Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹2.4 L
Closing Date
6 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
16 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Electrical License: The tenderer should have valid minimum 'B' Grade Electrical Contractor's License issued by State Electrical Licensing Board. The license should have been issued on date prior to the date of Tender opening."
Definition of Similar nature of Work is "Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc., (With or without supply of items/equipments) for 230V, 1 phase or 415V, 3phase system or higher voltage." (Authority: As per CEE/HQ/SC's.lr.No.E.29/P/Similar nature of works dtd.30.12.2014 S.No.3)
The tenderer must have successfully completed or substantially completed any one of the following categories of works during last 07 (seven) years, ending last day of month previous to the one in which the tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, (or) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, (or) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. As per Clause 10.1 of IRSGCC-2022. Tenderer should attach Self-attested/Digitally signed copy of Experience Certificate [provided in annexures] issued by Officer not below the rank of JA Grade or Bill Passing Officer in Railways and Bill Passing Officer / Executive In-charge of work in other Govt. / Govt. bodies / Public Sector Undertaking/Authorised signatory of Private organizations. The certificate should bear the signature and seal of the issuing officer, name of the department etc. and non compliance/nonsubmission/ incomplete of the information similar to the attached format shall result in summarily rejection of his/their bid.
Tenderer Credentials: Documents testifying tenderer previous experience and financial status should be produced along with the tender. (a)Certificates and testimonials regarding contracting experience for the type of job for which tender is invited with list of works carried out in the past. (b)Audited Balance Sheet duly certified by the Chartered Accountant regarding contractual payments received in the past. (c)The list of personnel / organization on hand and proposed to be engaged for the tendered work. Similarly list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work. (d)A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed in Annexures. Non submission of a copy of certificate by the tenderer shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested / digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document. (e)The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway there under. (f)(a) In case of any information submitted by tenderer is found to be false, forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Bid Security besides banning of business for a period of up to five years. (b) In case of any information submitted by tenderer is found to be false, forged or incorrect after the award of contract, the contract shall be terminated. Bid Security, Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of up to five years. Non-compliance with any of the conditions set forth therein is liable to result in the tender being rejected.
22 conditions · 3 needing a document upload
Documents to be submitted along with the tender: (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
Following documents shall be submitted by the tenderer: (a) Sole Proprietorship Firm: All other documents in terms of Para 10 of the tender form (Second sheet) of tender document b)HUF: i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. ii)All other documents in terms para 10 of the tender form (Second Sheet). (c) Partnership Firm: 1.The Partnership Firms participating in the tender should be legally valid under the provisions of the Indian Partnership Act. 2.The partnership firm should have been in existence or should have been formed prior to submission of tender. Partnership firm should have either been registered with the Registrar or the partnership deed should have been notarized prior to date of tender opening as per the Indian Partnership Act. prior to submission of tender. 3) Separate identity/name should be given to the partnership firm. The partnership firm should have PAN / TAN number in its own name and PAN / TAN number in the name of any of the constituent partners shall not be considered. The valid constituents of the firm shall be called partners. 4.Once the tender has been submitted, the constitution of the firm shall not normally be allowed to be modified / altered / terminated during the validity of the tender as well as the currency of the contract except when modification becomes inevitable due to succession laws etc., in which case prior permission should be taken from Railway and in any case the minimum eligibility criteria should not get vitiated. The re-constitution of firm in such cases should be followed by a notary certified Supplementary Deed. The approval for change of constitution of the firm, in any case, shall be at the sole discretion of the Railways and the tenderer shall have no claims what-so-ever. Any change in the constitution of Partnership firm after submission of tender shall be with the consent of all partners and with the signatures of all partners as that in the Partnership Deed. Failure to observe this requirement shall render the offer invalid and full Bid Security shall be forfeited. If any Partner/s withdraws from the firm after submission of the tender and before the award of the contract, the offer shall be rejected and Bid Security of the tenderer will be forfeited. If any new partner joins the firm after submission of tender but prior to award of contract, his / her credentials shall not qualify for consideration towards eligibility criteria either individually or in proportion to his share in the previous firm. In case the tenderer fails to inform Railway beforehand about any such changes / modification in the constitution which is inevitable due to succession laws etc. and the contract is awarded to such firm, then it will be considered a breach of the contract conditions liable for determination of the contract under Clause 62 of the standard General Conditions of Contract. 5.A partner of the firm shall not be permitted to participate either in his individual capacity or as a partner of any other firm in the same tender.
