SPECIAL REPAIRS TO BLDG NO. P-760 AT CWE COMPLEX AT AF STN BHUJ

Amount

S&F 18mm thick prelaminated PVC celuka Ply, prelaminated one side with decorative choice lamination and other side plain, fixed with screw to PVC celuka ply works

S&F of magnetic catches for shutters of cupboards, windows & doors

S&F 100 mm size of handle Extruded brass handles fabricated type polished

S & F in repairs auto close hinges, stainless steel, bright finish or electro galvanized fixed complete all as specified

S & F in repairs of drawer stainless steel guide channel 450 to 600 mm complete all as specified & directed.

Taking down existing roof treatment & felt cleaning the surface by hacking to receive plaster and removing demolished material outside MD land etc. complete all as specified and directed.

M&L for PCC 1:2:4 B-0 using 12.5mm graded aggregate as leveling course, finished even and smooth using extra cement all as specified

M&L for rendering 10mm thick in CM (1:3) on concrete roof top and chajjas surface, finished even and smooth to get uniform level surface for laying of membrane treatment with using water proofing compound.

M&L for APP modified roof treatment over existing RCC roof in repairs complete all as specified and as directed by engineer -in-charge and as specified hereunder (a) Applying bitumen primer @ 0.40 lit/sqm with density of 0.87 kg/lit at 25 degree C on the prepared dry roof surface (b) Laying 4mm thick APP membrane including aluminium layer on top, weight not less than 3.50 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorised applicator of manufacturer of APP membrane. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 kg/sqm prescribed by manufacturer including taking down and refixing any electric cables, outlet of AC's without any damage & without any extra cost etc all as specified.

Demolition of unreinforced concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing debris outside MOD land.

M&L for 75 mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finishing even and smooth without using extra cement.

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) including iron mongry and removing from site complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames).

Taking down shutters only of any description exc 1sqm and n exc 2 sqm each

S & F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work all as specified and as directed by Engr-in-Charge

S & F in repairs Double action floor spring Hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S&F in repairs brass mortice lock, vertical type, size 100 mm, 4 levers with 2 keys

S&F Aluminium (extruded section) Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 1000 mm in width and of weight not more than 35 kg and fixed

S & F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, GA, fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality including provision of exhaust fan, etc. complete all as specified and directed. Note: (i) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (ii) Provision for fixing the AC and cooler shall be included in rate quoted by contractor, no payment shall be made on this account and no misunderstanding entertained in later stage. (iii) The unit rate quoted by contractor includes cost of glass, tinted glass in toilets & SS steel wire cloth includes all other connected accessories. Net Opening will be measured for payment purpose.

S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden lapping/fixed in Aluminium section for windows, doors, etc., in square not exc 0.50 Sqm each in each pane all as specified and as directed.

S & F 3 mm thick Figured glass/ tinted glass, ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.50 Sqm each in each pane, lovers etc all as specified and as directed.

S&F Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete, as specified.

S&F Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

S&F 30 mm thick flush shutters, solid core construction, with Block board core and plywood face panels, commercial type on both sides with one face covered with decorative face veneer with lipping/frame to match complete all as directed.

S&F for 35mm thick 2nd class hard wood glazed and skelton shutters divided into squares with plain chamfered or rounded miltred and related sash bars number to receive glass gauze etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats.

M&L for preparation new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamed paint over a coat of pink primer.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

S&F door sliding bolt aldrop 250 mm long aluminium anodized, ISI Marked.

S&F in repair mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F aluminium anodized, 150mm length of bolt barrel tower bolts of extruded section.

S&F aluminium anodized, 75 mm length of bolt barrel tower bolts of extruded section.

M&L for Floor door stopper 150mm long , of brass body and tongue, anodised, with hard drawn steel spring. fixed in floor.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified.

S & F MS butt hinges 100 mm size cold rolled medium weight and fixed as directed and specified.

S & F Aluminium handles cast moulded type 150mm size fixed with screws.

M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing will be painted to match with printed sheed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Demolition of reinforced cement concrete in any position and in any description not otherwise specifically provided complete all as specified and as directed by EIC.

M & L for RCC (1:2:4) 20mm graded stone aggregate as in Slabs supported on walls, Slab for self Perforated drain cover with grip, ramp etc. complete all as specified and as directed by EIC.

M&L for TMT steel bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips in main bar complete

M&L for TMT steel bars 8mm dia cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips in stirrups complete.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, verhangs, etc. also splays between floors and beams etc.

Demolition of brick work or stone/boulder built in lime mortar or cement mortar including all quins, arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articles for portion ordered to be dismantled and removing debris outside MOD land.

M&L for precast solid block masonry 1:3:6 (type C1) straight or curved on plan exc 6m mean radius, exc 10 cm width and set in CM (1:6) etc complete all as specified gradaint camber.

M& L for removal and refixing of file compactor storage system complete.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises

M&L Screed bed or bedding layer or mortar 15mm layer for laying floor finishes in CM 1:6

M&L for light shade vitrified Ceramic tiles lightshade 8 to10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match as approved by Engr-In-Charge.

M&L for light shade vetrified ceramic tiles 8 to 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as approved by Engr-In-Charge.

M&L for rendering 10mm thick in CM 1:3 as backing coat on wall surface including preparation of surfaces to receive dado finished.

M&L for 450 x 300 x 7mm thick glazed coloured ceramic wall files/ digital tiles as in vertical surface and jointed in neat cement slurry and pointed in white or coloured cement to match pattern approved by Enqr-in-Charge

M&L for Non-skid Ceramic Coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match

M & L for Granite (of any type) 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and mirror polishing on floor & Kitchen platform etc complete.

M & L for Machine cut cudappah stone slab 20 to 25 mm thick over cement screed bed , laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and pointing complete.

M & L for rounding the edges of stone slabs one edge, such as in steps, cooking platform and other similar situations

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing etc complete

Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

Taking down cement plaster on brick or stone walls, ceiling etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L for 10 mm thick cement plaster on Brick or concrete surfaces in CM 1:6.

M&L for Preparing new plastered surfaces of wall, applying two coat of oil emulsion distemper over 1 mm thick putty complete all as specified.

M&L for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 in two layer mixed with water proofing compound @ 3% by weight of cement including 10m height steel scaffolding complete. Note:- WPC shall be measured and paid separately

Supply of integral water proofing compound

M & L for 15mm thick polymer modified mortar to load carrying RCC members in two layers in proportion of 1:5:15 by weight of polymer of approved make and quality, cement and quartz sand with required WC ratio for desired consistency and applying and finishing by floating, curing after initial setting time etc. as per manufacturer specification etc. complete all as directed and specified.

M&L for preparing new plaster surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm all as per manufacturer’s instructions and directed including 10m height steel scaffolding complete all as specified by GE/Engineer-in-Charge.

M&L for preparing old plastered surfaces incl scraping of old paint surfaces of walls and applying two coats of oil bound distemper over 1mm thick putty complete all as specified.

M&L for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm all as per manufacturer’s instructions and directed including 10m height steel scaffolding complete all as specified by GE/Engineer-in-Charge.

M&L for preparation of old surfaces plastered or unplastered on old surfaces of ceiling and apply one coat of Oil Emulsion distemper on ceiling complete.

S & F in repairs 25 mm bore Stainless steel heavy duty drapery rod (curtain rod), cut to length and fix in position including decorative type FINIALS (bracket) colored finish, of approved pattern complete

S&F in repairs 15 mm size bib cock (Straight line Model) with wall flange Make Jaguar or equivalent

S & F in repairs 15 mm size pillar taps, cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S & F in repairs 15 mm size wash hand basin mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising single hole bib tap with all connected accessories fixed complete

S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromium plated fancy type, screwed down, high pressure with capstan head, screwed both ends for iron pipe or for union all as specified and as directed.

S&F in repairs 15 mm size stop valve with long shank (concealed type) cast copper alloy, chromium plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron i.e. or for union all as specified and as directed.

S & F in repairs Hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook complete.

S & F in repairs 15mm size 2-way Bib cock with single handle and wall flange. Make Jaguar or equivalent

S & F in repairs Shower rose overhead rain shower SS 100 x 100 m with 200 mm long shower arm and wall flange complete all as specified and as directed by Engr-In-Charge.

S&F vitreous china white Table top wash basin in repairs having size 450mm x 400mm x 160 mm, Rectangle bowl, Snow White in colour, including making hole as per size into the granite cutting etc complete.

S & F in repairs Mirror Cabinet for Washbasin Premium Wait Mounted Storage Cabinet Bathroom with Door Multipurpose Bathroom Cabinet Rack with Mirror (White) size 54D x 35W x 12H Centimeters, Wall Mount , Plastic etc complete all as specified and as directed by Engr-In-Charge.

S & F in repairs 15 mm size wall mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising bib tap with all connected accessories, fixed complete.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and taking down old water closet (in repairs), including making good etc complete.

S & F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete.

S & F in repairs PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

S & F PVC connections 15mm size with PTMT nuts of length 750mm

S & F liquid soap container of PTMT fixed with and incl chromium plated brass screws and wooden

S & F in repairs tubular towel rail, aluminium anodized 20mm dia D type 60 CM long between flanges.

S & F in repairs Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws

S & F 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old ate valve all as specified and as directed.

Taking up or down 20 mm bore steel water tubing including connected fitting, fixture, and disconnection of fitting, fixture etc. from tubing complete.

Re-fixing of 20 mm bore galvanized iron tubing medium grade retrieved from item No 92 here-in-before, after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floors complete.

M & L for 20 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete.

S & F in repairs 32 mm size PVC waste pipe, length 1.20m for wash hand basin / urinal / sink complete.

S & F in repairs 32 mm size PVC waste coupling of PTMT for wash hand basin / urinal / sink complete.

S & F in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm concealed pipe fittings etc complete.

S & F in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm concealed pipe fittings etc complete.

S & F vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, including taking down old wash hand basin complete all as specified and as directed.

S & F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S & F plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and as directed.

S & F polyethylene water tank cover with hinges suitable up to 1000 Ltrs tanks, including taking down old water tank cover all as specified and as directed.

S & F in repairs 6 mm thick corner glass shelf with aluminum / SS railing incl brackets for fixing size 300 mm x 300 mm etc complete.

S & F in repairs 6 mm thick rectangular glass shelf with aluminum / SS railing incl brackets for fixing size 450mm x 150 mm etc complete.

S & F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm to 100 mm dia pipe.

S & F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall.

S & F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall.

S & F PVC SWR bend 75mm bore any radios with access door

S&F PVC SWR 110mm bore branch piece, single (Single ‘Y’) equal or with access door.

S & F in repairs PVC 110mm bore SWR coupler

S&F PVC SWR 110mm bore WC connector with lip type ring.

S&F PVC SWR 110mm bore in mm vent cowl.

S&F PVC (SWR) 75mm diameter out let in mm floor trap, plain with grating including jointing with solvent cement.

S&F PVC SWR 75mm bore branch piece, single (Single 'Y') equal or with access door.

S&F PVC SWR 75mm bore in mm vent cowl

S & Fin repairs PVC (SWR bends 110mm bore an radius

S&F grating doom grating doom 100 mm dia with waste hole of PTMT (Minimum weight 25 gms)

S&F PVC connections for 15mm size with PTMT nuts of length 600mm

M & L PVC SWR gully trap 125/110 mm, setting and jointing with solvent cement

S & F Plate racks Stainless steel wall hung size 0.90 x 1.00 x 0.30m, 1mm thick section.

Removing of existing water tank of capacity 500 lit, refixing the same after completing the water proofing treatment etc as directed by Engr-in-Charge

Removing of existing water tank of capacity 1000 lit and refixing the same after completing the water proofing treatment etc as directed by Enqr-in-Charqe.

Demolition of PVC/RCC Water tank up to capacity 1000 Lts & removal of all retrieved material

S&F 1000 litres, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part complete all as specified and directed by Engineer-in-Charge. (Note : PVC tanks shall be ISI marked.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

Re-securing or easing and adjusting without taking down shutters of any description and size all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in cills, steps, bands, copings, bed plates, blocks for inserting hold fasts etc. and the like including weathering, slightly rounded or chamfered angles and throating as directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M & L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, POP etc) or insulation boards/slabs/blankets, any thickness, including cover fillet.

M&L in repairs for Anodized aluminium snap grid frame work of size (605mm x 605mm) for false ceiling incl taking down any electric wiring, cables and refixing into same without any damage etc complete all as specified

M&L in repairs for Hangers 6mm dia. G.I. (upto 1200 mm length) size of grid (605mm*605mm ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40*3 mm size 60 mm long and expansion hold fasteners 12.50mm dia. 40mm long complete all as specified.

S & F PVC insulation panels 10mm thick with EPS stuck to 1mm printed PVC sheet used in lieu of plain PVC sheet placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing.

