Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹99.0 LAdmitted-Finance | ₹99.0 L | L1 | Admitted-Finance |
| 2 | L2₹1.1 CrAdmitted-Finance | ₹1.1 Cr | L2 | Admitted-Finance |
| 3 | L3₹1.1 CrAdmitted-Finance 1 242 MAIN ROAD SHREERAM TUMSAR BHANDARA MAHARASHTRA 441912 | BHANDARA | MAHARASHTRA | 441912 | ₹1.1 Cr | L3 | Admitted-Finance |
| 4 | L4₹1.1 CrAdmitted-Finance NAYA BASS MAHAMANDIR JODHPUR RAJASTHAN 342006 | JODHPUR | JODHPUR | RAJASTHAN | 342006 | ₹1.1 Cr | L4 | Admitted-Finance |
| 5 | L5₹1.5 CrAdmitted-Finance | ₹1.5 Cr | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | tulsani associates L2 | Anil Builders L4 | M/s Kirti Enterprises L3 | NEW GURBINDER INDUSTRIES L1 | SANJAY B SHARMA L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | M & L for Preparing of old black top surface with brushing for removing caked mud etc.sweeping with brooms/Compressor Air and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc filling of voids with specially designed paste and applying Polymer Modified Emuslion (PME - RW) -Rejuvenator mopping of total cold liquid undiluted PME (quantity as per trial batch) in two coats with minerals (1/8 Part of PME by weight) as recommended by manufacurer of PME (after diluting with water) ,each coat diluted in the ratio (1:1) (PME:Water) and ensure uniform finish of runway complete all as per manufactures instruction and all as specified and as directed by Engineer-in-Charge. Note:- (i) PME will be Measured and Paid separately under appropriate Item as 'Supply only'. (ii) Quoted rate shall include for all other materails components required if any. (quantity of minerals will be 1/8 part of PME by weight and no deviation shall be allowed for the same. Quoted rates are deemed to be included for the same) | 54,000 | Square metre | 27 ₹14.6 L | 30 ₹16.2 L | 46 ₹24.8 L | 23.6 ₹12.7 L | 22.19 ₹12.0 L |
| 1.01(a) Applicator: The work shall be carried out through authorized and qualified applicator of the manufacturer only. In Case of non-availability of applicators, the approval will be obtained from E-in-C's Branch. PME Shall be manufacured by M/s L N Petro Chem Private limited (EMULCOTE), M/s Hindustan Colas Pvt Ltd (HINMAT PLUS-PME) or M/s Ooms Polymer Modified Bitumen Pvt Ltd or any other make approved by E-in-C's Branch. (b) Mechanical Spraying: Application of PME -PME should be carried out mechanically to ensure homogenous mixture of PME and mineral filler and uniform application. (c) Warranty: Two years warranty of materials performance and application performance to be obtained from authorized manufacturer of PME. Warranty will include the fact that structure remainwater tight and no further cracks will be formed,excludingdamaged caused by natural calamities. A performance certificate for two years shall be submitted by contracator to GE on completion of work as specified. (d) Time Schdule: The commencement and completion of work shall be within the preiod as per site availability and users directives and the Contractor shall adhere strictly to the time lines by complying for all emergency requirements as per direction of users and complete the work satisfactorily in all respects within the specified period. (e) Covering old Runway Marking: To cover/prevent the old Runway Marking while applying PME Application. (f) Trial Patch: Any number of trial patches of dimesnsision 15 m x 15 m at selected place for application of PME as directed by GE will be undertaken before commencment of treatment and cost for the same deemed to be included in rates quoted for above item. On approval of trial patch the by GE, Contractor shall immediately procure the total qty of material required as per trial patch consumption as directed by GE and also submit PVs and test reports before commencement of work. (g) Penetration value and Setting Time: PME must have penetration value 10-20 mmand Initial setting time four to five hours but not more than eight hours. (h) Friction Test: Contractor will make necessary aarangment for procurement of Poratable Skid Resistance tester (PSTR) and carry out necessary friction parameter as directed without any extra cost to the department.Friction parameter shall be between 0.35 to 0.60 after application of PME. (j) Filling Cracks: Care shall be taken to fill gaps/cracks upto 5mm size with mineral filer as per manufacture instructions. | ||||||||
| 2.00 | Supply only Polymer Modified Emulsion in 200/220 Ltr drums. Makes: M/s L N Petro Chem Private limited (EMULCOTE), M/s Hindustan Colas Pvt Ltd (HINMAT PLUS-PME), M/s Ooms Polymer Modified Bitumen Pvt Ltd. or any other make specified here-in-after. | 54,000 | Per Litre | 153 ₹82.6 L | 157 ₹84.8 L | 136 ₹73.4 L | 148 ₹79.9 L | 250 ₹1.4 Cr |
| 3.00 | M & L for preparation of old bitumen surfaces on flexible portion of Runway by brushing, washing, rubbing by gunny bags, cleaning with scrappers or scrapping papers, brooming & fanning over 10cm width or girth of any description and applying two coat of Acrylic water based road marking paint of any tint or colour (white/ Golden yellow etc.) on lines, dashes arrows, letters etc complete all as directed by Engr-in-Charge. Make: Reliance/ Asian/ Berger/ Nerolac/ STP Ltd./Johnson & Nocholson/ Dulux / any other make specified here-in-after. | 6,991 | Square metre | 117 ₹8.2 L | 80 ₹5.6 L | 118 ₹8.2 L | 90 ₹6.3 L | 43.17 ₹3.0 L |
Updated dates
Tender Value
₹1.2 Cr
EMD Value
₹1.9 L
Closing Date
19 May 2026, 6:00 pmClosed
CWE (AF) BHUJ
CWE (AF) BHUJ KHAVDA ROAD BHUJ KACHCHH PIN 370001
APPLICATION OF POLYMER MODIFIED EMULSION (PME) ON RUNWAY SURFACE AT AF STN BHUJ
2026_MES_759878_1
84269/E8
Open Tender
Civil Works - Roads
120 days
BHUJ
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE (AF) BHUJ
₹1.9 L
Yes
3 Jun 2026
10 Apr 2026
22 May 2026
10 Apr 2026
19 May 2026
5 May 2026
Supply only Polymer Modified Emulsion in 200/220 Ltr drums. Makes: M/s L N Petro Chem Private limited (EMULCOTE), M/s Hindustan Colas Pvt Ltd (HINMAT PLUS-PME), M/s Ooms Polymer Modified Bitumen Pvt Ltd. or any other make specified here-in-after.
M & L for preparation of old bitumen surfaces on flexible portion of Runway by brushing, washing, rubbing by gunny bags, cleaning with scrappers or scrapping papers, brooming & fanning over 10cm width or girth of any description and applying two coat of Acrylic water based road marking paint of any tint or colour (white/ Golden yellow etc.) on lines, dashes arrows, letters etc complete all as directed by Engr-in-Charge. Make: Reliance/ Asian/ Berger/ Nerolac/ STP Ltd./Johnson & Nocholson/ Dulux / any other make specified here-in-after.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
TENDER84269.pdf
Tender Documents • 1.69 MB
BOQ_851127.xls
BOQ • 1.18 MB
Download all tender documents and submit your bid