Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹4.7 Cr
EMD Value
₹9.4 L
Closing Date
3 Nov 2026, 3:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
WEST
14 conditions · 2 needing a document upload
Financial Eligibility Criteria as per Clause 10.2 of Part-I of IRSGCC-2022 and ACS No.1 dt 14.07.22: The tenderer must have minimum average annual contractual turnover of 'V/N' Or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees; N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: as per Clause 10.1 of Part-I of IRSGCC-2022 (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Note for Item 10.1 of IRSGCC-2022: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/ registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- C-2: Any Civil Engineering Works (excluding Track works/Zonal works).
17 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person to the official nominated (i.e.OS/Tenders/Engg/GNT Division)before closing date for submission of bids.(i.e., excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-)15% (Minus Fifteen Percent) on CPWD DSR rates. Tenderer should note this before quoting the rates.
SW-I: Replacement of old dilapidated Staff Quarters Ty-II (9 units) and Ty-III (2 units) at Nandyal Station.SW-II:Proposed Construction of Type-IV quarters (1 unit) for SSE/P.Way at Giddaluru station.
05-DRM-W-GNT-Tid-12~SCOR
05-DRM-W-GNT-Tid-12
Open
Works - General
12 Months
Guntur, Andhra Pradesh
₹0
₹9.4 L
6 Oct 2026
6 Oct 2026
20 Oct 2026
145 items across 4 schedules · ₹5,49,44,121.74 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Beyond 5 km upto 10 km per km | cum- km | 6050 | 23.16 | 1,40,118 |
| 2 | Beyond 10 km upto 20 km per km | cum- km | 10300 | 18.85 | 1,94,155 |
| 3 | Beyond 20 km per addl. km | cum- km | 30900 | 15.17 | 4,68,753 |
| 4 | All kinds of soil | cum | 1500 | 177.5 | 2,66,250 |
| 5 | Hard rock (blasting prohibited) | cum | 126 | 1,432.95 | 1,80,551.7 |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 1410 | 196 | 2,76,360 |
| 7 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 1210 | 700.5 | 8,47,605 |
| 8 | All kinds of soil | cum | 470 | 126.8 | 59,596 |
| 9 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 252 | 2,123.75 | 5,35,185 |
| 10 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 625 | 17.6 | 11,000 |
| 11 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 48 | 7,878.5 | 3,78,168 |
| 12 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 90 | 7,780.3 | 7,00,227 |
| 13 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 190 | 7,178.75 | 13,63,962.5 |
| 14 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) | Sqm | 1490 | 410.85 | 6,12,166.5 |
| 15 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | per bag of 50 kg cement used | 2000 | 18.15 | 36,300 |
| 16 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 390 | 392.15 | 1,52,938.5 |
| 17 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 1545 | 927.25 | 14,32,601.25 |
| 18 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 1250 | 736.4 | 9,20,500 |
| 19 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 1210 | 961.3 | 11,63,173 |
| 20 | Stairs, (excluding landings) except spiral- staircases | Sqm | 40 | 764.95 | 30,598 |
| 21 | Under 20 cm wide | Metre | 740 | 208.55 | 1,54,327 |
| 22 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 46 | 951.1 | 43,750.6 |
| 23 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 5.5 | 14,325.95 | 78,792.73 |
| 24 | Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 7 | 20,355.8 | 1,42,490.6 |
| 25 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 350 | 9,655.7 | 33,79,495 |
| 26 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 413 | 10,011.35 | 41,34,687.55 |
| 27 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 114.95 | 733.5 | 84,315.83 |
| 28 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 6.5 | 6,504.9 | 42,281.85 |
| 29 | Cement mortar 1:6 (1 cement : 6 Coarse sand) | cum | 400 | 8,752.55 | 35,01,020 |
| 30 | Cement Mortar 1:4 ( 1 cement : 4 coarse sand) | cum | 30 | 7,197.75 | 2,15,932.5 |
| 31 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) | Sqm | 1195 | 1,105.8 | 13,21,431 |
| 32 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 139 | 8,198.55 | 11,39,598.45 |
| 33 | Area of slab over 0.50 sqm | Sqm | 87.5 | 5,136.3 | 4,49,426.25 |
| 34 | Granite work | Metre | 60 | 510.95 | 30,657 |
| 35 | Each | 13 | 978.7 | 12,723.1 | |
| 36 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 360 | 1,267.95 | 4,56,462 |
| 37 | Second class teak wood | cum | 2.35 | 1,42,949.7 | 3,35,931.8 |
| 38 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | 70 | 2,241.8 | 1,56,926 |
| 39 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 130 | 3,473.85 | 4,51,600.5 |
| 40 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 45 | 3,167.95 | 1,42,557.75 |
| 41 | 125x64x1.90 mm | Each | 660 | 118.2 | 78,012 |
| 42 | 125x85x5.5 mm (heavy type) | Each | 270 | 268.65 | 72,535.5 |
| 43 | 150x10 mm | Each | 338 | 287.25 | 97,090.5 |
| 44 | 300x16x5 mm | Each | 180 | 322.2 | 57,996 |
| 45 | 125 mm | Each | 338 | 256.65 | 86,747.7 |
| 46 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. | Each | 520 | 151.05 | 78,546 |
| 47 | 100 mm | Each | 520 | 206.25 | 1,07,250 |
| 48 | Double strip (horizontal type) | Each | 440 | 39.7 | 17,468 |
| 49 | Second class teak wood | Sqm | 101 | 4,692.1 | 4,73,902.1 |
| 50 | Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). | Sqm | 109 | 10,993.55 | 11,98,296.95 |
| 51 | Using R1 series with frame (33mm & above ) x (35mm & above) & mullion (33mm & above) x (50mm & above). (Height upto 0.90 meter) | Sqm | 15.7 | 9,155.2 | 1,43,736.64 |
| 52 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. | Each | 330 | 272 | 89,760 |
| 53 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. | ONE SET | 55 | 885.1 | 48,680.5 |
| 54 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. | Each | 51 | 226 | 11,526 |
| 55 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 500 | 614.2 | 3,07,100 |
| 56 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 82 | 1,112.7 | 91,241.4 |
| 57 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | Sqm | 310 | 1,330 | 4,12,300 |
| 58 | Size of Tile 600x600 mm | Sqm | 640 | 1,553.45 | 9,94,208 |
| 59 | Size of Tile 600 x 600 mm | Sqm | 265 | 1,464.85 | 3,88,185.25 |
| 60 | Size of Tile 600x600 mm | Sqm | 65 | 1,623.05 | 1,05,498.25 |
| 61 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 410 | 3,186.7 | 13,06,547 |
| 62 | Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red | Sqm | 90 | 3,071.05 | 2,76,394.5 |
| 63 | 110 mm diameter | Metre | 90 | 377.4 | 33,966 |
| 64 | 110x110x110 mm | Each | 8 | 234.15 | 1,873.2 |
| 65 | 110 mm bend | Each | 30 | 150.35 | 4,510.5 |
| 66 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) | Sqm | 545 | 1,355.8 | 7,38,911 |
| 67 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 370 | 738.65 | 2,73,300.5 |
| 68 | 1:6 (1 cement: 6 fine sand) | Sqm | 910 | 333.35 | 3,03,348.5 |
| 69 | 1:6 (1 cement: 6 fine sand) | Sqm | 3115 | 383 | 11,93,045 |
| 70 | 1:6 (1 cement: 6 fine sand) | Sqm | 1720 | 450 | 7,74,000 |
| 71 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 5450 | 160.6 | 8,75,270 |
| 72 | Two or more coats on new work | Sqm | 600 | 155.9 | 93,540 |
| 73 | Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish | Sqm | 150 | 236.1 | 35,415 |
| 74 | Two or more coats glue sizing with spar varnish or an under coat of flatting varnish | Sqm | 5 | 236.9 | 1,184.5 |
| 75 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 4320 | 156.05 | 6,74,136 |
| 76 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete | Each | 60 | 271.45 | 16,287 |
| 77 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 100 | 263.95 | 26,395 |
| 78 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 26 | 6,515.55 | 1,69,404.3 |
| 79 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. | Each | 5 | 1,550.6 | 7,753 |
| 80 | 510x1040 mm bowl depth 250 mm | Each | 13 | 6,945.6 | 90,292.8 |
| 81 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality and make as approved by Engineer in charge.(a) 15 mm nominal dia | Each | 26 | 6,940.75 | 1,80,459.5 |
| 82 | 32 mm dia | Each | 72 | 119.55 | 8,607.6 |
| 83 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 88 | 1,607.95 | 1,41,499.6 |
| 84 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 72 | 708.95 | 51,044.4 |
| 85 | 25 mm nominal dia Pipes | Metre | 380 | 401.55 | 1,52,589 |
| 86 | 32 mm nominal dia Pipes | Metre | 270 | 518.75 | 1,40,062.5 |
| 87 | 50 mm nominal dia Pipes | Metre | 130 | 934.15 | 1,21,439.5 |
| 88 | 20 mm nominal dia Pipes | Metre | 315 | 537.6 | 1,69,344 |
| 89 | 25 mm nominal dia Pipes | Metre | 295 | 627.25 | 1,85,038.75 |
| 90 | 50 mm dia nominal bore | Metre | 500 | 762.15 | 3,81,075 |
| 91 | 50 to 80 mm nominal bore | Each | 16 | 1,785.35 | 28,565.6 |
| 92 | 25 mm nominal bore | Each | 48 | 622.4 | 29,875.2 |
| 93 | 32 mm nominal bore. | Each | 11 | 689.6 | 7,585.6 |
| 94 | 50 mm nominal bore | Each | 11 | 1,026.65 | 11,293.15 |
| 95 | 25 mm nominal bore | Each | 24 | 464.05 | 11,137.2 |
| 96 | 150 mm diameter | Each | 26 | 222.35 | 5,781.1 |
| 97 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 11000 | 11 | 1,21,000 |
| 98 | 80 mm dia nominal bore | Each | 2 | 3,627.65 | 7,255.3 |
| 99 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 22 | 111.45 | 2,451.9 |
| 100 | Rectangular shape 600x450 mm internal dimensions | Each | 15 | 1,437.65 | 21,564.75 |
| 101 | Square shape 450 mm internal dimensions | Each | 16 | 1,155.45 | 18,487.2 |
| 102 | 300 mm dia | Metre | 100 | 707.75 | 70,775 |
| 103 | 300 mm dia | Metre | 50 | 825.7 | 41,285 |
| 104 | 150 mm nominal size dia | Metre | 50 | 793.25 | 39,662.5 |
| 105 | Frame size 45 x 70 mm | Metre | 124.52 | 705.85 | 87,892.44 |
| 106 | Frame size 65 x 100 mm | Metre | 132 | 1,111.3 | 1,46,691.6 |
| 107 | 30 mm thick | Sqm | 16 | 4,764.2 | 76,227.2 |
| 108 | 18 mm thick | Sqm | 1130 | 2,992.9 | 33,81,977 |
| Schedule total | ₹4,34,40,938.14 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecialConditionsofworks2026.pdf
ATTACHMENT
RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf List of Approved Brands
ATTACHMENT
SiteRecordstobemaintainedport3.pdf
ATTACHMENT
DesignMixOnsitelabandTestingofMaterials-Comp.pdf
ATTACHMENT
Tid-10-11-MTD-01uptoACS-11dt17.09.26.pdf
ATTACHMENT
Tid-11-MTD-02uptoACS-12dt17.09.2026.pdf
ATTACHMENT
GCC_April-2022_2022ACS1to12.pdf
ATTACHMENT
RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .