Construction of Dilapidated Upper Primary at Girls Middle School Adipora

Earth work in excavation in all kinds of soil by Manual/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work..

Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:3:6 (1Cement: 3 coarse sand: 6 grade stone aggregate 20mm nominal size) including all carriages.

Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level uoto floor five level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages.

Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length including hold fast lugs or with dash fasteners Chemically seasoned Hollock Wood including all carriages.

Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. including all carriages.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages.

Providing and fixing of High Rib Sheet Roofing incld cost of J Hooks,Washers nails 0.50 mm thick incld cost of overlapped sheets complete Job incld all carriages.

Providing and fixing of Ridges Hips/Valleys ornamental of Colour G.I Sheets Incld cost of Screws /Washers all complete Job incld carriage.

12mm Cement plaster of mix in 1 : 6 ( 1 cement : 6 coarse sand) including all carriages.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick incld carriage.

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications.Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm incld all carriages.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).35 mm Second kail wood incld all carriages complete Job.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 14587 incld all carriages.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including all carriages.

Providng and fixing of of Hardware Items of ISI Marked of Standard Quality and Make.Handles 125 mm Brass.

Providng and fixing of of Hardware Items of ISI Marked of Standard Quality and Make.Handles 100 mm Brass.

Providng and fixing of of Hardware Items of ISI Marked of Standard Quality and Make.T Bolts 100 mm Brass.

Providng and fixing of of Hardware Items of ISI Marked of Standard Quality and Make.Concealed Locks 200 mm.

Providng and fixing of of Hardware Items of ISI Marked of Standard Quality and Make.T Bolts 150 mm.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 40 mm thick with 20mm nominal size stone aggregate, including all carriages.

Providing and fixing of 4 mm thick glass pans to clrestory Windows Shutter (Area of opening for glass Panes excld portion inside shall be measured) incld all carriages.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete, Size of tile 600x600 mm, including all carriages.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent incld all carriages.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete, Fixed to steel windows by welding, including all carriages

Electrification:Wiring for Light Point Fan Point /Exhaust Fan/Bell Point With (P+N+E) 3x1.5 Sq.mm FRLS-H PVC Insulated Multi Strand Copper Conductor single core Cable,(Havells/Polycab/Anchor/Eq Make) in surface /recessed Conduit laid in slabs ( Incld cost of Conduit 25 mm) with 01 No of 6 Amp Modular Switch, Modular plate, Cover in front and Suitable GI box etc ISO/IEC certified /Schneider/Havells/Legrand /Anchor roma plus/ABB/Eq.Make & Along with 2.5 Sqm (P+N+E) circuit Wire of Same make as mentioned above & Items shall be approved before execution of works by SDO.

Supply and fixing Two Module Stepped type Elecronic fan regulator on the existing modular plate switch box incld connections but excluding modular plate etc as required,ISO /IEC certified of Havells/Legrand/Anchor/Schneider/ABB/Eq Make and shall be approved before execution of work by SDO.

Wiring for Power Plug with (P+N+E) 3x4 sqmm FRLS-H PVC Insulated Multi Strand Copper Conductor Single Core Cable in surface/Recessed conduit (Havells/Polycab/Anchor/Eq Make).

Supply and fixing of suitable size GI Box with Modular Plate and Cover in front on Surface or in recess, including providing and fixing 6 Pin 5/6 & 15/16 A Modular socket outlet and 15/16 A Modular switch, connection etc as required ,ISO /IEC certified /Legran/Anchor roma plus /Schneider/ABB/Eq Make and Shall be approved before execution of works by SDO

Wiring for 6 Amp Plug (Computer Point) with (P+N+E) 3x2.5 Sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in Surface /Recessed conduit (Havells/Polycab/Anchor/Eq Make).

Supplying and fixing of Suitable Size GI box with Modular Plate cover and cover in front on surface or in recess, incld Providing and fixing 2 nos, 3 Pin 5/6 A modular socket outlet and 2 nos.5/6 A modular switch ,connection etc as required (For light plugs to be used in non residentail buildings), ISO/IEC certified Havells /Legrand/Anchor roma plus /Schneider /ABB/Eq.Make and shall be approved before execution of work.

Supply/Fixing /Testing and Commissioning of 6 Amp to 32 Amp Rating SP,240 V,*C* curve 10 k, Miniature circuit Breaker suitable for inductive load of following poles in existing MCB.DB complete with connection (L&T/Siemens/Legrand/Havells/ABB/Eq Make).

Supply /Fixing /Testing and Commissioning of following rating, Double Pole (P+N) 240 V C* Curve 10 K Maniature Circuit Breaker (MCB) in the existing MCB DB complete with.100 Amp

Supply and fixing of MCB 12 Way Horizontal typed sheet steel Double Door Distribution Board,SPN 240 V, on surface /recess complete with tinned copper bus bar ,neutral bus bar,earth bar , din bar, interconnections ,Powder painted incld eathing etc as required (L&T/Siemens/Legrand/Schneider/ABB/EQ Make).

Supply/Installation/Testing and Commissioning of 15 W LED Conceal /Surface depending on the type of ceiling (Commercial Type) light Luminary fitting round shape with Minium system Lumen efficacy of 100 lm/W with pressure Die cast Aluminium Heat Sink and P.F.>0.95,THD<10%,CCT 5700k,CRI 80.The LED With useful life of 50000 Hrs at L70.The Input voltage range shall be 150 v to 270 V .The Fixture should have in -Built surge Protection of 2k V. Crtificataion:-LM79 & LM80 test report should be from Govt approved In-House NABL lab/Government of india authorized lab.The Job includes AMC (reckoned from date of sucessful commissioning) of lighting fixtures for a period of Two years which includes replacement of fixtures of Philips/Havells /Wipro /Halonix /Eq Make.

Supply /Installation/Testing and Commissioning of 1200 mm Sweep,Ceiling fan with 03 NO blades ,30 cm long down rod, 02 No.Canopies ,shackle kit, Power factor not less than 0.90 ,service value including safety Pn, Nut bolts,washers ,temperature rise =75 degree C (max) , insulation resistance more than 2 mega ohm, suitable for 230 V ,50 HZ Single Phase Supply etc Complete as greaves /Eq make ( Minimum 1-star).

Supply/laying /Connecting and Commissioning of 25 Sq.mm 2-core XLPE/PVC insulated and un-armoured 1.1 KV grade Aluminium Cable of Havells /Polycab /Eq Make with required size of thimbles dully crimped with Hydraulic crimping tool incld Providing and fixing of saddlers /Clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having corrugation on outer wall and plain surface inner wall conforming to IS :14930 Part-l and 2 complete with acessories for protection of 1.1 KV Grade under ground cable Directly in Ground at a depth of 50 CM incld excavation and refilling the Trench.(Material to be approved before execution).

2x10 Sq.mm +1x6 sq.mm earth wire from ground floor DB to first floor DB of Havells /Anchor /Eq Make incld all carriages.