Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.6 LAccepted-AOC | L1 | Accepted-AOC BEING THE LOWEST BIDDER | |
| 2 | L2₹19.6 L+₹2.6 L (15.4%)Rejected-Finance MOH SWAMI PADAM JAHANGIRPUR GREATER NOIDA GAUTAM BUDH NAGAR UP 203141 | GREATER NOIDA | GAUTAM BUDH NAGAR | UTTAR PRADESH | 203141 | L2 | Rejected-Finance OTHER THAN THE LOWEST BIDDER |
Tender Value
₹18.2 L
EMD Value
₹36,360
Closing Date
20 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHUJ
GE (AF) BHUJ ,KHAVDA ROAD, BHUJ GUJARAT-370001
REPLACEMENT OF BER TAMPER PROOF ELECTRIC METER TO PREPAID IN CERTAIN SMQs AND WORKS SERVICES FOR INDUCTION OF PROJECT SDR AND CERTAIN WKS SERVICES FOR SATCOM BLDG AT AF STN BHUJ
2023_MES_582491_1
8650/V/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (AF) BHUJ
AS PER NOTICE OF TENDER
7 documents required · 7 mandatory
₹500
Yes
GE (AF) BHUJ
₹36,360
Yes
30 Mar 2023
23 Feb 2023
22 Mar 2023
23 Feb 2023
20 Mar 2023
8 Mar 2023
28 Feb 2023 - 4 Mar 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
Material & labour for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate in sub base of floors etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for vitrified ceramic dark shade 10 mm thick (sqaure/rectangular) area of each tiles n.exc. 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing tiles and including 15 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.
All as per Ser Item No 3.00 above but in vertical surfaces such as dado, skirting and riser including rendering 10mm thick in CM 1:4 etc complete all as specified and directed by Engineer-in-Charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /blankets/slabs, any description and any thickness including cover fillets, cornices, etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for false ceiling of perforated particle board / tiles 60x60 cm in size and 12 mm thick fixed with nails to timber frame work or with staples on snap grid fixed with screws in wall/ceiling, grid made of aluminium/GI/MS etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for 8 mm thick fire resistant seamless calcium silicate ceiling made out of 600x600 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish including necessary frame work complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster any description on brick wall , concrete surfaces including raking down joints hacking for key secrubing down with water remove dust, debries/rubbish etc complete all as specified and directed by Engineer-in-Charge
Material & labour for 15 mm thick rendering for fair faces of stone/brick masonry walland in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge
Material & labour for 10 mm thick rendering for fair faces of concrete surfaces on wall in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge
Material & labour for preparing new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of chalk whitening complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparing old plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of chalk whitening complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm eachcomplete all as specified and directed by Engineer-in-Charge
Supply & fix anodised powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-Charge.
Supply & fix anodised powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge
Supply & fix 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge.
Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed by Engineer-in-Charge.
Taking down existing water proofing tretment on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and Materia & labour for plaster 10 mm thck on concrete surfaces in cement mortar 1:3 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumenm primer confirm to IS - 3384-1986 @ 3% per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces complete all as specified and directed by Engineer-in-Charge.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants,regulators, sockets etc.incl removing materials to store for kepping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed by Engineer-in-Charge.
Pulling out old sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut complete all as specified and directed by Engineer-in-Charge.
Taking down main switch/DB’s/ AC enclosure including MCB’s with board and fixture of any description and making good disturbed surface of walls etc complete all as specified and directed by Engineer-in-Charge.
Taking down old light fittings of any description and making good disturbed surface of walls etc complete all as specified and directed by Engineer-in-Charge.
Taking down existing split AC upto 2 ton capacity and refixing the same on the existing wall complete all as specified and directed by Engineer-in-Charge.
Taking down smoke sensors and refixing the same in postion after false ceiling work complete all as specified and directed by Engineer-in-Charge.
Taking down L2 switch afer disconnecting the electr connections and refixing the same after alteration on walls complete all as specified and directed by Engineer-in-Charge.
