Construction of ACR's Building of ZPH School at Urdu Vuyyuru (V&M) in Krishna District (Udice Code 28162800406)

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work. [Ordinary Soil - Manual means - Upto 3m depth]

Augering bore holes between 350 mm to 450 mm dia and to all depths for cast-in-situ piles in loamy & clayey soils with out under reammers as per IS 2911-1980 and as per approved design and drawings including hire and all operational charges of machinery & Auger sets and all incidental & labour charges etc. complete for finished item of work for Piles

Reamming of under reammers to the existing bore holes of between 350 mm to 450 mm dia and to all depths for cast-in-situ piles in loamy & clayey soils as per IS 2911-1980 and as per approved designs and drawings including hire and all operational charges of machinery, auger & reammer sets and all incidental & labour charges etc. complete for finished item of work.

Plain Cement Concrete (1:4:8) using 40mm nominal size SS5 hard broken granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.[FOOTINGS]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.[BED BLOCKS, BANDS, PILE CAPS]

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering,shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Plinth Beam.

Vibrated reinforced Cement Concrete M 20 Nominal Mix using 20mmsize graded metal(SS 5) HBG M/C metal(Course aggretate)from approved quarry,using a minimum quantity of 350Kgs of cement per 1 cum of concrete incuding cost and conveyance of all materials like cement,fine aggregate(Sand),Course aggregate,water etc to site including centering using casewrina ballies and Wooden runners&staging including all bracings,cross members etc shuttering,machine mixing,laying of concrete,vibrating,lift charges etc complete but execluding cost of steel and its fabrication charges for finished item of work For columns

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.[CHAJJAS - SUNSHADES]

Vibrated Reinforced Cement Concrete M 20 Nominal Mix ( by Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 Kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Unsupported height up to 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Steel Centering Plates etc., , shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work For Beams (APSS No. 402 & 403)

Vibrated Reinforced Cement Concrete M 20 Nominal Mix ( by Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 Kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Unsupported height up to 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Steel Centering Plates etc., , shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work For RCC slab of 175 mm thick. (APSS No. 402 & 403)

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining,curing, rounding off junctions of wall and slab etc., complete for finished item of work.

Brick masonry in CM (1:6) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Basement.

Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.

Ornamental Ceiling plastering with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.

Plastering with CM (1:5) Single Coat, 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls.

Supplying, fitting and placing HYSD bar reinforcement complete as per drawings and technical specifications for bars below 36mm dia. including overlaps and wastage where they are not welded.

Supplying, fitting and placing MS grilled door, windows, gate including fabrication charges and all incidental charges etc, cost and conveyance of all materials and all labour charges etc., complete. (make of materials - TATA, Jindal, Sail, Visakha)

Supply and Fixing of ceramic steel Green Chalk Board of Size 2400mm x 1200 mm with vitreous enuamel steel sheet made of 0.3mm to 0.40mm thick steel sheet with ceramic steel engraving on surface (havinf vitreous enameled coating both side), 0.095mm thick top surface coating and block surface coating thickness of 0.03mm supported with 9mm thick MDF Board make: (Greenlam / Merino / Action Tesa) back support and backing with 0.25mm thick galvanized steel sheet make : (TATA / JSW / Sail/ Vizge steel ) Fixed with anodized aluminium frame 20mm wide and 1.2mm thcik and board shall be give additonal support four sidea bottom with Alluminium J-Camps (8 Nos) including cost & conveyance of all materials and labour charges like loading, unloading,including GST and all Taxes etc., as applicable form time to time and fixing of Green Board etc., complete for finished item of work. the item shall carry a Warranty period of 7 (Seven) yeras from tthe date of Supply.

Painting to New walls with two coats of acrylic emulsion paint exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of superior quality of approved brand and shade over base coat of primer grade -II making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges etc., complete for finished item of work. EXTERNAL WALSS

Painting to New walls with two coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges etc., complete for finished item of work. INTERNAL WALSS

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades Grade - I over Existing base of Red Oxide Primer in all including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors

Supply and fixing of Two shutter Sliding Windows made of Galvanized Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure polyester powder upto 50-60 microns thick with total coated thickness of 0.80 mm for Outer Frame and 0.80 mm thickness for Sliding Shutter Section, the Outer Frame for Two Tracks with Grill provision, outer Frame section of size of 90 mm x 50 mm and two Window Shutters of Powder Coated extruded Aluminium Alloy Section of 60mmX33.6 mm ( Thickness 1.50 mm ) , shutter frame profile of extruded Aluminium Alloy Section shall have minimum weight of 0.918 kg per running Meter and confirm IS 1948 and the window outer Frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 6 mm thick plain polycarbonate sheet of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminium 1 No. per each shutter and cut to length miter joined with corner brackets including installation of window system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work, Window with Two Powder coated sliding Window Shutters of Powder Coated Extruded Aluminium Alloy Section and with Grill, window outer Frame Size 90 mm x 50 mm have a rebate of 15mm x 5 mm to fit grill made of 10mm MS Sq Rods for horizontal bars welded at a regular pitch of 150mm to all-round frame of 12mm x 6 mm MS flat.

