CPPP

Active

Works

Civil Works

Name of work Modernization/Upgradation of existing parks/green belts. SH. Providing and laying of irrigation pipeline network, installation/placement of water storage tanks, and execution of other miscellaneous civil works for the Eco-Restoration Pro

Delhi Development Authority

Horticulture Civil Division-IV, Nehru Place ND | South East Delhi, Delhi

Amount: ₹57.1 LCloses: 6 Oct 20264d left

Timeline

Published29 Sept 2026
Closes6 Oct 2026
Bid Opening6 Oct 2026

Tender Value

₹57.1 L

EMD Value

₹1.1 L

Closing Date

6 Oct 2026, 3:00 pm4d left

Tender Inviting Organisation

Name

Executive Engineer

Address

EE, Horticulture Civil Division-IV, Nehru Place ND

Work Description

Name of work Modernization/Upgradation of existing parks/green belts. SH. Providing and laying of irrigation pipeline network, installation/placement of water storage tanks, and execution of other miscellaneous civil works for the Eco-Restoration Pro

Tender Information

Tender ID

2026_DDA_928232_1

Reference Number

24/EE/HCD-4/DDA/2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

60 days

Location

Horticulture Civil Division-IV, Nehru Place ND

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical

RequiredScanned copy of Enlistment Order of the Contractor. (.pdf)

RequiredProof of e-tendering fee annually deposited with CRB cell of DDA. (.pdf)

RequiredScanned copy of Certificate of Registration for GST in Delhi or Undertaking If the bidder has (.pdf)

RequiredTender Acceptance Letter (To be given on Company Letter head). (.pdf)

RequiredCopy of certificate of registration with EPFO and ESIC. (.pdf)

RequiredThe tenderers are required to furnish an undertaking on letter head as under (.pdf)

RequiredScanned copy of Cancelled Cheque (.pdf)

RequiredScanned copy of Earnest Money deposited on DDAs IFMIS https//ifmis.dda.org.in. (.pdf)

Finance

RequiredPrice Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹1.1 L

Important Dates

Last Activity

29 Sept 2026

Published

29 Sept 2026

Bid Opening

6 Oct 2026

Download Starts

29 Sept 2026

Download Ends

6 Oct 2026

Submission Starts

29 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (33 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing, laying, jointing and testing of HDPE water supply pipes for external works, PE-100 grade conforming to IS 4984:2016, PN-6, of approved make, including all required factory-fabricated/moulded HDPE fittings and specials, suitable for butt fusion/flange jointing; fittings rated PN-10 and above; including mechanical/manual trench excavation, protection, laying, heat/butt fusion jointing with necessary equipment and re-jointing, thrust blocks, LDPE/PVC fluorescent, backfilling in layers with watering and compaction, disposal of surplus earth, carriage, leads, lifts and all incidental works, complete as per approved drawings, CPWD specifications and directions of Engineer-in-Charge. (a) HDPE Pipe 90mm OD-PE100-PN6	2,800	m	733.65	₹20,54,220
2	Providing, laying, jointing and testing of HDPE water supply pipes for external works, PE-100 grade conforming to IS 4984:2016, PN-6, of approved make, including all required factory-fabricated/moulded HDPE fittings and specials, suitable for butt fusion/flange jointing; fittings rated PN-10 and above; including mechanical/manual trench excavation, protection, laying, heat/butt fusion jointing with necessary equipment and re-jointing, thrust blocks, LDPE/PVC fluorescent warning tape, backfilling in layers with watering and compaction, disposal of surplus earth, carriage, leads, lifts and all incidental works, complete as per approved drawings, CPWD specifications and directions of Engineer-in-Charge. (a) HDPE Pipe 75 mm OD-PE100-PN6	1,650	m	484.5	₹7,99,425
3	Providing, laying, jointing and testing of HDPE water supply pipes for external works, PE-100 grade conforming to IS 4984:2016, PN-6, of approved make, including all required factory-fabricated/moulded HDPE fittings and specials, suitable for butt fusion/flange jointing; fittings rated PN-10 and above; including mechanical/manual trench excavation, protection, laying, heat/butt fusion jointing with necessary equipment and re-jointing, thrust blocks, LDPE/PVC fluorescent warning tape, backfilling in layers with watering and compaction, disposal of surplus earth, carriage, leads, lifts and all incidental works, complete as per approved drawings, CPWD specifications and directions of Engineer-in-Charge. (a) HDPE Pipe 63 mm OD-PE100-PN6	1,650	m	318.4	₹5,25,360
4	Providing, laying, jointing and testing of HDPE water supply pipes for external works, PE-100 grade conforming to IS 4984:2016, PN-6, of approved make, including all required factory-fabricated/moulded HDPE fittings and specials, suitable for butt fusion/flange jointing; fittings rated PN-10 and above; including mechanical/manual trench excavation, protection, laying, heat/butt fusion jointing with necessary equipment and re-jointing, thrust blocks, LDPE/PVC fluorescent warning tape, backfilling in layers with watering and compaction, disposal of surplus earth, carriage, leads, lifts and all incidental works, complete as per approved drawings, CPWD specifications and directions of Engineer-in-Charge. (a) HDPE Pipe 50 mm OD-PE100-PN6	3,000	m	276.85	₹8,30,550
5	Providing & Fixing of 3/4" One piece Plastic QCV. It has auto close lid made of heavy duty rubber when QCV is not in use, one piece construction, having stainless steel spring, plastic valves.	175	each	830.55	₹1,45,346.25
6	Providing & Fixing of 3/4" plastic QCV Key with handle with 3/4" outlet.	40	each	242.25	₹9,690
7	Providing & Fixing of 3/4" plasstic QCV Key Brass swivel elbow.	40	each	442.95	₹17,718
8	Providing & Fixing of Service Saddle 90, 63, 50 mm X 3/4".	175	each	588.3	₹1,02,952.5
9	Providing & Fixing of 3.0" Hybrid plastic Wafer Type butterfly Valve for isolation. The Butterfly valve should be as per manufacturing standard IS: 13095. It shall be with integral synthetic rubber lining. Body made of high quality PVC for streanth and chemical resistance, disc, Allen screw, lock plate Knurling pin made of stainless steel SS-304. It shall be lever operated quarter turn and offers bi-directional smooth operation. The hydraulic body test pressure of the Hybrid plastic buffer type Butterfly Valve is 15 bar and hydraulic seat test pressure of the product is 10 bar at temperature range 5° C to 50° C	5	each	3,737.4	₹18,687
10	Providing & Fixing of 2.5'' Hybrid plastic Wafer Type butterfly Valve for isolation. The Butterfly valve should be as per manufacturing standard IS: 13095. It shall be with integral synthetic rubber lining. Body made of high quality PVC for streanth and chemical resistance, disc, Allen screw, lock plate Knurling pin made of stainless steel SS-304. It shall be lever operated quarter turn and offers bi-directional smooth operation. The hydraulic body test pressure of the Hybrid plastic buffer type Butterfly Valve is 15 bar and hydraulic seat test pressure of the product is 10 bar at temperature range 5° C to 50° C	2	each	3,322.15	₹6,644.3

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 3.04 MB

Work Item Documents

NIT-24.pdf

Tender Documents • 2.11 MB

BOQ_975475.xls

BOQ • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing, laying, jointing and testing of HDPE water supply pipes for external works, PE-100 grade conforming to IS 4984:2016, PN-6, of approved make, including all required factory-fabricated/moulded HDPE fittings and specials, suitable for butt fusion/flange jointing; fittings rated PN-10 and above; including mechanical/manual trench excavation, protection, laying, heat/butt fusion jointing with necessary equipment and re-jointing, thrust blocks, LDPE/PVC fluorescent, backfilling in layers with watering and compaction, disposal of surplus earth, carriage, leads, lifts and all incidental works, complete as per approved drawings, CPWD specifications and directions of Engineer-in-Charge. (a) HDPE Pipe 90mm OD-PE100-PN6