Taking down fire alarm control panel afer disconnecting the electric connections and refixing the same after alteration on walls complete all as specified and directed by Engineer-in-Charge.
Material & labour for point wiring with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade drawn through and including PVC concealed conduit dia not less than 20 mm with all accessories such as brass screws and cup washers including copper earth continuity wire of PVC insulated of size 1.5 Sqmm and making good to the disturbed surface of wall/ceiling etc complete all as specified and directed by Engineer-in-Charge
One light point/fan point controlled by one switch
One 5 pin socket outlet 5 Amps on Same board
One 5 pin socket out let on independent board
All as per item No. 28 above but for 15 Amp independent socket out let with 2.5 Sqmm copper cable complete all as specified and directed by Engineer-in-Charge.
Material & labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provn of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with and PVC surface box of suitable size 3mm thick bakelite white/colour sheet top cover ISI marked with brass screws and cup washers for housing switches, sockets, fan regulator, etc complete all as specified and directed by Engineer-in-Charge for the following :-
One light point controlled by one, one way switch single pole piano type
One 3 pin 5 Amps socket out let on independent board
One 3 pin 5 Amps socket out let on same board
All as per item No 30 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board. complete all as specified and directed by Engineer-in-Charge.
Supply & fix stepped type electronic fan regulators flush type on phelonic existing laminated sheet complete all as specified and directed by Engineer-in-Charge.
Supply & fix switch piano, flush type single pole, one way 5 Amp complete all as specified and directed by Engineer-in-Charge.
Supply & fix switch socket out let 2 in 1 , 5 Amp flush type multi purpose 5 pin ISI marked white or ivory complete all as specified and directed by Engineer-in-Charge.
Supply & fix switch socket outlet multipurpose 3 pin 15 Amp and 3 pin 5 Amp flush type universal controlled by one switch. White or ivory ISI marked complete all as specified and as directed by Engineer-in-charge.
Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 6.0 Sqmm single core, copper conductor drawn through PVC Casing capping and 6.0 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engineer-in-Charge. (Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit)
Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4.0 Sqmm single core, copper conductor drawn through PVC Casing capping and 4.0 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engineer-in-Charge. (Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit)
Supply and fixing recessed LED ceiling tile with wide light window for maximized glare free output suitable for 600x600mm and ceiling cutout 595x595mm modular grid/POP ceiling complete fitting with separate electronic driver and high brightness LEDs 36 W (100 lumens per watt), not less than 5700K including connecting electric connection complete all as specified and directed by Engineer-in-Charge.
Supply & fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp capacity complete all as specified and directed by Engineer-in-Charge.
Material & labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor FRLSH PVC insulated but unsheathed cable 1100 volts grade drawn throughand including rigid steel ERW conduit of 25mm dia (external) heavy duty including necessay flame proof /weather proof conduit accessories and fitting concealed in wall/ceiling etc including sealing threaded jointsin conduit accessories with teflon tape,flame proof sunken type pressed steel terminal boxes with bakelite sheet of approved shade 3.0 mm thick including 1.5 sqmm single core FRLSH PVC insulated but unsheathed multistranded copper conductor cable as in continuous earth.Wiring shall be suitable for flame proof area as per STEC-7 etc complete all as specified and directed by Engineer-in-Chargefor the followings:
One flame proof light/ exhaust fan point controlled by one,single pole flame proof switch
Supply & fix flame proof and weather proof rotary type switch,16 Amps,230 Volts,AC single pole, (LM-6) aluminium alloywith flame proof cable entry glands CMRS certified,ISI marked complete all as specified and directed by Engineer-in-Charge.
Supply and fixing LED light fitting 2X16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.
Supply & fix flameproof exhaust fan, 15" (375mm), single phase,with and including louvers, complete all as specified and directed by Engineer-in-Charge.. Note:-The rate quoated shall be in including making holes of suitable for exhaust fan of size 475 mm dia in PCC block masonry wall, making good the side of hole with CM (1:4) on wall with two coat of paint match with existing wall and distributed surface with 4 nos of stainless steel fastner of suitable size to fit the exhaust fan no extra payment will be allowed to contractor on this regard
Supply & fix MCB distribution board made of sheet metal enclosures double door type (CRCA sheet) dust and vermin proof , SPN 8 way with 200 Amps rated bus bar and copper connector and IP 43 protection, 220 volt , fixed on wall complete all as specified and as directed by Engineer in Charge.
