Providing internal partitions and other works at 3rd Floor in Unfinished main office New Building of C+G+9 Floors in Vijayawada Municipal Corporation office premises (VMC General funds).

Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete.

Reinforced Brick Masonary walls of 11 cm in CM(1:6) using country bricks and using two mild steel bars of 6m dia in every third layer of brick masory, with free joints of the main block work including cost and seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. complete but excluding the cost of steel and its fabrication charges for finished item of work as per SS 509

Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete

Plastering for Celing in CM (1:3) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete.

Flooring with Galaxy Granite 18-20 mm thick upto 2.43M (Premium Quality) other than black set our base coat of CM(1:8) 20mm thick over CC bed already laid or RCC roof slab including neat cement slurry honey light constituency spread at 3.30Kgs per Sq. and jointed neatly with white cement paste mixed with pigment of matched shade to full depth, including cost of all materials like cement sand water and tiles etc. complete including labour charges for dressing of tiles etc., complete for finished item of work.

Flooring with 1st quality vitrified tiles of size 900 x 900mm, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., all labour charges, sundries, hire charges of all T & P etc., complete for finished item of work. (900x900 of 10 to12mm thick)

Providing skirting to internal walls & risers of steps to a height of 15cm with vitrified tiles using 900mm long tiles i.e., length equal to flooring stones, set over base coat of CM (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., all labour charges, sundries, hire charges of all T & P etc., complete for finished item of work. (900x900 of 10 to12mm thick)

Flooring with ceramic tiles of scratch free-stain free nano finish of size 600 mm x 600 mm and with 8 to 10mm thickness, set over base coat of cement mortar (1:8) 7.3 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., all labour charges, sundries, hire charges of all T & P etc., complete for finished item of work.

Walling/Dadooing with glazed red or white full body ceramic wall tiles of 300 x 600mm and thickness 6mm any type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and thickness between 6-8mm of 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., all labour charges, sundries, hire charges of all T & P etc., complete for finished item of work.

Supplying and fixing Gyp board suspended regular single layer false ceiling (GS-MFSC-4.1 as per india Gypsum) using 12.50mm thick Gyp Board conforming to IS 2095-1982 fixing to Gyp steel GI perimeter channels of size 20mm x 27mm x 30mm (web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work / partion at 610mm c/c and suspending the frame work using intermediate channels (45mm x 15mm x 15mm x 0.90mm) form soffit at 1220mm c/c with ceiling angle (25mm x 10mm x 0.55mm) fixed with GI cleat and steel expansion fasteners & connecting clip to the cieling channels (withknurled web of 51.50mm x 26mm x 10.50mm x 0.55mm ) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.50 mm tapered edge Gypboard with 25 mm drywall screws at 230mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of dry wall topcoat complete for finished item of work as per India Gypsum Ltd., specification.

Supply and fixing of PVC false ceiling on MS/GI made skeleton framework.The frame shall be 24 x 48mm MS tube section fixed along with the wall. The entire frame work shall be concealed with PVC section having overall dimensions of 6 x 250mm with a wall thickness of 1mm ± 0.3mm with tongue and groove system, provided with necessary arrangements for electrical connections etc. including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls

Painting priming coat on new plastered surface using best quality cement primer to give an even shade after thoroughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per S.S. Third Floor

Painting two coats with best quality Plastic emulsion paint of Grade-I variety of approved colour and make over internal walls to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per S.S and as directed by the departmental authorities. Third Floor

Supplying and fixing of stainless steel ( grade 304 ) hand railing as per approved drawing with top rail of 50mm dia Nominal bore pipe of 2.9mm thick medium class and horizontals of 25mm dia Nominal bore of 2.3mm thick medium class 3Nos & verticals of 50mm dia Nominal bore pipe of 2.9mm thick at a spacing of 750 to 900mm fixed with base plate using bonding agent and anchor fastner and welding, drilling of 18mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thoroughly , lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit, for all leads and lifts etc., complete finished item of work.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 45 x 75mm. The two Vertical members are to be joined together with the horizontal member using 8 x 50mm long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. Theready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. Aminimum of 4No.soft screws to be provided for each vertical member & minimum 2no.s for horizontal member with encapsulation of 8MM rigid layer onall the six surfaces. The door frame will have a rebate of 32MM.

Providing and fixing of 28-30mm thick Solid Wood Polymer Composite(WPC) single extruded door shutter with 3MMtop and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges shall be used for fixing the door with the frame

Providing and fixing of fixed partions using 12mm clear toughened glass with Aluminium Male and female sections including all necessary fixtures and labour charges etc complete as directed by the Engineer-in-charge (Quotation)

Supply & fixing of Frosted film lines on glass partion including all necessary material and labour charges etc complete as directed by the Engineer-in-charge (Quotation)

Providing and fixing of single shutter glass door using 12mm clear toughened glass with required aluminium sections , Floor spring, Top& bottom latch , Lock,Over & side pannel connecting latch with pivot & required connectors, handles etc complete including all necessary fixtures and labour charges etc complete as directed by the Engineer-in-charge.

Supply and fixing of ceiling wood support for anchoring to the ceiling with required accessories including all necessary fixtures and labour charges etc., complete as directed by the Engineer-in-charge

Providing M15 Grade Nominal Mix Plain Cement Concrete using 275 Kgs. of Cement, 20mm & 10mm nominal size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days etc., complete as per drawings and technical specifications of MORTH.

Supply and delivery of Unplasticised Non-pressure polyvinyl chloride (PVC-U) pipes & specials of dark (any shade of brown) for use in underground drainage & sewerage system conforming to IS (15328/2003) with solvent cement jointing as per specification inclusive of transportation to work spot. Make: Johnson, Sentini, ASTRAL, Champion, Suki, Sudhakar, Somany or any equivalent brand that meets the applicable IS / BIS specifications is equally eligible for use with the approval of the competent authority, with no preference shown to any company.

160 MM dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm

110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm

75 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm

110 mm dia - Vent Cowl - UPVC/SWR Pipe fittings

110 mm dia - Single Tee - UPVC/SWR Pipe fittings

110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings

110 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe fittings

110 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings

110 mm dia - Cleaning Pipe - UPVC/SWR Pipe fittings

110 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings

110 mm dia - single 'Y' with out Door - UPVC/SWR Pipe fittings

110 mm dia - single 'Y' with Door - UPVC/SWR Pipe fittings

110 x 75 mm dia - Reducer - UPVC/SWR Pipe fittings

4" (101.6 mm ) multi floor trap with out Jali- UPVC/SWR Pipe fittings

4" (101.6 mm ) Nahany Trap with round jali UPVC/SWR Pipe fittings BMWG.114&BMWG.121

3" (76.2 mm ) Nahany Trap ( without Jali without inlet) UPVC/SWR Pipe fittings

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/bends/tees etc. of any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees etc. with solvent cement jointing as per standard practice including all sundries etc., complete as per S.S

Supply of approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, Rimless single piece WC with UF Soft close seat cover, hinges and fixing accessories and accessories set size:360x675x750mm of approvedmake with rubber buffer & PVC interconnection pipe wall flanges all of approved make etc., complete for finished item of work in all respects as per S.S and as directed by the departmental authorities of White Colour - Jaquar make

Supply and fixing of bib cock cum health faucet with 1.0 mt. long flexible tube and wall hook of Jaquar make queen series with 7 years warranty Chrome plated.

Labour charges for fixing of European Water Closet with 'P' or 'S' trap as per standard practice and as directed by the departmental authorities.

Labour charges for fixing Plastic seat and lid for European water closet

Supplying & Fixing of wall hung integrated basin with fixing accessories of Jaquar make of size: 530 x 460 x 400mm company price

Supply of Pillar cock of Jaquar make opal prime series of standard size

Supply and fixing of Chrome plated allied range Waste coupling of 32mm size full thread with 80mm height of Jaquar make with 7 years warranty

Supply and Fixing of 38.1 mm dia. PVC solid waste pipe outlet

Supply of Nylon connection of approved variety.

Labour charges only for fixing of sinks with waste fittings, rubber plug, chain, cantilever brackets including all sundries etc., complete as per S.S and as directed by the departmental authorities.

Supply of Urinal (Back inlet) of size 635 x 325 x 385mm with necessary fixing accessories of Jaquar make

Labour charges for fixing Flat back Bowl/ Half stall urinals fixing with C.P. Spreader and screws including all sundries etc., complete as per S.S and as directed by the departmental authorities

Supply and fixing of Auto closing concealed Urinal Flush Valve with required fixtures of approved make etc., complete as directed by the departmental authorities.

Supply and fixing of 580mm x 440mm x 260mm size Orissa Pan white glazed W.C 1st quality of ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap including cost of materials and labour charges etc., complete as per S.S and as directed by the departmental authorities.

Supply and fixing of Angle Stop Cock of 12.7mm dia. Of 1st quality Indian Make heavy duty including cost of materials and labour charges etc., complete as per S.S and as directed by the departmental authorities

Supply and fixing of angle valve chrome with triangular handle and wall flange of jaguar make astra range including cost of materials and labour charges etc., complete as per S.S and as directed by the departmental authorities.

Supply and fixing of premium make CPVC pipes and fitings to meet the requirements of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS15778:2007) Make:Johnson, Sentini, ASTRAL, Suki, Sudhakar, Prayag, Somany or any equivalent brand that meets the applicable IS / BIS specifications is equally eligible for use with the approval of the competent authority, with no preference shown to any company.

41.30mm ODPipe - SDR 13.5 BMW-I.224

34.90mm ODPipe - SDR 13.5 BMW-I.223

28.60mm ODPipe - SDR 13.5 BMW-I.222

22.20mm ODPipe - SDR 13.5 BMW-I.221

15.90mmODPipe -SDR 13.5 BMW-I.220

Supply and fixing of Indian make heavy type 40mm NB size CPVC Ball valve with S.S Ball and SS Spindle as per IS - Class - I including cost of materials and labour charges etc., complete as per S.S and as directed by the departmental authorities

Supply and delivery of CPVC specials including cost and conveyance of all materials etc. of approved make as directed by the departmental authorities. Any equivalent brand that meets the applicable IS / BIS specifications is equally eligible for use with the approval of the compentent authority, with no preference shown to any company.

25 mm brass elbows

20 mm brass Tee

25x20 reducer elbow

40 mmx32mm bush

40 x32 reducers

32mm dia Plain elbow

25mm dia Plain elbow

15mm plain elbow

20x15mm brass T

1000 ml - Heavy duty CPVC orange Solvent Cement

CPVC clamps-40mm dia

CPVC clamps-25m dia

CPVC clamps-20m dia

Providing and fixing toilet cubical systems with 12mm thick solid Compact Laminate panels made of Phenolic resins under high pressure and temperature having high density including doors, pilasters & intermediate panels, which should be resistant to heat, bacteria, chemical, scratch and impact & water immersion through permissible increase on weight should be <0.60~0.8%. Finished product should be as per approved texture, shade & drawing, detailing and developed according to IS-2046 and EN438 standards.All pilasters are to be supported by adjustable foot and non corrosive inserts. Top rail and wall fixing with and exterior polyamide coating guarantees resistance to breakage, heat, humidity and chemicals. The base of the adjustable foot will be anchored to the floor with a clearance height of 150mm. Aluminum U- Channel will be used for the fixing of intermediate panels to the wall.The toilet cubicle setup shall include necessary hardware fittings, as per manufacturer’s specifications and approved by Engineer.

Supply and fixing of Urinal Partitions of approved size and variety as per the requirement and as directed by the departmental authorities