2,800

733.65

₹20,54,220

Providing, laying, jointing and testing of HDPE water supply pipes for external works, PE-100 grade conforming to IS 4984:2016, PN-6, of approved make, including all required factory-fabricated/moulded HDPE fittings and specials, suitable for butt fusion/flange jointing; fittings rated PN-10 and above; including mechanical/manual trench excavation, protection, laying, heat/butt fusion jointing with necessary equipment and re-jointing, thrust blocks, LDPE/PVC fluorescent warning tape, backfilling in layers with watering and compaction, disposal of surplus earth, carriage, leads, lifts and all incidental works, complete as per approved drawings, CPWD specifications and directions of Engineer-in-Charge. (a) HDPE Pipe 75 mm OD-PE100-PN6

1,650

484.5

₹7,99,425

Providing, laying, jointing and testing of HDPE water supply pipes for external works, PE-100 grade conforming to IS 4984:2016, PN-6, of approved make, including all required factory-fabricated/moulded HDPE fittings and specials, suitable for butt fusion/flange jointing; fittings rated PN-10 and above; including mechanical/manual trench excavation, protection, laying, heat/butt fusion jointing with necessary equipment and re-jointing, thrust blocks, LDPE/PVC fluorescent warning tape, backfilling in layers with watering and compaction, disposal of surplus earth, carriage, leads, lifts and all incidental works, complete as per approved drawings, CPWD specifications and directions of Engineer-in-Charge. (a) HDPE Pipe 63 mm OD-PE100-PN6

1,650

318.4

₹5,25,360

Providing, laying, jointing and testing of HDPE water supply pipes for external works, PE-100 grade conforming to IS 4984:2016, PN-6, of approved make, including all required factory-fabricated/moulded HDPE fittings and specials, suitable for butt fusion/flange jointing; fittings rated PN-10 and above; including mechanical/manual trench excavation, protection, laying, heat/butt fusion jointing with necessary equipment and re-jointing, thrust blocks, LDPE/PVC fluorescent warning tape, backfilling in layers with watering and compaction, disposal of surplus earth, carriage, leads, lifts and all incidental works, complete as per approved drawings, CPWD specifications and directions of Engineer-in-Charge. (a) HDPE Pipe 50 mm OD-PE100-PN6

3,000

276.85

₹8,30,550

Providing & Fixing of 3/4" One piece Plastic QCV. It has auto close lid made of heavy duty rubber when QCV is not in use, one piece construction, having stainless steel spring, plastic valves.

175

each

830.55

₹1,45,346.25

Providing & Fixing of 3/4" plastic QCV Key with handle with 3/4" outlet.

each

242.25

₹9,690

Providing & Fixing of 3/4" plasstic QCV Key Brass swivel elbow.

each

442.95

₹17,718

Providing & Fixing of Service Saddle 90, 63, 50 mm X 3/4".

175

each

588.3

₹1,02,952.5

Providing & Fixing of 3.0" Hybrid plastic Wafer Type butterfly Valve for isolation. The Butterfly valve should be as per manufacturing standard IS: 13095. It shall be with integral synthetic rubber lining. Body made of high quality PVC for streanth and chemical resistance, disc, Allen screw, lock plate Knurling pin made of stainless steel SS-304. It shall be lever operated quarter turn and offers bi-directional smooth operation. The hydraulic body test pressure of the Hybrid plastic buffer type Butterfly Valve is 15 bar and hydraulic seat test pressure of the product is 10 bar at temperature range 5° C to 50° C

each

3,737.4

₹18,687

Providing & Fixing of 2.5'' Hybrid plastic Wafer Type butterfly Valve for isolation. The Butterfly valve should be as per manufacturing standard IS: 13095. It shall be with integral synthetic rubber lining. Body made of high quality PVC for streanth and chemical resistance, disc, Allen screw, lock plate Knurling pin made of stainless steel SS-304. It shall be lever operated quarter turn and offers bi-directional smooth operation. The hydraulic body test pressure of the Hybrid plastic buffer type Butterfly Valve is 15 bar and hydraulic seat test pressure of the product is 10 bar at temperature range 5° C to 50° C

each

3,322.15

₹6,644.3