth surfaces for painting and applying a coat of olive green / grey/black/white synthetic enamel paint on both side for glossy finish inside and outside complete all as specified and as directed at site.

Almira Large Seel

Almirah Med Steel

Bed Hard steel

Book case steel with glass

Chair CB Steel with arms

Chair CB Steel without arms

Charpoy MS Tubing

Chair Verandah

Chair CB Steel Padded

Locker Steel

Ladder for loft

Rack steel 6 tier

Side Rack with tray 3/4 space steel

Stool steel

Shoe Rack steel

Table 3'x2' with or without dr steel

Table 3'x3' steel

Table Office Clk Steel

Table Offie Offrs steel

Teapoy Verandah

M/s Singh Furniture Mart

Techno India Enterprises