PROVN OF WATER SAVING TAPS IN MD ACCN AND ADDN/ALTN IN TOILET BATHROOM (INCLUDING E/M WORKS) OF BLDG NO P-1427 AT AF STN BHUJ

Amount

Supply & fix bib cock long nose with wall flange and aerator, cat part No F2002152 complete all as specified and directed by Engineer-in-Charge.

Supply & fix pillar tap with aerator cat part No F2002101 complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Material & labour for Precast cement concrete block masonary with solid blocks exc 10cm in width Type C1 (1:5:8) (using 20mm graded stone aggregates) and setting in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material & labour for providing precast cement concrete solid building blocks or slabs 10cm thick type C1 1:3:6 (using 20mm graded stone aggregates) (with plain or interlocking joints as directed) setting in mortar, complete, in walls complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC door PDS-01 comprising of shutter and frame all as shown on drg No.CEAA/TD/149 sheet No. 1/1 (PVC RIGID FOAM) , door frame/ chowkats of solid rigid foam profile FP-6030 and shutter of solid PVC foam profile FP 7114 with 4 mm thick high pressure compact laminate as infill (Panel) including necessary hardeware fittings complete all as specified and directed by Engineer-in-Charge.

Supply & fix anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer-in-Charge.

Supply & fix rubber beading for fixing of glass of item No 8.00 above complete all as specified and directed by Engineer-in-Charge.

Supply & fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm complete all as specified and directed by Engineer-in-Charge

Supply & fix 100mm size of hinges butt hinges, medium weight, mild steel and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for 10mm thick rendering on vertical surface in cement mortar 1:4 as backing coat complete all as specified and directed by Engineer-in-Charge.

Material & labour for glazed digital ceramic coloured tiles Ist quality in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and icluding plaster in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land complete all as specified and directed by Engineer-in-Charge.

Material & labour for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate in sub base of floors etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for non skid ceramic coloured tiles 7 to 8mm thick (sqaure/rectangular) area of each tiles exc. 0.06 Sqm but n.exc. 0.11 Sqm as per IS - 13755 in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Supply & fix CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes: (SDR-13.5 ) complete all as specified and directed by Engineer-in-Charge.

20mm bore

25mm bore

Supply & fix PVC connection 15mm bore with PTMT nuts of length 600mm complete all as specified and directed by Engineer-in-Charge

Supply & fix UPVC ultra drain, self it pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors complete all as specified and directed by Engineer-in-Charge of following size :-

110 mm bore

75 mm bore

Supply & fix UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge of following sizes :-

110 mm bore

75 mm bore

Supply & fix PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge of following size : -

75 mm bore

110 mm bore

Supply & fix PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge of following sizes :-

75 mm bore

110 mm bore

Supply & fix PVC (SWR) floor trap, plain with grating including jointing with solvent cement with 75mm bore complete all as specified and directed by Engineer-in-Charge

Supply & fix towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 170 gms ) complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC corners fixed in bath rooms with screws including necessary drilling holes complete all as specified and directed by Engineer-in-Charge.

Supply & fix vitrious china semi-pedestal pattern (anglo-india type) white 'P'or 'S' trap with PVC water closet seat, black or white, closed pattern, with flat bottom and cover and mild steel chromium plate or aluminised hinging device including taking down and removal of existing old water closet with seat cover complete all as specified and directed by Engineer-in-Charge.

Supply & fix jet spray to EWC with PVC nozzle, PVC fish plates and PVC fish plates and PVC flexible pipe etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore complete all as specified and directed by Engineer-in-Charge.

Supply & fix stop valve 15 mm bore cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix brass CP mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix swivel shower of PTMTany colour for fixing with 15 mm bore (minimum weight 40 gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix vitreous china wash basin, angle back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed by Engineer-in-Charge.

Supply & fix pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix waste pipe of 32mm bore PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, bll valve, flaot and handle including brackets of 10 Ltr capacity.including flush pipe complete all as specified and directed by Engineer-in-Charge.

Material & labour for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering on concrete surfaces 15mm thick in two layers first coat 10mm thick in CM 1:6 and second coat 5mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and fair complete all as specified and directed by Engineer-in-Charge.

Supply only water proofing compound (ISI marked) complete all as specified and directed by Engineer-in-Charge.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed by Engineer in Charge.

Material & labour for preparing new/old plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Supply & fix preparation of old treated surfaces of wall including brooming down, scrapping down smoke soots etc. and appying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

Supply & fix preparation of new treated surfaces of wall including brooming down, scrapping down smoke soots etc. and appying three coat of white wash complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC conduit accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with and pressed steel terminal box powder coated of suitable size 3 mm thick backlite white/colour sheet top cover ISI marked with brass screws and cup washers for housing switches, socket, fan regulator etc complete all as specified and directed by Engineer-in-Charge for :-

One light point controlled by one, one way switch single pole piano type.

One exhaust point controlled by one, one way switch single pole piano type.

One 3 pin 5 Amp socket outlet on the same board.

Supply & fix switch piano flush type 230/250 Volt, 5 Amps single pole one way, complete all as specified and as directed by Engineer-in-Charge.

Supply & fix switch socket combination multi purpose 2 in 1, 5 pin 5 Amps, flush type, ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix ceiling rose surface bakelite 65mm x 50mm three terminal complete all as specified and directed by Engineer-in-Charge.

Supply & fix double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 240 volts powder coated complete all as specified and directed by Engineer-in-Charge.

Supply & fix isolators/MCBs of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) complete all as specified and directed by Engineer-in-Charge.

MCB SPN of 240 volts 40 Amps Capacity, 'C' series, 10 KA

MCB SP of 240 volts 6-40 Amps Capacity, 'C' series, 10 KA

Supply and fix wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 18 W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fix wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge.

Supply & fix metal body exhaust fan AC single phase 230/240V of size 300 mm sweep with louvers including making hole of suitable size/ alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge. ( Note: Old unserviceable Exhaust Fan will be deposited in MES AGE E/M store yard).

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 2.5 Sqmm single core, copper conductor drawn through and including PVC conduit ISI marked with accessories and 2.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and as directed by Engineer-in-Charge. (Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit) .

JYOTI TRADERS

zotabrothers

M/s Bombay Novelty Stores

SHREE BHANU ENTERPRISE