Cost & Supply of 22/0.3mm (1.5sqmm) FRLS/FRLSH/ZHFR PVC insulated 1100Vgrade as per IS 694/1990 specifications for copper cable to the Government school sites, including all labour charges like Loading & unloading and stacking charges, inclusive of GST and all other Taxes etc., as applicable from time to time, and all other incidental charges etc., complete and confirming to the specifications of IS 694 (2010), IS 8130 (1984) &IS 732 (1989). The item shall carry a warranty period of 5 (Five) years from the date of supply.

Cost & Supply of 36/0.3mm (2.5sqmm) FRLS/FRLSH/ZHFR PVC insulated 1100Vgrade as per IS 694/1990 specifications for copper cable to the Government school sites, including all labour charges like Loading & unloading and stacking charges, inclusive of GST and all other Taxes etc., as applicable from time to time, and all other incidental charges etc., complete and confirming to the specifications of IS 694 (2010), IS 8130 (1984) &IS 732 (1989). The item shall carry a warranty period of 5 (Five) years from the date of supply.

Cost & Supply of 20W, 1900 lumens T8, not less than 1100 mm length LED retrofit Tube Light with aluminum anodized body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)-2012 , all fixtures complete , screws, support fixing bushes all relevant & required fixtures etc., complete to the Government school sites,, including all labour charges like Loading & unloading and stacking charges, inclusive of GST and all other Taxes etc., as applicable from time to time, and all other incidental charges etc., Confirming to IS codes 16101 (2012) to 16108 (2012) &IS 732 (1989).

Cost & Supply of 45 W LED Street light Luminaire made of pressure diecast alluminum body with powder coated, having protective toughened glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs having System efficacy > 90 lm/W and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection >10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, screws, support fixing bushes, all relevant & required fixtures etc complete to the Government school sites. including all labour charges like Loading & unloading and stacking charges, inclusive of GST and all other Taxes etc as applicable from time to time, and all other incidental charges etc, Confirming to IS codes 16101 (2012) to 16108 (2012) & IS 732 (1989). The item shall carry a warranty period of 2 (two) years from the date of supply.

Cost & Supply of Modular Switch Board with 12 Module, 8 numbers of 6A/10A one way Modular Switches, 2 numbers of 2 Module Modular type Electronic step type Fan Regulators, Modular Switches & Electronic step type Fan Regulators, on a common Modular switch board, with supply of 12 module Hot dip galvanized metal boxes for switch boards 20/18 SWG Module box with earthing terminal, 12 Modular switch Vertical Cover Frame ,Modular Base & Cover for 12 Modules. screws, support fixing bushes all relevant & required fixtures etc., complete to the Government schools of Andhra Pradesh state, including all labour charges like Loading & unloading and stacking charges, inclusive of GST and all other Taxes etc., as applicable from time to time, and all other incidental charges etc., Confirming to IS CODE 8623 (1993), IS 732 (1989), IS code 1646 (1997) & IS code 8130 (1984). The item shall carry a warranty period of 5 (Five) years from the date ofsupply.

Cost & Supply of Modular Switch Board with 8 Module, 4 numbers of 6A/10A one way Modular Switches, 2 numbers of 2/3 pin 6/10 amps socket, Modular Switches and sockets, on a common Modular switch board, with supply of 8 module Hot dip galvanized metal boxes for switch boards 20/18 SWG Module box with earthing terminal and 8 Modular switch Vertical Cover Frame , Modular Base & Cover for 8 Modules , screws, support fixing bushes all relevant & required fixtures etc., complete to the Government schools of Andhra Pradesh state, including all labour charges like Loading & unloading and stacking charges, inclusive of GST and all other Taxes etc., as applicable from time to time, and all other incidental charges etc., Confirming to IS CODE 8623 (1993), IS code 1646 (1997), IS 732 (1989), & IS code 8130 (1984). The item shall carry a warranty period of 5 (Five) years from the date of supply.

Cost & Supply of ISI 25mm outer dia (1.80 mm thickness) Medium grade FRLS rigid PVC pipe for electrical conduit (For Walls Concealed Wiring) confirming to IS Codes IS:9537 part 3, IS:9537 part 1 and IS 732 (1989) to the Government schools of Andhra Pradesh state, including all labour charges like Loading & unloading and stacking charges, inclusive of GST and all other Taxes etc., as applicable from time to time, and all other incidental charges etc., The item shall carry a warranty period of 5 (Five) years from the date of supply.

Cost & Supply Modular Switch Board with 4 Module, 4 numbers of 6A/10A one way Modular Switches, on a common Modular switch board, with supply of 4 module Hot dip galvanized metal boxes for switch boards 20/18 SWG Module box with earthing terminal and 4 Modular switch Vertical Cover Frame ,Modular Base & Cover for 4 Modules to the Government schools of Andhra Pradesh state, including all labour charges like Loading & unloading and stacking charges, inclusive of GST and all other Taxes etc., as applicable from time to time, and all other incidental charges etc., Confirming to IS CODE 8623 (1993), IS 732 (1989), IS code 1646 (1997) & IS code 8130 (1984). The item shall carry a warranty period of 5 (Five) years from the date of supply.

