CA NO. CWE/HILLS/KRT/36 OF 2025-2026 REPAIR TO CERTAIN B/R WORKS AND REPAIR/MAINT OF INTERNAL ELECTRIFICATION WK IN CERTAIN BLDGS AT KAUSANI MIL STN UNDER GE RANIKHET

Amount

Dismantling of plain or corrugated steel sheeting, any gauge thickness, including nainital or similar pattern roof coverings complete all as specified and directed.

S&F of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F of Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards ( fiber, pulp, insulation etc,) or insulation boards / slab/ blankets, any thicknesss including cover fillet complete all as specified and directed.

S&F for powder coated aluminium anodised snap grid system of grid size 600 x 600 mm fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the main Tee 28x 24x 3mm thick, Cross Tee 28 x 24x 3mm thick and wall angle 24 x 24x 3 mm thick sections complete all as specified and directed.

M&L for 4 mm thick High Pressure steam cured Non-asbestos fibre cement building boards fixed or laid / inserted to timber / GI / Aluminium framework with screws in ceiling complete all as specified and directed.

M&L for 9mm thick plywood, graded BWR, type BB fixed with rawl plug and screws to timber framework fixed as in repair of any thickness complete all as specified and directed.

S&F Cover fillets 4.5mm thick of standard hard board, 40mm wide, and fixing with screws as in framework for plywood in wall cladding complete all as specified & directed.

S & F in repairs 6mm thick decorative PVC Sheet hollow (design approved by GE) for insulation and acoustic purpose on wall surface, screw to timber frame work for levelling of wall as reqd, including with panelling to vertical surfaces, fixed with rawl plug and screws complete all as specified and directed

Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Vitrified ceramic tiles 9 to10 mm thick (Square / rectangular) light shade polished area of each tiles not exceeding 0.36 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the colour tiles complete all as specified & directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.complete all as directed.

M&L for Non skid Coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) area of each tile exceeding 0.06 sqm but not exeeding 0.11 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified & directed by Engr-in-charge.

M&L for glazed ceramic coloured tiles 200x300mmx7mm thick on wall/vertical surfaces such as skirting, dados and riser to steps etc including laid over 10mm thick 1:4 cement mortar for laying wall/vertical finish set and jointed in neat cement slurry and pointed in white or coloured cement to match all complete all as specified & directed by Engr-in-charge.

M&L for glazed ceramic coloured tiles 300x450mmx7mm thick on wall/vertical surfaces such as skirting, dados and riser to steps etc including laid over 10mm thick 1:4 cement mortar for laying wall/vertical finish set and jointed in neat cement slurry and pointed in white or coloured cement to match all complete all as specified & directed by Engr-in-charge.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified & directed by Engr-in-charge

Taking down cement / lime plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed

M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:6 finished even & smooth without extra cement on internal wall surface complete.

M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement including mixing only water proofing compound as per manufacturer instruction on external wall complete. Note:- WPC will be measured & Paid separately

Supply only integral water proofing compound

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment , plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper white or tinted over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment , plastered or un-plastered surfaces of walls and applying two coats of cement base paint white or tinted over a coat of primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width/girth and applying one coats of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old wooden surfaces of any description and applying one coats of synthetic enamel paint over a coat of pink primer comple all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded, pointed in mortar etc complete all as specified & directed.

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4), including molding, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including nosing whrere required and 10 mm thick screed bed or bedding layer of mortar 1:4 for laying floor finishes complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and above in any position, unframed work complete all as specified and directed.

M&L 2nd class hard wood as in scantling clean sawn as in floor/roof/truss/purlin & similar work of any description in framed work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F rolled mild steel Fe-410-W(Gde-E-250)quality-B, as in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. all as specified and directed.

Taking down chowkats or frames not exc.1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed

Description complete all as per Item No.34 here in before, but exc. 1.5 sq. m but n exc 4 sqm each complete all as specified and directed.

Taking down shutters ( per leaf ) of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n. exc. 2 sqm each complete all as specified and directed

S & F 2nd class Hard Wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, and making good with existing surface as complete as specified and directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze without sash bars, edges of framing plain fitted with cut and mitred beads for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(a) fitted to chowkats, complete as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both faces are covered with decorative face veneer with lipping/frame to match complete all as specified & directed.

S&F 30 mm thick second class hard wood glazed and skelton window and ventilators shutters open rebated and prepaired to received glass gauge etc divided into square with sash bar edges of framing plain chamfered or rounded fitted with cut and mittered beads for sequring glass gauge etc , size of members of shutters as specified in MES SSR -I section 8 clause 8.24 (b) complete all as spcified and directed

S&F sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in each panel 5.5 mm thick complete all as per specified and directed.

S & F Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.

Supply and fixing 75 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete as specified and directed.

Supply and fixing 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete as specified and directed.

Supply and fixing 100 mm mild steel pressed handles, oval type, stove enamelled black and fixed with wooden screws, complete as specified and directed.

Supply and fixing 150 mm mild steel pressed handles, oval type, stove enamelled black and fixed with wooden screws, complete as specified and directed.

M&L for mild steel barrel tower bolts stove enameled black, with bright bolt length of bolt 100 mm (ISI marked) fixed complete fixed with screws,complete as specified and directed.

M&L for mild steel barrel tower bolts stove enameled black, with bright bolt length of bolt 150 mm (ISI marked) fixed complete fixed with screws,complete as specified and directed.

Supply and fixing mild steel sliding door bolt clip type (ISI Marked) stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts, length of bolt 250 mm and fixed with mild steel wood screws all as specified and directed

M&L 18/19 mm thick prelaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard with teak beading of all sides fixed in repair complete all as specified and directed.

Supply and fix Continuous (piano) hinges width 30 mm mild steel , bright finish or eletrogalvanised complete all as specified

M&L preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and directed.

S&F in repair 25 mm dia curtain rod/harrison rails,mild steel, chromium plated fancy type fixed with end brackets, stops ,rollers & all connected accessories complete all as specified and directed.

Dismantling PVC water tanks and removing from site capacity for exc 250 ltrs but n. exc 500 ltrs complete all as specified and as directed.

M&L for rotational moulded polyethylene water storage tank 500 ltrs capacity double layered cylindrical vertical with closed top hoisted and fixed in position including fittings all as specified and as directed.

S&F 20mm bore ball valve, high pressure with epoxy coated aluminium rod and high density plastic vavle screwed for iron pipe and fixed of 20mm dia (min wt 210 grms) complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed

Supply and fix 15 mm bore galvanized steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all as specified and as directed by Engineer-in-Charge.

S&F in repair single piece EWC combined with flushing cistern, waste pipe, trap, seat cover, jet spray including all necessary accessories, fittings & bolts complete all as specified & directed. Make- Jaguar lyric single piece EWC P-180

S&F in repair bathroom tabletop ceramic washbasin (Size not less than 500x300x125mm) over marble counter and BWR plywood cabinet (white) as approved by GE with waste pipe, coupling and fittings complete all as specified & directed.

S&F in repair fancy hand shower cast copper alloy 100mm round- standard size, chromium plated screwed down high pressure with or without lettered Hot or cold with length not less than 1.0 mtr screwed shanks and fly nuts, screwed foriron pipe/stope valve and fixed complete.

S&F in repair brass CP Stop valve/ Angle valve 15 mm fancy type with long shank and cup fixed.

S&F in repair soap dish tray embedded in wall , vitreous china white, approximate size 160x160x90 mm complete all as specified & directed.

S&F for PVC connection 15mm size with brass nuts of length 450mm complete all as specified & directed.

S&F in repair towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified & directed.

S&F in repair 15mm bore fancy type chromium plated central hole wash basin mixer with 450mm long braided hoses,screwed down high pressure with or without lettered hot and cold srcrewed for iron pipe complete all as specified & directed.

S & F in repairs 15 mm bore Fancy type Telephonic Shower (Healthfaucet), Cast Copper alloy, with chromium plated, screwed down high pressure with or without lettered Hot or Cold with lenght not less than 1.0mtr long screwed shanks and fly nuts, screwed for iron pipe/stop value and fixed complete all as specified and as directed. Make:- Prayag Cat No 455 or equavalent in Hindware/ Jaguar

S&F in repair fancy type 15 mm dia Pillar taps ,cast copper alloy ,with capstan heads chromium plated screwed down high pressure, with or without letterd HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F in repair vitreous china wash down water closet pan (padestal pattern) with seat cover (excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and as directed.

S&F in repair flushing cistern 10Ltr capacity PVC valveless, syphonic action type, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified & directed.

S&F in repair for Wash basins, Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and as directed.

S&F in repair 32 to 40 mm dia PVC waste pipe for wash basin and kitchen sink complete all as specified and directed.

S&F in repair 15 mm dia bib tap cast copper alloy, fancy type chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as directed.

S&F in reparis 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed with and including wall flange (Minimum weight 15mm-90gms)complete all as specified and as directed.

Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, lamp holders, bracket, light fittings, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed.

S & F point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core multi-stranded) copper conductor cable (FRLS) drawn into and including PVC casing capping/ PVC conduit pipe of suitable size with its all necessary fittings and accessories on wooden / stone / brick masonry wall surface and sunk cast iron or pressed steel terminal boxes modular for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with and including cover plate of required module including one continuous run of PVC insulated (green colour) 1.50 sqmm size solid copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed.

All as per item No. 79 hereinbefore but wiring for one 3 pin 5 Ampere socket outlet point on the same board, controlled by other switch complete all as specified and directed.

All as per item No. 79 hereinbefore but wiring for one 3 pin socket outlet 5 amps independent with cable 1.5 sq mm size.

All as per item No. 79 hereinbefore but wiring for one 3 pin 15 Ampere socket outlet point using 2.50 sqmm size wire and earth wire of PVC insulated ( green colour) 1.50 sqmm size solid copper conductor cable on the independent board complete all as specified and directed.

S & F of switch piano flush type single pole one-way 5 Ampere complete all as specified and directed.

S & F of switch piano flush type single pole one-way 15 Ampere complete all as specified and directed.

S & F of 5 Ampere socket outlet flush type, multi purpose suitable for 2 and 3 pins (Total 5 Pins) complete all as specified and directed.

S & F of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Ampere flush type with shuttered complete all as specified and directed.

S&F of lamp holder PVC / polycorbonate type insulated body with back plate suitable for batten fitting / angle fitting complete all as specified and directed.

S & F of ceiling rose, surface bakelite, 65 X 50 mm, 3 terminals complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed. Make : Havells Cat Part No LHFOAJE1TN1I060 or equivalent in Philips/ Crompton/ Wipro/ Bajaj

S & F of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 4 ways with 200 ampere rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and directed.

S & F of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 ampere rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and directed.

S & F of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 12 ways with 200 ampere rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN of 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioningcomplete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN of 40 to 63 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing 10 Watt garden light unique concept LED Bollard in IP 66 to ensure sustainable performance in all section and aesthetics which keeps the surrounding lively incl required excavation and PCC work (1:3:6) type C-2 complete all as specified and directed. Make : Havells (Cat Part-TURINBLS10WLED830PSYMTOPC or equivalent in Philips/ Crompton/ Bajaj/ Wipro

Supply and fixing 25 Watt gate light aesthetically designed IP 65 LED post top family energy saving, powered with high power LEDs as light source clear cover with symmetrical light distribution including PCC work (1:3:6) type C-2 as required complete all as specified and directed. Make : Havells (Cat Part-RUBYPT25WLED830SSYMTOPC or equivalent in Philips/ Crompton/ Bajaj/ Wipro

Supply & Fixing in replacement bldg security light luminaires including 25 watt LED street light for 220-230 V, 50 Hz with IP 65 protection including bracket for fixing in wall, made of 25mm bore light grade GI Pipe connecting up with three core twisted flexible copper conductor cable complete all as specified and directed.

Joshi Constructions (BID ID -3348907)