Rate Contract for Carpentry works under ship repairs at HSL

Amount

MFMB Insulation : Removal of existing insulation, and replace with new insulation (including FRP taping of all the joints as per the working practice) Material description:(MFMB SHEET 1" /MFMB SHEET 2" ) + FEVECOL

25mm thick and below in a single layer

Above 25mm to 50mm thick in a single layer

75mm thick in two layers (25mm + 50mm)

100mm thick in two layers (50mm + 50mm)

Removal of MFMB insulation

Removal of glue (rubber solution) from the BHDs/decks/stiffeners by scraping with carpentry tools like chisels, grinding etc. to the bare metal state.

Rock wool / Spintex insulation: Removal of existing insulation, and replace with new insulation to the satisfaction of ship staff / HSL / Surveyor.

50mm thick and below in a single layer

100mm thick and below in a single layer

Above 100 - 200mm thick in two layers

A-60 insulation in two layers (40mm+40mm)

Above 100-200mm thick in two layers

Pin welding if required (applicable in case of renewed plates only) for carry out the Spintex /MFMB insulation.

Removal of Rock wool insulation only of any thickness.

Rock wool / Spintex insulation: Removal and re-fixing of existing insulation, to the satisfaction of ship staff / HSL / Surveyor.

50mm thick and below in a single layer

100mm thick and below in a single layer

Above 100 - 200mm thick in two layers

Hot lagging including covering with Canvas/ FRP Cloth :

Removal of exsiting insulation on all exhaust pipes of ME / DA and re insulation in two/three layers and covered with canvas / FRP cloth as required.

Up to 50mm dia pipe

above 50mm to 100mm dia pipe

above 101 mm Dia and up to 200 mm dia pipe

above 201 mm Dia and up to 300 mm dia pipe

above 301 mm Dia pipe

Flange MUFFS

200 mm and below pipe dia

Above 201mm and up to 600 mm dia pipe

Above 601 mm and up to 1000 mm dia pipe

Bellow MUFFS

200 mm and below pipe dia

Above 201mm and up to 600 mm dia pipe

Above 601 mm and up to 1000 mm dia pipe

Securing strips for hot lagging if required

Metal Cladding for above :

Removal of existing metal cladding on exhaust pipes of ME / DA and re cladding (renewal) with GI / Aluminum sheet.

Up to 100 mm Dia

above 101 mm Dia and up to 200 mm dia

above 201 mm Dia and up to 300 mm dia

above 301 mm Dia and up to 600 mmdia

above 601 mm Dia and up to 1000 mmdia

Above 1001 mm dia

Provision of Locking arrangement for Metal Cladding

R/R of Metal cladding Removal and re-fixing of existing metal cladding on exhaust pipes of ME / DA pipes.

Up to 100 mm Dia

above 101 mm Dia and up to 200 mm dia

above 201 mm Dia and up to 300 mm dia

above 301 mm Dia and up to 600 mmdia

above 601 mm Dia and up to 1000 mmdia

Above 1001 mm dia

Cold lagging / fresh water lines / fire lines : Removal of existing cold lagging of A.C .Ducts covered with spintex / MFMB / Nitrile foam insulation along with canvas / FRP cloth covering and re-insulation (renewal) with spintex/MFMB/ NITRILE FOAM covering of with canvas cloth with or without FRP tape and application of two coats of distemper / POP.

100mm dia pipe and below

above 101mm dia and up to 200 mm dia pipe

A/C duct up to 200 x200 mm and below

A/C duct above 201 x201 mm and below 400x400 mm

A/C duct above 401 x401 mm and below 600x600 mm

A/C duct above 601x601 mm

Flanges and Valves

A/C evaporator tanks/expansion tanks etc

Chilled water lagging : Removal of existing chilled water cold lagging( including gas lines) Puf / Thermocole/nitrile foam insulation along with canvas / FRP cloth covering / aluminum tape and re-insulation (renewal) with nitrile foam covering canvas cloth /aluminum tape and application of two coats distemper / POP.