Supply & fix MCB SPN 40 Amps 240 Volt complete all as specified and as directed by Engineer in Charge.
Supply & fix MCB SP 6 to 32 Amp , 230 volts C Curve 10 KA complete all as specified and as directed by Engineer in Charge.
Supply , laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and directed by Engineer-in-Charge.
Supply and fix Voltage stabilizer for automatic operation, three phase, naturally oil cooled, indoor type & designed for input variation between 360 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 30 KVA ccomplete all as specified and directed by Engineer-in-Charge.
Material & labour for earthing complete with galvanised steel plate electrode 600mmx600mmx6.00mm thick burried directly in ground (earth pit not less than 2.25 mtrs deep below normal ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts check nuts and GI washers earth plate surrounded by picked layer of coal dust and common salt 15cm thick all around bottom and top and watering pipe 20mm bore of GI pipe medium bore GI pipe light grade connected to funnel heavy wire mesh for watering purpose and 15mm bore GI pipe light grade for protection of galvanised earth wire from earth plate upto 7.5 metre and connecting to , main switch board including 10mm thick cast iron cover angle iron frame and PCC 1:2:4 type B-I for concrete pit, including necessary excavation and earth works etc , as shown in electrical plate No 3 of SSR Part - I of 1991 and testing on completion all as specified. Note : PCC chamber shall be constructed at least 1.5m away from earth pit pipe for watering shall be provided in slanting manner complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and directed by Engineer-in-Charge.
Material & labour for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed by Engineer-in-Charge.
Supplying and laying un-reinforced precast concrete cable cover class LV, type - 2, flat, size 300x 180 x 40 mm complete all as specified and directed by Engineer-in-Charge.
Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick complete all as specified and directed by Engineer-in-Charge.
Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed by Engineer-in-Charge.
Supply and laying GI tubing 40 mm dia bore light grade laid in trenches / floor / fixing on pole / wall / roof for cable protection/fixed on roof for fixing of sheet with necessary fittings complete all as specified and directed by Engineer-in-charge.
Taking down carefully existing meters from inside the panel box/wall along with disconnecting the incoming supply cable complete all as specified and directed by Engineer-in-charge. (Note:- Old Energy meters deposit in AGE(E/M) store yard) ..
Supply & fix single phase two wire AC static energy (10-60Amps) direct current class 1.0 key pad based pre-payment electronic energy meter with customer interface unit (CIU) and soft token transfer device (STTD), comprising of 1 No. single source pre payment meter + 1 No. CIU without cable + 1No. STTD. with EPP make SMC box with fitting MCB provision complete all as specified and directed by Engineer-in-charge.
Supply & fix meter to CIU cable RJ11 both end, 2 pair shielded cable (1.5 meter length) complete all as specified and directed by Engineer-in-charge. .
Development, supply,installation, testing and commisioning of portal creation, data base creation and training to our staff (administrator, members & vending station operators) on chargeable basis for enabling them to prepare the consumer database, tariff creation, setting of load limit and meter allotment complete all as specified and directed by Engr-in-charge. Note:-The scope of work includes training (at site) for a period of 6 working days to the concered Engineers.
Transaction charges to be paid in advance for recharge transactions @ Rs. 40.00 per meter / month* complete all as specified and directed by Engineer-in-Charge.
Material &labour for sub main wiring with two runs (two runs measured as one run) of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 6 Sqmm single core size copper conductor drawn through and including PVC Cassing Capping with accessories and 6 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI marked earth continuity wire complete all as specified and directed. (Note : Two runs of conductor with one run of earth wire and one run of conduit will be measured and paid as one unit)
Supply & fix MCB SPN of 240 volts 6 to 40 Amps capacity, 'C' series 10 KA in SMC box complete all as specified and directed by Engineer-in-Charge.
Radhe Krishn Engineering
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .