Deck Crane repairs of MV Viswa Vijeta

Amount

D21028 GRABS: WORK TO BE CARRIED OUT AS SPECIFIED BELOW ON ALL 04 GRABS. MAKE :ARUL

GRABS TO BE TAKEN ASHORE CAREFULLY AND TO BE KEPT AT SUITABLE PLACE FOR OVERHAULING(DUST FREE) HAVING FACILITY OF OVERHEAD CRANES WITH A CLEAR WORKING PLACE AND HEIGHT MIN. 6 METERS. GRABS TO BE ADEQUATELY ANCHORED PRIOR TO REMOVAL OF ANY PINS TO AVOID DISTORTION AND MISALIGNMENT. CRANE TRANSPORTATION INCLUDED ALL SPARES SHIP SUPPLY

TO CARRY OUT LOAD TESTING OF GRABS

TO CHECK / INSPECT WIRE SECURING POINTS FOR WASTAGE & WELDING. RENEW AS REQUIRED

TO RENEW BRIDLE WIRE ROPES OF ALL GRAB WITH SHIP SUPPLY WIRE ROPES

BOTH THE RAMS OF THE EACH GRABS(4x2=8 RAMS)TO BE COMPLETELY STRIPPED. THE PISTON ROD CONDITION TO ASSESS, PISTON TO BE CHROME COATED TO ORIGINAL DIAMETER AND BARREL TO BE HONED TO THE REQUIREMENTS. THE RAMS TO ASSEMBLE AND TESTED FOR THE SATISFACTORY OPERATIONS OF OWNER/SHIP STAFF/SURVEYOR . QUOTE AS PER ONE GRAB OVERHAUL AND ALL FOUR GRABS TO BE OVERHAULED

TO CLEAR AND RENEW GREASE NIPPLES YARD SUPPLY

D 21029 CARGO HANDLING EQUIPMENT - CRANES, SHEAVES, GRABS HOOKS. CRANES MAKE : MACGREGOR CARGO CAPACITY CRANES 36 TON

FLOATING BLOCK SHEAVES OF ALL CRANE TO BE INSPECTED FOR THINNED DOWN SHEAVES,BUILD UP IF REQUIRED,OVERHAULED AND FITTED BACK BY RENEWING THE SHIP SUPPLIED BEARINGS. ALL NUT BOLTS SS TO BE RENEWED WITH YARD SUPPY.

JIB HEAD ASSEMBLY TO BE REMOVED FROM PLACE AND DISMANLTED, OVERHAULED AND FITTED BACK IN PLACE . . SHEAVES(7x4=28) TO BE INSPECTED, BUILT UP AS REQUIRED, OVERHAULED AND FITTED BACK WITH SHIP SUPPLIED BEARINGS. ALL FOUNDATION BOLTS TO BE RENEWED WITH YARD SUPPLIED SS BOLTS.QUOTE FOR ONE JIB HEAD ASSEMBLY OVERHAULING AND 4NOS REQUIRED.

CRANE TOP ASSEMBLY TO BE REMOVED FROM PLACE AND DISMANLTED, OVERHAULED AND FITTED BACK IN PLACE . . SHEAVES TO BE INSPECTED, BUILT UP AS REQUIRED, OVERHAULED AND FITTED BACK WITH SHIP SUPPLIED BEARINGS.ALL FOUNDATION BOLTS TO BE RENEWED WITH YARD SUPPLIED SS BOLTS. QUOTE FOR ONE CRANE TOP ASSEMBLY OVERHAULING AND 4NOS REQUIRED

TO RENEW DAMAGED OPERATORS CABIN DOOR LOCKING ARRANGEMENT IN ALL 4 CRANES.

CRANE CABIN TOUGHENED GLASSES TO BE RENEWED ALONG WITH CLOSING LEVERS.

TO RENEW GREASE NIPPLES OF CRANES & JIBS. YARD SUPPLY

ALL LUBRICATING POINTS TO MAKE FREE AND LUBRICATE USING YARD PUMP TO THE SATISFACTION OF SHIP'S STAFF/SUPERINTENDENT. GREASE OWNER'S SUPPLY.

TO RENEW JIB FOOT BEARING OF ALL FOUR CRANE( TWO BEARINGS IN EACH CRANE). BEARING SHIPS SUPPLY.