50mm dia pipe and below

above 51mm dia and up to 100 mm dia pipe

above 101mm dia and up to 200 mm dia pipe

above 201mm dia and up to 300 mm dia pipe

FLANGE MUFFS

Below 100 mm dia

Above 101 mm dia and up to 200 mm dia

Above 201 mm dia and up to 300 mm dia

VALVE MUFFS

Below 100 mm dia

Above 101 mm dia and up to 200 mm dia

Above 201 mm dia and up to 300 mm dia

Hot lagging on Fire / Fresh water / hot water lines: Removal of existing lagging with covering canvas / FRP cloth / asbestos rope on the existing lines and re insulation with lagging and covered with canvas / FRP and application of distemper / POP.

50mm dia pipe and below

above 50mm to 100mm dia pipe

above 100mm dia pipe

FCUs/ ATUs: Removal of existing MFMB / Phenotherma / Puff slabs and re- insulate with new MFMB/NITRILE FOAM material and all the joints are to be covered with FRP tape / Canvas cloth.

NOTE: a) All the tools, tackles required to carry out the job is contractor scope. The staging required for the above is under contractor’s scope. b) All the materials, consumables required to carry out the job shall be supplied by HSL / ship. c) Removal of insulation of 2nd and subsequent layers will be limited to 60% of the 1st layer removal. d) The length of the pipe shall be measured excluding the flanges for s.no.3 and 5. Additional amount will be paid for Muffs as per s.no.6 if contractor covered the flanges with muffs. e) If the flanges are also covered with MFMB / PUF / FENOTHERMA insulation material as done to pipes (cold lagging), the flanges OD will be considered as pipe OD. f) 70% of insulation renewal rate shall be considered for payment if new insulation to be provided without removal of old insulation. g) 70% of insulation renewal rate shall be considered for payment if Removal and re-fitment of existing insulation h) RC is valid for a period of 2 years from the date of the order.

Description of Work / Item(s)

Amount

(A) - Removal of existing/damaged flooring, clean the debris from the position and shift to jetty. Carry out the surface free from cement/underlay and other foreign materials.

(B) - Relay the flooring of required thickness and application of white cement to joints as necessary.

Syncholyte Flooring

Vinyl / Lenolium sheet

Machrotech/ oxydeck and other compound flooring

Cement Flooring

Upto 25mm thick

Above 25mm and upto 50mm thick with wire mesh

Above 51mm and upto 100mm thick with wire mesh

Skirting at WC / Bath / Galley

Gutter ways

Cermac / PVC Tiles

Tiles at commode area upto 1Sqmt

Concreting arround Indian Commode area

Damaged Cermac / PVC Tiles at staggered areas

Renewal of Heat Proof Flooring above Egine Room/ Galley by providing Puff Insulation on the deck by applying CPRX compound

NOTE: a) All the tools, tackles required to carry out the job is contractor scope. b) All the materials, consumables required to carry out the job shall be supplied by HSL / ship. c) Surface preparation: Mechanical cleaning / painting shall be paid as per existing Rate Contract in operation with societies. d) Removal of tiles at commode are shall be paid along with flooring in sqmtrs. e) Removal of cement flooring of gutter ways and skirting at WC/Bath/Galley shall be considered in sqmtrs. f) RC is valid for a period of 2 years from the date of the order.

Description of Work / Item(s)

Amount

WOODEN PANELLING WITH LININGS :

Removal of panelling (wooden / hylam sheets / B-Class panels) including linings (supporting structure wood frame work) as necessary and fit back with the old panels along with linings and all joints to be finished with Aluminum beading / wooden battens/ omega beadings.

Removal of panelling ( wooden / hylam sheets / B-Class panels) including linings (supporting structure metal frame work) as necessary and fit back with the old panels along with linings and all joints to be finished with Aluminum beading / wooden battens / omega beadings .

Renewal of panelling( wooden / hylam sheets/ B-Class panels) including linings (supporting structure of wood frame work with metal clamps by welding to the existing frames) with all openings as necessary including inspection covers and all joints to be finished with Aluminum / wooden beading / omega beading .

Renewal of panelling( wooden / hylam sheets/ B-Class panels) including linings (supporting structure of metal frame work with metal clamps by welding to the existing frames) with all openings as necessary including inspection covers and all joints to be finished with Aluminum / wooden beading / omega beading .

SHEET METAL PANELLING WITH LININGS :

Removal of black metal / Stainless steel / GI / Aluminum / perforated panelling including linings (supporting structure of wooden/ metal frame) as necessary and fit back the old panelling sheets with linings as required.