Tenderers should attach self attested copy of PAN CARD & Photo Identification in Support of their IDENTITY. (2)The documents attached to the tender document should be clear and legible for evaluation of tenders. Proper care to be taken in this regard.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The prospective tenderers are advised to follow the IRSGCC with amendments from time to time together with conditions, Special Conditions and specifications which are annexed to the tender document and attached to the tender. The documents attached to the tender document should be clear and legible for evaluation of tenders. Illegible copies will not be considered for evaluation.
The items of cumulative value greater than 5 Lakh from all the schedules shall require RITES inspection.
The prospective tenderers are advised to follow the IRSGCC with amendments from time to time together with conditions, Special Conditions and specifications which are annexed to the tender document and attached to the tender. The documents attached to the tender document should be clear and legible for evaluation of tenders. Illegible copies will not be considered for evaluation.
All terms and conditions in the tender document are binding on the tenderers.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere the instructions and directions given at different pages
All the required/supporting documents should be scanned and uploaded
If the Tenderer(s) deliberately give(s) wrong information/ incorrect documents in his/their tender or create circumstances for the acceptance of his/their tender, the Railway reserves the right to reject such tender at any stage. The entire EMD/ Bid Security and any other dues available with Railway against that contract will be forfeited. Action will be taken to suspend the business with the tenderere for a period of one year. In addition, Administration reserves the right to prosecute under suitable law
All terms and conditions in the tender documents are binding on the Tenderers.
Railways reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning the reason for any such action
The Tenderers are advised to visit the site of work in their own interest and acquaint themselves with the site conditions and expected quantum of work and assess all the site specific difficulties to be experienced while executing the same and the rate shall be arrived duly considering all the facts above and quoted in the tender. Any representation at a later date specifying the site difficulties shall not be considered
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However , opening of tenders online will be on any convenient day after the closing date/time of tenders
After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm/Partnership F i r m / R e g i s t e r e d Company/Registered Trust/Registered Society/HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suomoto cognizance of any document available in public domain (i.e. on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted.
JV is not allowed for the present tender
The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
Unreleased EMD/ Bid Security, if any, held with the Railway Administration, shall not be adjusted towards the EMD/ Bid Security to be remitted.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time
All rates quoted in the tender shall be deemed to be inclusive of all Taxes royalties payable by the contractor{s} to the Government or public body or local authority and no additional amount will be paid or claim entertained on this account by the Railway
BZA division -Provision of Electrical arrangements for proposed Station Building and Platform shelters[COP] at Kovvur Railway station.
BZA-GSU-Elec-34-2025-26
BZA-GSU-Elec-34-2025-26
Open
Works - General
9 Months
Krishna, Andhra Pradesh
₹0
₹2.4 L
6 Mar 2026
10 Feb 2026
216 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 65,53,244.66 | ||
| — | Breakup | for details. | — | ||
| Supply of following sizes of LTUG cable, XLPE insulated, stranded, PVC outer sheathed armoured with galvanized round steel wire or steel strip and with aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988 with all amendments or latest Makes Mentioned as per Tender Document. | — | — | — | 18,15,200 | |