TO INSPECT ALL FOUR CRANES SLEWING BEARING , IF REQUIRED SAME TO BE RENEW. YARD TO ARRANGE SLEWING BEARING IF REQUIRED

HYDRAULIC TANK OIL OF ALL FOUR CRANES TO BE REMOVED FROM TANKS. TANKS TO BE CLEANED UP TO STAISFACTION OF SHIP's STAFF AND ALL FILTERS FOR EACH TANK TO RENEW(SHIP SUPPLY) & SAME OIL,IF FOUND OK, TO BE PUT BACK IN TANKS.ALL FOUR CRANES,LUB OIL COOLER(RADIATOR) T0 BE TAKEN OUT FROM PLACE,TRANSPORTED TO WORKSHOP,CLEANED,PR.TESTED AND FITTED IN PLACE.TANK LEVEL INDICATOR TO BE CLEANED. QUOTE TO BE INCLUSIVE OF ALL CONSUMABLES MATERIAL, LABOUR , TRANSPORTATION, STAGGING IF ANY, ETC

ALL 4 CRANES BRAKE CONTROL HYDRAULIC V/VS TO OVERHAUL.

HOISTING WINCH BRAKES TO BE OVERHAULED

LUFFING WINCH BRAKES TO BE OVERHAULED

HOISTING REDUCTION GEAR BOX- 4 NOS TO BE OVERHAULED

LUFFING REDUCTION GEAR BOX-4 NOS TO BE OVERHAULED

ALL CRANE SLEWING BEARING STUD BOLTS OF ALL 4 DECK CRANES TIGHTNES TO BE CHECKED AS PER INSTRUCTION MANUAL.

CRANES HYDRAULICS CIRCUITS PR. TO BE CHECKED AT ALL RECOMMENDED PR. POINTS. HYDRAULIC PUMPS ( 3NOS) AND HYDRAULIC MOTORS (3NOS) OF ALL THREE HYD CIRCUITS IN EACH CRANE TO BE OVERHAULED. QUOTE LUMP SUM FOR ONE CRANE . WORKSCOPE APPLICABLE FOR FOUR CRANES

PROVISION CRANES - ER OVERHEAD CRANE DAVITS

EXISTING WIRES TO REMOVE AND OWNER SUPPLY NEW WIRES TO RIG IN PROVISION CRANE AND ER CRANES.

SUEZ CANAL LIGHT(SINGLE ARM DAVIT) DAVIT ALL FITTINGS CEASED AND DAVIT INOPERATIONAL. TO MAKE DAVIT OPERATIONAL, RENEW ALL PULLEYS, WIRE, OVERHAUL OR RENEW WINCH,ONLY MANUAL OPERATION

BUNKER DAVIT(SINGLE ARM DAVIT) ALL FITTINGS CEASED AND DAVIT INOPERATIONAL. TO MAKE DAVIT OPERATIONAL, RENEW ALL PULLEYS, WIRE, OVERHAUL OR RENEW WINCH,ONLY MANUAL OPERATION

PERIODICAL LOAD TEST OF FOLLOWING LIFTING GEAR TO BE CARRIED OUT AND REGISTER OF MACHINERY AND CHAINS TO BE ENDORSED BY COMPETENT AUTHORITY/ DNV/IRS SURVEYOR

CARGO HANDLING CRANES - SWL 36 T

PROVISION CRANES - SWL 4.0 T

E/R OVERHEAD CRANE; SWL 3 T;

SUEZ SEARCH LIGHT DAVIT; SWL 0.5 T;

BUNKER HOSE LIFTING DAVIT,SWL0.5 T

LOOSE GEARS TO LOAD TEST AND CERTIFICATE TO ISSUE.

CHAIN BLOCK (1T; 2T; 3T; 5T)

EYE BOLTS

WIRE SLING (1T; 2T; 3T ETC)

CHAIN SLING (ASSORTED SWL)

ALL HUDRAULIC RAM PURGE SCREW TO RENEW AND FIT NEW

ALL GREASING POINT OF CRANE TO BE FREED

VENKATESWARA ENGINEERING WORKS

indomarine

DYNATRON SERVICES PVT. LTD.

M/s Kalyani Marine And Industrial Engineers