Renewal of black metal / GI / Aluminum / perforated panelling including linings (supporting structure of wood frame) as necessary and refit with new panelling sheets including linings (supporting structure of wood frame) with all opening as necessary including inspection covers

Renewal of black metal / GI / Aluminum / perforated panelling including linings (supporting structure of metal frame) as necessary and refit with new panelling sheets including linings (supporting structure of metal frame) with all opening as necessary including inspection covers

Renewal of Stainless steel panelling including linings (supporting structure of wood frame) as necessary and refit with new panelling sheets including linings (supporting structure of wood frame) with all opening as necessary including inspection covers.

Renewal of Stainless steel panelling including linings (supporting structure of metal frame) as necessary and refit with new panelling sheets including linings (supporting structure of metal frame) with all opening as necessary including inspection covers

ACCOUSTIC METAL PANELLING WITH LININGS :

Removal of exsiting insulation on all exhaust pipes of ME / DE and re insulation in two/three layers and covered with canvas / FRP cloth as required.

Removal of acoustic panelling (perforated sheet with insulation moulded block or metal sheet ) and fit back removed panelling including linings (supporting structure of metal frames welded to the existing frames)

Renewal of acoustic panelling (perforated sheet or metal sheet ) including linings (supporting structure of wood) and openings as necessary including inspection covers

Renewal of acoustic panelling (perforated sheet with insulation moulded block or metal sheet) including linings (supporting structure of metal) and openings as necessary including inspection covers

Renewal of floor beading ( Teak / metal beading/ omega beading) for bulkhead panelling

NOTE: 1. All the tools, tackles required to carry out the job is contractor scope. 2. All the materials, consumables required to carry out the job shall be supplied by HSL / ship. 3. Removal and refitment/renewal of Punka lovers are covered in the above scope. 4. 30% of removal and refitment rate shall be considered for payment in case of only removal of panelling with linings and handed over to HSL (No Fitment involved) 5. RC is valid for a period of 2 years from the date of the order

Description of Work / Item(s)

Amount

DECK SHEATHING

Removal and Refitment of deck sheathing to facilitate other associated jobs on deck by using the existing studs. After well tightening nuts on studs, all the counter sunk holes are to be plugged with wood dowels. All joining of wood blocks shall be cocked with marline rope and grooves to be filled with hot keel. Size of deck sheathing: upto 200mm wide x upto 100mm thick

Removal of damaged deck sheathing after removal of wood dowels from counter sunk of securing nuts on studs. Clean the surface properly and fix with new deck sheathing after making suitable counter sunk holes at the required positions. After well tightening of nuts on studs all the counter sunk holes are to be plugged with wooden dowels. All joining of wood blocks shall be cocked with marline rope and grooves to be filled with hot keel. Size of deck sheathing : upto 200mm wide x upto 100mm thick

Removal of damaged studs by gas cutting and ground smooth to the satisfaction of ship staff / HSL and re weld with new studs.

Removal of old cocking and providing new cocking to the existed deck sheathing of all grooves with marline rope and filled with hot keel

Description of Work / Item(s)

Amount

DOORS & PORT HOLES:

Removal & refitment of Teak wood / steel / aluminium / B-Class hinged doors along with hard ware.

Removal of old door and refitment of new Teak wood / steel / aluminum / B-Class hinged doors along with hard ware work includes welding of metal clamps to the bhd

Removal, repair & refitment of Teak wood / steel / aluminum / B-Class hinged/sliding doors along with frame and hard ware

Removal of damaged Teak wood / steel / aluminum / B-Class hinged doors along with hard ware and fitment of new door supplied by HSL.

Removal of damaged Teak wood hinged doors and manufacture door as per sample (material HSL supply) and fitment along with hard ware and aligned. (bath/ cabin doors).

Removal and refitment of Teak wood / steel / aluminum / B-Class sliding doors along with sliding frame and hard ware.

Removal, repair and refitment of Teak wood / steel / aluminum / B-Class sliding doors along with sliding frame and hard ware with nacessary welding of metal clamps.

Removal of Teak wood / steel / aluminum / B-Class sliding doors along with sliding frame and fitment with new sliding door and frame and hard ware (new sliding door and frame HSL supply).

Removal of Main Entrance door along with frame (for Passenger vessels only), and repair the door along with frame and fit back in position along with hardware.

Removal of Teak wood sliding doors along with sliding frame, manufacture sliding door and frame as per sample, fitment with sliding frame and new hard ware and proper alignment.