Supply of Ceiling Fans of 48 (1200mm) Sweep Ceiling Fan at the rated voltage 230V, Rated frequency 50hz,double ball bearings, air delivery more than 210 cubic meter per minute , Speed more than 350 RPM and Power input not more than 50 Watts with all accessories with 100% copper winding , 230 voltage anti corrosion aluminum body , 3 blades with 1.08mm thick aluminum body and blades having average width of 120mm, down rod with 300mm to 450mm length & 19.2mm outer diameter Heavy Gauge , all the factors of fan shall be of corrosion resisting material or suitably and durably protected against corrosion, including cost and conveyance of all materials ,loading ,unloading, stacking at school site and fixing , inclusive of GST and all other Taxes etc., complete as applicable from time to time, and all other incidental charges etc., complete for finished item of work (As per IS : 374-1979) to the government schools in the state of Andhra Pradesh.

Sand filling in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, etc., complete for finished item of work. (APSS NO. 309 & 310) Sand Filling`

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.[RCC SLABS 125mm thick]

Plastering with 2 cost ,12mm thick , base coat in CM(1:5), 8mm thick and top coat in CM(1:3), 4mm thick with Water proof compound Manufacture by reputed mannufacture as approved by engineering incharge at 1Kg per 1 bag of cement including sponze finishinf and cost and conveyance of all matyerials and all labour charges etc., complete for External walls (2nd Class Brick and RR Masonry)

Flooring with polished black Kadapa stones of 15 mm thick set over base coat of CM (1:8) over already laid CC bed/ RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat cement to full depth including cost of all materials like cement, sand and water and flooring stones etc., complete including labour charges for dressing of flooring stones etc., complete for finished item of work.

Providing skirting to internal walls to 15 cm height/ risers of steps with polished Kadapa slabs of 15 mm thick length equal to flooring stones set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth including cost of all materials like Kadapa stone, cement, sand and water etc., complete for finished item of work.

Vibrated reinforced Cement Concrete M 20 Nominal Mix using 20mmsize graded metal(SS 5) HBG M/C metal(Course aggretate)from approved quarry,using a minimum quantity of 350Kgs of cement per 1 cum of concrete incuding cost and conveyance of all materials like cement,fine aggregate(Sand),Course aggregate,water etc to site including centering using casewrina ballies and Wooden runners&staging including all bracings,cross members etc shuttering,machine mixing,laying of concrete,vibrating,lift charges etc complete but execluding cost of steel and its fabrication charges for finished item of work For columns First Floor

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.[CHAJJAS - SUNSHADES First Floor

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.For Lintels First Floor

Vibrated Reinforced Cement Concrete M 20 Nominal Mix ( by Mixer ) using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 Kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Unsupported height up to 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Steel Centering Plates etc., , shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work For Beams (APSS No. 402 & 403) First Floor

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.RCC SLABS 175mm thick First Floor

VRCC 1:1.5:3 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.RCC SLABS 125mm thick First Floor

Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.First Floor

Ornamental Ceiling plastering with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete. First Floor

Plastering with CM (1:5) Single Coat, 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls.First Floor

Plastering with 2 cost ,12mm thick , base coat in CM(1:5), 8mm thick and top coat in CM(1:3), 4mm thick with Water proof compound Manufacture by reputed mannufacture as approved by engineering incharge at 1Kg per 1 bag of cement including sponze finishinf and cost and conveyance of all matyerials and all labour charges etc., complete for External walls (2nd Class Brick and RR Masonry for First Floor)

Flooring with polished black Kadapa stones of 15 mm thick set over base coat of CM (1:8) over already laid CC bed/ RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat cement to full depth including cost of all materials like cement, sand and water and flooring stones etc., complete including labour charges for dressing of flooring stones etc., complete for finished item of work.First Floor

Supplying, fitting and placing MS grilled door, windows including cost and conveyance of all materials and all labour charges etc., complete.[Supplying, fitting and placing MS Grills in First Floor]

Vibrated reinforced Cement Concrete M 20 Nominal Mix using 20mmsize graded metal(SS 5) HBG M/C metal(Course aggretate)from approved quarry,using a minimum quantity of 350Kgs of cement per 1 cum of concrete incuding cost and conveyance of all materials like cement,fine aggregate(Sand),Course aggregate,water etc to site including centering using casewrina ballies and Wooden runners&staging including all bracings,cross members etc shuttering,machine mixing,laying of concrete,vibrating,lift charges etc complete but execluding cost of steel and its fabrication charges for finished item of work For columns Second Floor

Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure. Second Floor

Plastering with 2 cost ,12mm thick , base coat in CM(1:5), 8mm thick and top coat in CM(1:3), 4mm thick with Water proof compound Manufacture by reputed mannufacture as approved by engineering incharge at 1Kg per 1 bag of cement including sponze finishinf and cost and conveyance of all matyerials and all labour charges etc., complete for External walls (2nd Class Brick and RR Masonry for Second Floor)

Supply & Fixing of Class Room Door of Size 1200mm x 2100mm Powder Coated Galvanized Steel door