| — | Breakup | for details. | — | ||
| Laying, testing and connecting of following sizes XLPE LT UG cable as per specification enclosed. | — | — | — | 1,48,500 | |
| — | 3500.00 | — | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with UG cable for earth continuity. | — | — | — | 52,500 | |
| — | 60.00 | — | — | ||
| Supply & Erection of cable markers in cable route. | — | — | — | 14,580 | |
| — | 800.00 | — | — | ||
| Prov.for Excavation of Cable trench complete in all types of soils except hard rock. | — | — | — | 1,04,000 | |
| — | 350.00 | — | — | ||
| b) Prov.for Excavation cable trench duly breaking hard concrete / bitumen top / under the track / road etc. | — | — | — | 1,21,800 | |
| — | 1200.00 | — | — | ||
| Supply and erection of ISI marked HDPE pipe of PE-100 grade PN 6 class of 3 inch nominal dia with all necessary accessories to fix with any structure.[Makes mentioned in tender document] | — | — | — | 3,46,800 | |
| — | 2000.00 | — | — | ||
| Supply and erection of ISI marked HDPE pipe of PE-100 grade PN 6 class of 1 1/2 inch nominal dia with all necessary accessories to fix with any structure. | — | — | — | 1,80,000 | |
| — | 100.00 | — | — | ||
| Track crossing/ Road Crossing by horizontal boring method at culverts/track/pucca road based on RDSO report no BS-105.This also includes insertion of HDPE pipe of upto 110 mm/G.I Pipe of 100 mm in the bore drilled (Supply of HDPE pipe & GI pipe is not included) | — | — | — | 2,26,400 | |
| — | 10.00 | — | — | ||
| Supply, erection, fixing and commissioning of Distribution board (SPN DB, 8way- metal door IP 43 Protection) comprising of 40A DP MCB-1 No. for I/C and 6 Nos, of 10A SP MCBS, for O/g, with all connected accessories including transportation. makes mentioned in tender documents | — | — | — | 48,760 | |
| — | 10.00 | — | — | ||
| Supply and installation of 10" x 10" x 6.2" Junction box Make: Sintex or equilent with IP 65 protection, fitting with tinned coper terminal blocks, brass cable glands, internal earth strip, mounting accessories, cable lugs and complet internal wiring labelling and earthing connection, with all necessary accessories such as MS flats, clamps nuts and bolts etc. Makes Mentioned in Tender Document | — | — | — | 17,500 | |
| — | Breakup | for details. | — | ||
| Supply of 25mm dia 2mm thick P.V.C. pipe (ISI MARK) concealed in roof slab and wall with all required accessories such as deep boxes, bends, junction boxes etc. including grooving (if required), including masonry work and labour charges etc. | — | — | — | 57,600 | |
| — | Breakup | for details. | — | ||
| Supply & Laying of 32mm dia 2mm thick surface P.V.C. pipe (ISI MARK) with all required accessories such as deep boxes, bends, junction boxes etc. including grooving (if required), including masonry work and labour charges etc. | — | — | — | 40,000 | |
| — | Breakup | for details. | — | ||
| Supply, fixing and connecting of modular switch &socket as of Makes Mentioned in Tender Document including all accessories complete. | — | — | — | 74,660 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of Ivory/White coloured Polycarbonate Modular plate with Polycarbonate surface box / Metal surface box / Metal flush box (for concealed) with all accessories complete, Makes Mentioned in Tender Document including all accessories complete. | — | — | — | 65,580 | |
| — | 90.00 | — | — | ||
| Supply of surface mounted 4' - 40W LED light fitting batten type including power LEDs complete with all accessories of makes mentioned in the tender document | — | — | — | 59,850 | |
| — | 30.00 | — | — | ||
| Supply of 2' x 2' 40W LED Recess mounted light fitting including power LEDs complete with all accessories of makes mentioned in the tender document | — | — | — | 69,090 | |
| — | 30.00 | — | — | ||
| Supply of 1' x 1' 24W LED celling surface light fitting including power LEDs complete with all accessoriesof makes mentioned in the tender document | — | — | — | 46,590 | |
| — | 20.00 | — | — | ||
| Supply of 15W LED Panel (Round) luminiries with diffuser and electronic driverof makes mentioned in the tender document with all necessary accessores complete. | — | — | — | 18,360 | |
| — | 170.00 | — | — | ||
| Fixing of above LED fittings in the ceiling with necessary Drilling/cutting/clamping work with all connected accessories. | — | — | — | 6,800 | |
| — | 90.00 | — | — | ||
| Supply of Ceiling fan of Energy efficiency 28W BEE 5star rating, Fan motor of inverter driven controlled by microprocessors (BLDC), of makes mentioned in the tender document | — | — | — | 2,00,700 | |
| — | 90.00 | — | — | ||
| Fixing and connecting of BLDC 1200mm sweep star rated ceiling fan with all accessories i.e. Canopy, down rod etc, complete. | — | — | — | 4,050 | |
| — | 50.00 | — | — | ||
| Supply of SS type cell phone charging tray as per the attached diagram, Sheet thickness: 18guage and Grade : SS sheet 202 grade. All the dimensions are in mm. Warranty as per IRS conditions.[The tray shall be provided as per the directions of supervisor incharge] | — | — | — | 6,431 | |
| — | 22.00 | — | — | ||
| Supply, fixing and connecting of window mount 12" sweep Heavy duty exhaust fan made of Alloy steel of 50W with noise level of complete with all accessories of makes mentioned in tender document. | — | — | — | 57,838 | |
| — | 4.00 | — | — | ||
| Supply, fixing, testing and connecting of wall mounted heavy duty Air Circulator of 18" (450mm) size with built in 3speed regulator, delivers Air 150m3/h with all accessories complete. The Air Circulator is to be fixed by suitable MS clamps of size 50x50x6mm / flats of size 40x6mm with bolts and nuts etc., as desired by site engineer of makes GEC Alsthom India Ltd. Almonard Pvt. Ltd. Usha International Ltd. GEC, Polar, Orient, Phillips, Bajaj Electrical Ltd., Crompton Greaves Ltd., Khaitan. | — | — | — | 29,900 | |
| — | Breakup | for details. | — | ||
| Wiring with two runs of 1.5 Sq.mm 1100V and one run of flexible copper conductor 1.5Sq.mm 1100V FRLS PVC insulated wires ISI marked (Phase, neutral and earth) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, 6A Bell push modular type switch, ceiling rose, bulb holder and modular type plate cover to G.I switch control box includingWiring with two runs of 1.5 Sq.mm 1100V and one run of flexible copper conductor 1.5Sq.mm 1100V FRLS PVC insulated wires ISI marked (Phase, neutral and earth) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, 6A Bell push modular type switch, ceiling rose, bulb holder and modular type plate cover to G.I switch control box including all labour charges complete for light points, ceiling fan points and exhaust fans points etc. all labour charges complete for light points, ceiling fan points and exhaust fans points etc, The material shall be supplied as per makes mentioned in tender document. | — | — | — | 1,33,276 | |
| — | 2.00 | — | — | ||
| Supply erection, fixing and comissioning of CITRA 400MM Gold Tube Stainless Steel K9 Crystal Pendant Chandelier Ceiling Lamp Foyer Lights Lamps Modern Hanging - Warm White,Corded Electric of 600mm adjustable hanging arrangment, and diameter of 400mm with all connected accessories complete. | — | — | — | 19,998 | |
| — | 3.00 | — | — | ||
| Supply fixing and commissioning of instant electric water Geysers 4.5 KW with 3 L volume of AO smith/Crompton/Bajaj/Vijay/Havells make with all necessary accessories complete | — | — | — | 15,900 | |
| — | 10.00 | — | — | ||
| Providing and laying in position cement concrete of specified grade 1:3:6 (1 cement : 3 manufactured sand derived from Recycled concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size Recycled Aggregate (RA) ) for plint under the Main distrubution board and for fixing of 4" Channel over ground including digging of appropriate depth and dimensions as advised by Site incharge.. | — | — | — | 58,150 | |
| — | 20.00 | — | — | ||
| Supply and erection of Earth pit as Per specifciation RDSO Drg No.ETI/OHE/P/7021 Rev.A or latest. including Electrode, earthing enhancement materials etc. The earth pit shall comprise of following materials and shall be done as explained. (i) Excavation of earth for one pit in any soil and refilling(as per the Drg No. RDSO Drg No.ETI/OHE/P/7021 Rev.A or latest). (ii)Supply and erection of "B" Class GI pipe dia 50mm, 3.1 mtrs length including GI socket and nutsAs per RDSO Drg No.ETI/OHE/P/7021 Rev.A or latest.(iii) Drilling of 26 Nos of 12mm dia holes on GI pipe dia 50mm. (iv) Supply and erection of Charcoal - 45 Kgs for each earth pit (v)Supply and erection of Salt -35 Kgs for each earth pit. (vi) Supply and erection of pre fabricated RCC of size 0.55m X 0.55M(550mm) with wall thickness of 0.125m(125mm) with height 0.3m (300mm) along with RCC(1:4:8) cover with .04m thickness(40mm) and funnel with iron mesh. As per RDSO Drg No.ETI/OHE/P/7021 Rev.A. (vii)Supply, laying and connecting of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280-2006 or latest, it is to be laid & connected from equipmet to earth electrode for continuity-per site condition. (viii) Transportation charges including loading & unloading of earthing system material to site/location. and complete erection including all connectections with all necessary accessories complete. | — | — | — | 67,000 | |
| — | 100.00 | — | — | ||
| Supply, lying of 20mm dia FlexibleElectric Wire Cover PVC ConduitCorrugated Tube Pipe for serviceconnections to protect/conceal thewiring arrangements | — | — | — | 2,000 | |
| — | Breakup | for details. | — | ||
| Supply, laying, connecting and commissioning of single core 1.5 Sq.mm. 1100 PVC (FRLS) insulated multi stranded copper conductor wires confirming to IS:694/1990 or latest and ISI marked in existing PVC conduit pipe. Makes Mentioned as per Tender Document | — | — | — | 59,400 | |
| — | Breakup | for details. | — | ||
| Supply, laying, connecting and commissioning of single core 2.5 Sq.mm. 1100 PVC (FRLS) insulated multi stranded copper conductor wires confirming to IS:694/1990 or laetst and ISI marked in existing PVC conduit pipe. Makes Mentioned as per Tender Document | — | — | — | 77,000 | |
| — | Breakup | for details. | — | ||
| Supply, laying, connecting and commissioning of single core 4.0 Sq.mm. 1100 PVC (FRLS) insulated multi stranded copper conductor wires confirming to IS:694/1990 or laetst and ISI marked in existing PVC conduit pipe. Makes Mentioned as per Tender Document | — | — | — | 28,800 | |
| — | Breakup | for details. | — | ||
| Supply, laying, connecting and commissioning of single core 6.0 Sq.mm. 1100 PVC (FRLS) insulated multi stranded copper conductor wires confirming to IS:694/1990 or laetst and ISI marked in existing PVC conduit pipe. Makes Mentioned as per Tender Document | — | — | — | 29,120 | |
| — | 3.00 | — | — | ||
| Supply fixing and comissioning of Hand Dryer of 1800 W with Plastic body with 1 min auto cut with sensing range 20cm (+/- 5cm) with drying time of 30 sec with all connected accessories complete of Insha/Euronics/Dolphy Inida/Novatech/Jaguar make etc. | — | — | — | 16,170 | |
| — | 1.00 | — | — | ||
| Supply installation Testing and commissioning of 6 KVA on line UPS system confirms to IS 16242(Part-I):2014 and IEC 60240-1 : 2008 with IGBT technology pure sine wave out put, double conversion with auto and manual static by pass switch single phase input / Single phase output. Makes : Luminous/APC/Microtek/Amaron. | — | — | — | 84,299 | |
| — | 1.00 | — | — | ||
| Supply and fixing of 12V 150 AH SMF battery with 3 years warrenty including wire leads,connections etc complete., with suitable stand Makes : Amaron/exide/Luminous/Microtek. | — | — | — | 17,160 | |
| — | 6.00 | — | — | ||
| Supply and fixing of 20/32 Amps metal clad plug and socket with Sheet steel enclosures of Indo Asian make model no.KSPSAN20 including 20A/32A DP MCB and labour charges complete with all conneted materials and works.makes L&T,Indo Asian, havells, schneideir, C&S. | — | — | — | 4,278 | |
| — | Breakup | for details. | — | ||
| Supply, Transportaion of 5mtr long hot dip galvanisedOctagonal pole (IS 875) with 130mm bottom A/F & 70mm topA/F made up of 3mm thick HT sheet (S 355 JO steel plate forshaft), along with base plate IS 2062 of size 200x200x12mm,M16x600 long J type EN8 grade foundation bolts, 1000mm longDouble/Single arm bracket Including the Supply of Suitablebolts with Bakelite Sheet with MCB ( for mounting inside thebase compartment of pole) complete. Make:Bajaj/Valmont/Transrail/Utkarsh/Skipper/Laasma. | — | — | — | 83,100 | |
| — | Breakup | for details. | — | ||
| Supply fixing, testing and connection of 30W LED type weather proof street light fitting including power LED's complete with all accessories of makes mentioned in the tender document | — | — | — | 19,668 | |
| — | 1.00 | — | — | ||
| a) Design, fabrication, erection and commissioning of 12mtrs., High Mast system, hot dip galvanized with all accessories along with the following for each High Mast as per specification enclosed, as desired by site engineer. a) Head frame, steel wire rope, double drum winch lantern carriage suitable for 6 luminaries symmetrically including control gear boxes and lighting finial with all accessories - 01 Set b) Design and casting of suitable cement concrete shallow foundation for high mast. The safe bearing capacity of the soil is 10T/sq.m - 01 Set c) Foundation bolts, manufactured from special steel along with nuts, washers, anchor plates, templates complete set as required for each mast. - 01 Set. d) High powered nonreversible power tool complete with all accessories - 01 Set. e) Aviation obstruction lighting system complete - 01 Set f) Supply, erection and commissioning of 4 way LT control panel in IP54 construction along with 02 Nos of automatic timer switches and 01 No., of 63A TPN, 10KA MCB and 01 No., of 63A 3 pole modular contactor, 01No.of multiple pin plug socket with all accessories. Make:Bajaj/Valmont/Transrail /Skipper/Laasma/Utkarsh. | — | — | — | 2,14,294 | |
| — | 1.00 | — | — | ||
| Supply, Fabrication and Erection of Protective fencing / baricade for the High mast with 2.5 mtrs High rail post spaced at 2 mtr distance (Square) with horizantal rail bracings. The rail bracings shall be fixed on the vertical rail post at a distance of 0.5 mtr from the ground and other shall be fixed at a distance of 0.75 mtr and 0.75 mtr with adequate size clamps madeout of 40 mm wide x 5 mm thick flat with adequate number and size holes with bolts and nuts etc., The vertical rail shall be burried 500 mm below the ground duly escavating foundation pit and filling of cement concrete and couping of size 600 mm x 600 mm shall be provided to the vertical rail above the ground. (Rail poles will be supplied by Railways which shall be transported by the agency to the site). | — | — | — | 13,960 | |
| — | Breakup | for details. | — | ||
| Supply, fixing and connecting of 120W LED Flood Light fitting complete with all accessories of makes mentioned in the tender document | — | — | — | 37,854 | |
| — | 150.00 | — | — | ||
| Design, manufacture, display of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. | — | — | — | 3,91,950 | |
| — | 150.00 | — | — | ||
| Erection and installation of wall / hanging / floor mounting type LED lluminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick | — | — | — | 39,300 | |
| — | 6.00 | — | — | ||
| Supply and fixing of 8 way (8+24 module)single/three phase outgoing TPN Vertical Distributionbox. similar to model no. DHDMTVOSRW08 in Havells. Make Mentioned in tender document | — | — | — | 70,416 | |
| — | 6.00 | — | — | ||
| Supply and erection of C curve FP MCBs of 63 A withall connected accessories. Make Mentioned in tender document | — | — | — | 14,472 | |
| — | 60.00 | — | — | ||
| Supply and erection of C Curve/Series SPN MCB of10/16/20/32 A as advised by the engineer incharge with all connected accessories Make Mentioned in tender document | — | — | — | 45,180 | |
| — | 1.00 | — | — | ||