M & L for pointing, to squared rubble, coursed or uncoursed in CM 1:4 complete

M & L for preparing wall on old surface by applying two coats of cement based Paint as approved complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for taking down the existing U/S wires of any type from concealed wiring carefully of aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete and all as directed by EIC

M&L for taking down sub main wiring only any size of aluminium conductor cable PVC insulated with or without conduit all as directed.

M&L for taking down main switch/DB's including MCB's with board and fixture of any description and making good disturbed surface of walls etc complete.

M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through Casing caping including provn of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with new plastic laminated white coloured top sheet cover 3.0 mm thick on existing sunken box complete as specified and directed for One light point controlled by one, one way switch

All as per item No.141 above but for One Fan point controlled by one, one way switch

All as per item No.141 above but for One 3 pin 5 Amp socket outlet on the same board

All as per item No.141 above but for One 3 pin 5 Amps socket out let on independent board

All as per item No.141 above but for One bell point controlled by one bell push

All as per item No.141 above but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

S&F modular Plastic flush box of module 1/2 flush ISI marked.

All as per item No 147 but of 3 module

All as per item No 147 but of 4 module

All as per item No 147 but of 6 module

All as per item No 147 but of 8 module

All as per item No 147 but of 12 module

S&F modular white cover plate with frame of module 1 flush ISI marked.

All as per item No 153 but of 3 module

All as per item No 153 but of 4 module

All as per item No 153 but of 6 module

All as per item No 153 but of 8 module

All as per item No 153 but of 12 module

S&F modular blank plate module 1 all as specified and directed.

M&L for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through casing capping ISI marked with accessories and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed. Note: Two runs of conductor for Phase with one run of neutral and one Run for earth wire and PVC Conduit/casing capping will be measured & paid as one unit.

M&L for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 2.5 Sqmm single core, copper conductor drawn through casing capping ISI marked with accessories and 2.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed. Note: Two runs of conductor for Phase with one run of neutral and one Run for earth wire and PVC Conduit/casing capping will be measured & paid as one unit.

S&F in Replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated all as specified.

S&F in replacement of isolators, MCBs, etc. In distribution board of size MCB TPN 415 volts 63 Amps, 30 mA Capacity ‘B’ series.

S&F in replacement of isolators, MCBs, etc. In distribution board of size MCB SPN of 240 volts 40 Amps Capacity, ‘C’ series, 10 KA

S&F in replacement of isolators, MCBs, etc. In distribution board of size MCB SP of 240 volts 5-32 Amps Capacity, ‘C’ series, 10 KA

S&F in replacement, modular switch flush type, 6 Amp, SP, one way,1 module all as directed & specified.

S&F in replacement modular socket outlet, 3 pin, 6 Amp, flush type 2 module all as directed & specified.

S&F in replacement modular switch, 16 Amp flush type 1 module all as directed & specified.

S&F in replacement modular socket outlet, 3 pin, 6/16 Amp flush type 2 module all as directed & specified.

S&F in replacement modular bell push, flush type, 6 Amp,1 module all as directed & specified.

S&F in replacement bell, AC, 230 V, SP, multi music type all as directed & specified.

S&F in replacement of ceiling fan regulator 120 Watt 2 module Modular Type electronic step type 5 step 360 deg Havells or equivalent make of Anchor, Polycab/ Havells all as specified and directed by Engineer-in-Charge.

S&F in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

S&F in replacement of Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified.

S & F in replacement energy saving, environment friendly, long life, corrosion resistant, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 25 W light source all as per Havells or equivalent in Orient/ Philips/ Bajaj/ Crompton/ Polycab including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers all as specified and directed by Engineer-in-Charge.

S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Note:- old ceiling fan shall be deposited in MES store yard by the contractor.

S & F in replacement of metal body exhaust fan, AC single phase 230/240V of size 300 mm sweep with net frame including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge. (Note: Old unserviceable Exhaust Fan will be deposited in MES store yard)

S & F in replacement recessed mounting LED 2 x 2 luminaries with white acrylic flat light dissipater with LED light source of 34/36 Watt of size 2'x2' (Feet) square shape suitable for False/POP ceiling including cutting the existing POP ceiling and fixing complete all as specified and as directed by Engr-In-Charge. Make:- Havells or equivalent in equivalent in Bajaj/ Philips/CG/Orient/Polycab.

Khodiyar Construction (BID ID -3500741)

SHREE BHANU ENTERPRISE (BID ID -3500902)