Removal of Main Entrance door along with frame (for Passenger vessels only), manufacture new door as per sample along with frame and fit in position along with hardware.

Alignment and R/R of Cabin doors ( B0 / B15/ C-Class,wooden)

Removal of bath room metal doors with frames and fit back the same after hot repairs to the doors and frames with welding and refitment of the same to the metal bulkhead with alignment.

Alignment of Fire doors job includes faring of existng bulkhead , renewal of bolts and nuts, welding of clamps and frames etc.

Renewal of fire Doors (steel) by cutting the old bolts and nuts and welding the frame to the M.S. bulkhead ( job includes faring of existing M.S. frame / plate, alignment, modification to the opening to suit the new door) door and door frame HSL supply . Type of doors: A0, A15, A30, A60, M.S. FIRE DOORS

Removal and refit of fire Doors (steel) job includes cutting of old bolts and nuts and welding the frame to the M.S. bhd.

Renewal of bottom S.S. door stips for fire doors.

Renewal of locks / handles for fire doors.

Renewal of bottom channel for fire doors.

Renewal of heavy duty fire door closures to the fire doors with tapping to the metal frames.

Repairs to fire door hinges.

Removal and refit of cabin Door Frames (wooden / steel).

Renewal of bottom ply wood sheet for bath room / cabin doors.

Renewal of bottom G.I / Metal sheet for fire doors.

Renewal of bottom G.I / Metal sheet for bath room / cabin doors.

Removal and refitment of Port hole boxes.

Remove fabricate and refit Port hole boxes- metal /wood.

Removal and renewal of accommodation doors wire mesh (S.S./Metal)(500mmX500mm)

Removal and Re-fitting of accommodation doors wire mesh (S.S./Metal)(500mmX500mm)

Note: a) All the tools, tackles required to carry out the job is contractor scope. b) All the materials, consumables required to carry out the job shall be supplied by HSL/ Ship. c) RC is valid for a period of 2 years from the date of the order.

Description of Work / Item(s)

Amount

(A) - Removal from the compartment on board the vessel and shift to work shop and refit back after completion of other repairs.

(B) - Removal from the comparment on board the vessel and shift to work shop and repair as necessary and fit back in position.

(C) - Removal from the compartment and manufacture new item as per sample and fit back in position .

Bunks with out drawers (wooden).

Bunks with drawers (wooden)

Bunks with out drawers (metal).

Bunks with drawers (metal).

Two tier Bunk along with accessories( metal).

Folding Bunks (metal).

Bunk Plywood

Bunk Matresses up to 1mtr x 2 mtrs

Stictching of Rexin cover for bunk matresses upto 2x1mtr

Patch work renewal of rexine/ cloth for matress with foam

Stictching of cloth cover for bunk matresses upto 2x1mtr

Chair cushion and covered with rexin / upholestry

Wooden Sofa with back rest completely covered with rexin / upholestry

patch work renewal of rexine/ cloth for sofa/chairs with foam

Wooden Sofa 3 seater (or) upto 2mtrs long with cupboards / sliding doors with hard ware

Pilot Chair completely covered with rexin / upholestry

Bar Counter of height as required

Wooden Table with drawer / cup board / computer key board of standard height as required.

Wooden Table without drawer / cup board / computer key board of standard height as required.

Wooden Book Racks / office almarah / Cup board with glass/wooden sliding doors or hinged doors.

Wooden Table with drawer / cup board / computer key board of standard height as required for electrical equipment like,GMDSS, RADAR, AMPLIFIER,RADIO,ETC.

Manufacturing of notice boards with benting cloth and with glass doors.

Manufacturing of notice boards with benting cloth and without glass doors.

Letter painting of duty state boards and other state boards on hylam/ sun mica board along with wooden beading.

Buffing of aluminum / S.S.sheets

Manufacturing of storage wooden boxes with ply wood and with all hardware

Wooden/Metal folding table

Buffing of metal racks

Renewal of gantry chocks for dredgers with wood at all heights

Renewal of boat chocks with wood and covered with coir and canvas cloth at all heights

Renewal of life raft stands with coir and canvas cloth and with rubber sheet

Renewal of ceremonial wooden dias

Manufacturing of flag stand

Removal and refitment of items like fridge stand, bottle racks, wall clock,water cooler,diffuser boxes,wooden stand etc

Renewal of gang way ( leads man plat form)

Removal and refifitment of aluminum bunks with bunk matresses and bunk drawers( work includes welding/cutting of existing claps and pipes).

Removal and refifitment of aluminum bunks with bunk matresses and bunk drawers after modification( work includes welding /cutting of existing claps and pipes)

Manufacturing of Life buoy crest and painted with ships amblum

Manufacturing of wooden man hole covers with all hardware

Wooden key board along with key holding hooks as per sample

Removal and re-fixing of metal lockers

Removal and re-fixing of metal/wooden ladders on bunks

Renewal of wooden hand rail on accommodation ladder, job includes fixing glass panels, butter fly nuts, grooves for fixing lights in the wood etc.

Removal, repair and re-fixing of wooden hand rail on accommodation ladder, job includes fixing glass panels, butter fly nuts, grooves for fixing lights in the wood etc.

Wooden top table

FRP fire hose boxes

Wooden drawers

Wooden doors for cupboard

Anti skid Rubber mat

NB: a) All the tools, tackles required to carry out the job is contractor scope. b) All the materials, consumables required to carry out the job shall be supplied by HSL. c) RC is valid for a period of 2 years from the date of the order

Description of Work / Item(s)

Amount

(A) - Quote for removal, surface preparation as required and removal of debris to jetty.

(B) - Refit with correct thickness of removed material and necessary proper ceiling and finishing on all joints as necessary for every layer as per the working practice.

Aluminum / SS sheet panelling including beadings.

MFMB / MFRB / Phenotherma insulation/puff insulation with FRP tape rolls.

1st Layer of insulation 50mm thick and below

2nd and subsequent layers of 50mm thick and below (per layer)

Removal of existing plywood and renew plywood on insulation. Scope of work includes renewal of wooden structure (linings) for fixing the panelling as required. The depth of wooden structure will up to 300 to 400 mm. all the wooden structure has to be secured with metal cleats by welding to the near by frames.

R/R of meat hooks

Repairs to cool and cooler room doors

Removal & Re-fixing of cool and cooler room doors

Repairs to cool and cooler room frames

Renewal of rubber beading on the cooler and freezer room doors

Renewal door locks on the cooler and freezer room doors

Manufacturing of cooler room door , work includes fixing of insulation to the door and covered with Al/S.S.sheet and with all hardware and fit back in position.

Renewal of cool and cooler room door frames

Renewal cool and cold room door hinges

Alignment of cool and cold room doors

Removal and relaying of vapour barrier on insulation prior to fitment of plywood.

Removal and refitment of wooden racks in cool and cold rooms

Renewal of wooden racks in cool and cold rooms.

Removal and refitment/ renewal of S.S./Metal racks.

NB: a) All the tools, tackles required to carry out the job is contractor scope. b) All the materials, consumables required to carry out the job shall be supplied by HSL / ship. c) RC is valid for a period of 2 years from the date of the order.

Description of Work / Item(s)

Amount

Removal of dock blocks (both shaped and un shaped) from underneath the vessel by chilling and hammering the docking wood. Size of the wooden blocks as indicate below:

1000x400 mm at heights between 3 mtr to 4 mtr from dock floor and refilling the same after steel / painting works for Tug and supply vessels.

Provision of additional concrete blocks at the marked area and place wedges and caping pieces and properly secured.

Provision of shores to the vessel and secure properly.

Removal of Concrete bolck by chilleling & breaking.

Laying of Concrete block (insitu) to arrest the leaks of ship's structure.

Removal and refitment or renewal of following items.

Door closer

Door closer for fire doors (heavy duty) with out tapping.

Removal and refitment of wooden gratings.

Renewal of wooden racks in stores.

Removal and refitment of wooden racks in stores.

Manufacturing of wooden gratings and fitment of the same.

Removal and repair of wooden gratings and fitment of the same.

Renewal of telephone booth( sound proof) with sound proof lagging and panelling and providing one hinged door with rubber beading with clear view glass on the door.

Removal and refixing of wooden fender for gantries in Dredgers job includes welding nuts and bolts to the gantry.

Renewal of wooden fender for gantries in Dredgers. Job includes welding nuts and bolts to the gantry.

Renewal of false bulk head wooden fender up to 150 to 250 mm thick in DCI Dredgers job includes welding of bolts and nuts in position and with wooden plugs ( the job has to be carried out at an heights of more than 3 mtr).

Removal of cabin doors along with frames.

Repairs to wooden chairs/ metal chairs.

Renewal of Door Lock for cabins.

Renewal of accommodation ladders

Removal and refitment of accommodation ladders (Wooden).

Removal and refitment of accommodation ladders (MS).

Renewal Door Lock (Godrej).

Renewal/ removal and refitment of eye hooks.

Renewal of accommodation hand rails.

Removal and refitment of accommodation hand rails.

Renewal/ removal and refitment of Aldrops.

a) Renewal of Door handles for cabin doors

Manufacturing of wooden base for Western commodes

Renewal of Tower bolts

Renewal of hasp and staples / door latch.

Renewal of Hinge/ Pin type hinges for cup board doors.

Renewal of Piano hinge

Renewal of Bath room mirrors

Renewal of Coat hook / hanger

Renewal of curtain rails

Renewal of Towel rods

Renewal of Bath room rubber mats (secured)

Renewal of Ball catches

Renewal of Multipurpose locks for drawers and cup boards

Application of white cement on the joints of old ceramic tiles

Renewal of Punka Lowers

RENEWAL / REMOVAL & REFIT OF FENDERS

Tubular fender with D-Shackles and GI Chain / wire slings.

2-Legged Tire fender including welding and chain fixing

3-Legged Tire fender including welding and chain fixing

Wooden fender upto 150 x 150 mm size along with associated fittings.

Wooden fender above 150 x 150 mm size along with associated fittings.

Rubber fender upto 150 x 150 mm size along with associated fittings.

Rubber fender above 150 x 150 mm size along with associated fittings.

Square / Rectangular / W-Type Rubber fender with M.S. Tie Rod including welding (for tugs).

Removal of damaged curtain rods and provided with new curtain rods for passenger bunks.

Removal re-fixing of curtain rods for passenger bunks.

Removal / renewal (supplied by HSL) of wooden / FRP gratings from passenger bath rooms to facilitate other associated jobs and refitment after completion of other works.

FRP /GRP COATINGS BHDS & DECKS

Renewal of FRP / GRP coating upto 3mm thick of 100 to 300mm width in single layer. The scope of work includes the surface preparation to suit with the work (material HSL supply)

Renewal of FRP / GRP coating upto 3mm thick of 100 to 300mm width in single layer. The scope of work includes the surface preparation to suit with the work (material contractor's scope)

Renewal of FRP / GRP coating upto 6mm thick up to 100 mm to 300mm width in two layers. The scope of work includes the surface preparation to suit with the work (material HSL supply)

Renewal of FRP / GRP coating upto 6mm thick up to 100 mm to 300mm width in two layers. The scope of work includes the surface preparation to suit with the work (material contractor's scope)

Application of FRP / GRP coating with FRP putty upto 6mm thick. The scope of work includes removal and the preparation of surface to suit with the work (material contractor's scope)

Application of FRP / GRP coating with FRP putty upto 6mm thick on Eddy Cones on the weld joints. The scope of work includes removal and the preparation of surface to suit with the work (material contractor's scope)

Application of FRP / GRP coating with FRP putty upto 6mm thick on Eddy Plates on the weld joints. The scope of work includes removal and the preparation of surface to suit with the work (material contractor's scope)

Application of FRP / GRP coating with FRP putty upto 6mm thick on Rope Guards on the weld joints. The scope of work includes removal and the preparation of surface to suit with the work (material contractor's scope)

Application of GEL coating on the FRP finished surface. The scope of work includes removal and the preparation of surface to suit with the work (material contractor's scope)

Application of FRP / GRP coating with FRP putty upto 6mm thick on Propeller Shafts. The scope of work includes removal and the preparation of surface to suit with the work (material contractor's scope)

Removal of damaged wooden gratings from passenger bath rooms and manufacture new wooden gratings of suitable size and fit back in position

Renewal of rubber fender for Naval SMB boats including fitment of nuts and bolts by drilling.

Removal and refixing of rubber fender for Naval SMB boats including fitment of nuts and bolts.

Manufacture and fitment of FRP/GRP stips of 25 to50 mm width and up to 10 mm thick for Naval SMB boats

Removal of FRP by chiselling/ scraping.

Removal of Tar felt by chiselling / scrapping

Removal of Tar felt by chiselling / scrapping , surface preparation and relaid with new Tar felt.

Manufaturing of Wooden chokes (shaped) for boats (upto 1mtr will be considered as 1mtr)

Renewal of rubber beading for the doors as required (cabin)

Renewal of rubber beading for the doors as required (cool & cold room)

Repair and R/R of bath room doors with frames along with accessories(wooden)

Repair and R/R of bath room door with frames along with accessories (steel / GI)

Renewal of PVC Bath room doors along with accessories (new doors HSL supply)

Removal, manufacture and Renewal of wooden ladder (double bunk)

Stitching of curtains for bunk/door including fitment in position

Manufaturing of Gang way Aprons with Letter painting

Repairs of Life buoy with Letter painting by stitching of new canvas cloth. Nylon rope. HSL Note: Nylon rope procurement is in contractor scope

Removal / refitment of Awning sheets along with aluminum flat and hard ware

Renewal of Awning sheets along with almuminum flat and hard ware

Renewal of 'J' bolts with cup washers for fixing of awning sheets

Renewal of wooden chocks under awning sheets

Renewal of only Aluminum flat of awning sheets

Renewal of bottom floor SS strips for Cabin doors / Fire doors

Application of FRP Gel coat for Life boats

Laying and removal of Polyethene sheet for cabins

Providing of Aluminum nose beading for steps

Removal and refitment of Catwalk (wooden)

upto 100 mm wide

above 100 mm wide

Renewal of Catwalk (wooden)

upto 100 mm wide

above 100 mm wide

Engraved Name Tallies of hylam /brass fitment at respective places

upto 50mm wide

above 50mm and below 100mm wide

above 100mm and below 200mm wide

Fitment of Fire hose boxes

MANUFACTURE OF WOODEN PLUGS

upto 100mm dia x upto 200mm long

above 100mm dia x upto 300mm long

above 200mm dia above 500mm dia

Fitment of Soap dishes

Manufacture of Mirror along with wooden framing and fittment in position.

Buffing and finishing

SS Sheets

Aluminum Sheets

Renewal of Plastic Shower curtains with curtain pipes

Renewal of Wall Paper

Manufacture of Wooden Packing Boxes for transportation of items

Manufacture of Wooden Packing Boxes for loose items with hinder cover

Fitment of Towel hanger

Providing of Shelves only for existing cup boards

Fitment of Louvers for cabin doors

Fitment of Door stoppers

Stiching of Canvas cloth with eye lets

Providing of SS sheet on table tops

Providing of Sumica (removal also included if required) on table tops

Renewal of Table Top for Wooden Tables.

Manufacturing of Telephone Stand/ Fan Stand

Renewal of chain locker wood by welding of studs/ clamps of required size

Removal and refixing of chain locker wood by welding of studs/ clamps by welding

Polishing of wooden furniture

NB: a) The scope of work includes removal of scrap from the position and fitment of items in position. b) Collection of all the materials to provide additional blocks with wedges and capping pieces is covered in contractor scope. c) It is the responsibility of contractor to carry out the job without damaging to hull and existing fittings. d) RC is valid for a period of 2 years from the date of the order

Description of Work / Item(s)

Amount

Marking of layout, placment and water leveling of dock block(concrete/ steel blocks) to a base line height of 1.6mtr from dock floor as per docking plan. Job includes removal of old blocks from dock floor.

Size of Block: (a) 1500mm X 400mm

(b) 1500mm X 1000mm

(c ) 1500mm X 1500mm

(d) 1500mm X 750mm

(e ) 1500mm x 3000mm

Wooden levelling on the dock blocks to a base line height of 1400mm to 1600mm from dock floor

Size of Block: (a) 1500mm X 400mm

(b) 1500mm X 1000mm

(c ) 1500mm X 1500mm

(d) 1500mm X 750mm

(e ) 1500mm x 3000mm

Wooden levelling on the dock blocks to a base line height of 2500mm to 3300 mm from dock floor

Size of Block: (a) 1500mm X 400mm

(b) 1500mm X 1000mm

(c ) 1500mm X 1500mm

(d) 1500mm X 750mm

(e ) 1500mm x 3000mm

Making of wooden shapes as per docking plan

Placement of shapes on levelled bilge blocks and secured properly with dog clamps, G.I.wire and welding of flat bars etc.,

Size of Block: (a) 1500mm X 400mm

(b) 1500mm X 1000mm

(c ) 1500mm X 1500mm

(d) 1500mm X 750mm

(e ) 1500mm x 3000mm

Verticial shores to be provided post docking of vessel. If required

(a) 200mm X200mm . Height between 1.5 mtr to 5mtrs

(b) 200mm X200mm. Height between above 5mtr to 10mtr

Note:- 1) All tools and tackles required for above job shall be contractor's scope. 2) Contractors shoud work atleast two shifts, if required firm has to plan to work round the clock 3) Relevant experience to be submitted along with technical bid. 4) Dock block inspection to be shown to H.S.L/Owners/ Surveyor/ND(v).Necessary modifications recommended by inspection team are to be rectified by contracor. 5) Post docking of ship gaps between dock block and ship to be filled by contractor with in 24 hrs of docking. 6)Installation of staging shall be under contractor's scope.Required staging material will be issued and the same to be collected and deposited back to and from Rigging dept. 7) Welding of flat bars for securing of dock blocks shall be contractor's scope. 8) RC is valid for a period of 2 years from the date of the order

ST JOSEPH FIBER AND GENERAL ENGINEERING WORKS

RAVI KARRI ENTERPRISES

PSV Enterprises

SRI SATYA INDUSTRIES

SAPTAGIRI INDUSTRIES

VARAHA INTERIOR WORKS

akshita industries

SIRICON ENGINEERS AND CONTRACTORS

SANKAR CONSTRUCTION

SAPTAGIRI INDUSTRIES

VARAHA INTERIOR WORKS

akshita industries

SHASI ENTERPRISES

SANKAR CONSTRUCTION

ST JOSEPH FIBER AND GENERAL ENGINEERING WORKS

PSV Enterprises

RAVI KARRI ENTERPRISES

SIRICON ENGINEERS AND CONTRACTORS

ST JOSEPH FIBER AND GENERAL ENGINEERING WORKS

RAVI KARRI ENTERPRISES

SRI SATYA INDUSTRIES

akshita industries

SAPTAGIRI INDUSTRIES

VARAHA INTERIOR WORKS

PSV Enterprises

SANKAR CONSTRUCTION

SIRICON ENGINEERS AND CONTRACTORS

ST JOSEPH FIBER AND GENERAL ENGINEERING WORKS

SRI SATYA INDUSTRIES

SAPTAGIRI INDUSTRIES

VARAHA INTERIOR WORKS

RAVI KARRI ENTERPRISES

akshita industries

SANKAR CONSTRUCTION

SIRICON ENGINEERS AND CONTRACTORS

PSV Enterprises

RAVI KARRI ENTERPRISES

akshita industries

SRI SATYA INDUSTRIES

SAPTAGIRI INDUSTRIES

VARAHA INTERIOR WORKS

PSV Enterprises

SHASI ENTERPRISES

SANKAR CONSTRUCTION

SIRICON ENGINEERS AND CONTRACTORS

RAVI KARRI ENTERPRISES

PSV Enterprises

akshita industries

SRI SATYA INDUSTRIES

SAPTAGIRI INDUSTRIES

VARAHA INTERIOR WORKS

SHASI ENTERPRISES

SANKAR CONSTRUCTION

SIRICON ENGINEERS AND CONTRACTORS

SAPTAGIRI INDUSTRIES

akshita industries

VARAHA INTERIOR WORKS

SANKAR CONSTRUCTION

PSV Enterprises

ST JOSEPH FIBER AND GENERAL ENGINEERING WORKS

RAVI KARRI ENTERPRISES

SIRICON ENGINEERS AND CONTRACTORS

SHASI ENTERPRISES

RAVI KARRI ENTERPRISES

SRI SATYA INDUSTRIES

SAPTAGIRI INDUSTRIES

VARAHA INTERIOR WORKS

PSV Enterprises

SANKAR CONSTRUCTION

akshita industries

SIRICON ENGINEERS AND CONTRACTORS

SHASI ENTERPRISES

akshita industries

SHASI ENTERPRISES

SIRICON ENGINEERS AND CONTRACTORS

SRI SATYA INDUSTRIES

SAPTAGIRI INDUSTRIES

VARAHA INTERIOR WORKS

ST JOSEPH FIBER AND GENERAL ENGINEERING WORKS

RAVI KARRI ENTERPRISES

SANKAR CONSTRUCTION