| "Design, fabrication, transportation, supply, erection and commissioning of of 3 phase and neutral 415 V, 4 wire, free standing out door/ Indoor type floor mounted / wall mounted / Pole mounted LT Panel, with Double Door made up of 14 SWG CRCA sheet after SEVEN TANK PROCESS and painting with EPOXY powder coating. The panel shall consist of suitable size TPN tinned Copper bus bar(not less than 400A capacity) of required shape supported with appropriate DMC / SMC barriers and colour coded with heat shrinkable sleeves. (The metering/switchgear shall be provided / fixed as specified in the scope of work, switch gear cost will be paid separately). Note: The Design, Scheme, Dimensions needs to be submitted to Competent Authority for approval before fabrication of panel. Panels of required size(s) out of the scheduled quantity shall be made to provide at multiple locations as per site requirement." The switchgear shall be as per makes mentioned in tender document. | — | — | — | 42,966 | |
| — | 1.00 | — | — | ||
| a)Supply, erection connecting and commissioning of switchgear in the MDBs, DBs: 250A, 36kA, 4 pole microprocessor MCCB with adjustable over load setting, Ir=0.4 to 1of In, adjustable short circuit current setting, Isd=1.5 to 10 times of Ir. Ics=100% Icu. makes mentioned in tender document | — | — | — | 26,207.28 | |
| — | 2.00 | — | — | ||
| b)Supply, erection connecting and commissioning of switchgear in the MDBs, DBs: 160A, 36kA, 4 pole microprocessor MCCB with adjustable over load setting, Ir=0.4 to 1of In, adjustable short circuit current setting, Isd=1.5 to 10 times of Ir. Ics=100% Icu. makes mentioned in tender document | — | — | — | 36,389.86 | |
| — | 2.00 | — | — | ||
| c)Supply, erection connecting and commissioning of switchgear in the MDBs, DBs: 80/100A, 25kA, 4 Pole MCCB. (adjustable Thermal setting) , Ics=100% Icu, Adjustable overload setting Ir=0.8 to 1 times of In, with fixed short circuit setting. makes mentioned in tender document | — | — | — | 11,298.52 | |
| — | 4.00 | — | — | ||
| d)Supply, erection connecting and commissioning of switchgear in the MDBs, DBs: 25 to 63A, 25kA, 4 Pole MCCB. (adjustable Thermal setting) , Ics=100% Icu, Adjustable overload setting Ir=0.8 to 1 times of In, with fixed short circuit setting. makes mentioned in tender document | — | — | — | 21,520 | |
| — | 6.00 | — | — | ||
| Supply and fixing of wall /floormounting type voltage stabiliser of V-guard VG 500 voltage stabiliser forAC upto 2Ton (170-270 V) with allconnected accessories and workssimilar make of V-guard , keeline, Microtek, Havells. | — | — | — | 11,880 | |
| — | Breakup | for details. | — | ||
| — | 1.00 | — | — | ||
| — | 2.00 | — | — | ||
| — | — | — | 25,704 | ||
| — | 6.00 | — | — | ||
| — | — | — | 38,556 | ||
| — | 6.00 | — | — | ||
| Supply of Safety Belt | — | — | — | 1,530 | |
| — | 2.00 | — | — | ||
| Supply of First Aid Box including medicines. | — | — | — | 3,150 | |
| — | 2.00 | — | — | ||
| "Supply of Provision of rubber mats of 2m X 1 m X 10mm thick (or suitable size as advised by site supervisor) as per IS Spec." | — | — | — | 4,182 | |
| — | 4.00 | — | — | ||
| Supply of Shock treatment boards. | — | — | — | 3,600 | |
| — | 4.00 | — | — | ||
| Supply of 11kV Hand Gloves. | — | — | — | 240 | |
| — | — | — | 1,10,41,156.2 | ||
| — | Breakup | for details. | — | ||
| Supply of following sizes of LTUG cable, XLPE insulated, stranded, PVC outer sheathed armoured with galvanized round steel wire or steel strip and with aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988 with all amendments or latest Makes Mentioned in Tender Document | — | — | — | 40,55,400 | |
| — | Breakup | for details. | — | ||
| Laying, testing and connecting of following sizes XLPE LT UG cable as per specification enclosed. | — | — | — | 4,13,900 | |
| — | 10000.00 | — | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with UG cable for earth continuity. | — | — | — | 1,50,000 | |
| — | 70.00 | — | — | ||
| Supply & Erection of cable markers in cable route. | — | — | — | 17,010 | |
| — | 2000.00 | — | — | ||
| Supply and erection of ISI marked HDPE pipe of PE-100 grade PN 6 class of 3 inch nominal dia with all necessary accessories to fix with any structure.Makes Mentioned in Tender Document | — | — | — | 5,78,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ACS-1to101.pdf
TechnicalSpecificationswithitemsexplanations2.pdf
checklistandmandatorydocs.pdf
MastertenderDocument.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .