REPAIRS/ REPLACEMENT AND CLEANING OF SERVICE TANKS AND PLUMBING AND OTHER MISC ITEMS IN TECHNICAL AREA AF STN BHUJ

Amount

Taking up or down following size of steel tubing and connections including removal to store for reuse or credit to contractor Note : (a) The rates apply to pipes above or below ground only in repairs and alterations. (b) 'The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing, where required.

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

S&F CPVC pipes ISI marked with all fittings fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes: (SDR-13.5 of plain CPVC)

20mm nominal dia of pipes

25mm nominal dia of pipes

32mm nominal dia of pipes

S&F tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors of following size :-

15mm bore

20mm bore

25mm bore of pipe

Refixing following size of old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.( Note : The rates include for cleaning or rerunning the old screw threads as required)

15mm bore

20mm bore

25mm bore of pipe

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of following sizes

20mm dia bore

25mm dia bore

Supply and fixing in repair Rotational moulded polythelene water storage tank, three layered, ISI marked, cylindrical vertical with closed top including dismantling existing water tank and removingto store of following capacity Complete all as pecified : -

1000 litres capacity

750 litres capacity

500 litres capacity

S&F in repairs 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) Complete all as specified.

S&F in repairs 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) Complete all as specified.

Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity exc. 250 liters and n.exc. 500 ltrs including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks complete all as specified.

All as per item no 26 above but of capacity exc 500 liters and n.exc. 1000 liters

All as per item no 26 above but of capacity exc 1000 liters and n.exc. 2000 liters

Supply and fixing in repairs tank top cover (lid) white of make : Sintex suitable for any size/capacity including provision for providing brackets with nut and bolts as required for fixing of lids all as specified and directed.

S & F in repairs Bib taps, cast copper alloy with cruty or butter fly handle, screwed down, screwed down, srewed for iron pipe or for brass ferrule an fixed for size 15mm bore,

S & F in repairs stop valve 15mm dia cast chromium plated screwed down high pressure with long shunk screwed end for iron pipe or for unions complete all as specified and directed

S&F in repairs vitreous china wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets.

S&Fin repair pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed.

S&F in repair of waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed

S&F in repairs soap dish any type fixed to plugs with chromium plated brass screws.

S&F in repair Vitrious china squattin pan ,Orrissa Paattern Size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe)

S&F in repair cast iron 'P' or 'S' traps 100 mm bore of pipe.

S/F in repair grating square 150mm size of PTMT (minimum weight 100 gms )

S&F in repairs PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, bll valve, flaot and handle including brackets of 10 Ltr capacity.

M&L for PVC (SWR ) gully trap 125/110mm, setting and jointing with solvent cement .all as directed by Engr-in-charge

M&L for 75mm dia cast iron floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4 )

Demolition of cement concrete any description any thickness any position not otherwise specified and directed

M&L for cement concrete 100 mm type D2 1:4:8 using 40mm graded aggregate as in hardstanding including nesseccery form work complete all as specified.

M&L for cement concrete 100mm type B1 1:2:4 using 20mm graded aggregate as in hardstanding including nesseccery form work complete all as specified.

M&L for forming dummy joints 65 mm deep X 10 mm wide filled with sealing compound grade 'B'

Taking down cement plaster on brick, PCC block or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing rubbish outside MD land complete all as specified and as directed.

M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces.

M&L for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement as specified.

M&L for new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment on ceiling surfaces and applying two coats of white wash by finishing the surfaces even and smooth complete all as specified and directed by EIC.

M&L for new plaster surface wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted including one coat of wall care Putty by finishing the surfaces even and smooth complete all as specified and directed by EIC.

Complete removal of existing treatment on wall surfaces and applying two coats of distemperwith distemper oil emuision, white or tinted including one coat of wall care putty by finishing the surfaces even and smooth complete all as specified and directed by EIC.

M&L for rendering 15mm thick in cement sand mortar 1:4 on fair faces of brick work, PCC block masonry or concrete surfaces, mixed with water proofing compound as per manufacturer's instructions. (Note:- Supply only Integral water proofing compound will be measured and paid seperately)

Supply only integral water proofing compound.

M&L for preparation of new or previously untreated concrete or PCC block masonry external surfaces and applying two coats of exterior emulsion paint (in camouflage pattern as approved by the GE) over a coat of primer all as specified and directed by EIC using any one of following material :- Make Brand Nerolac Suraksha Asian ACE Berger Walmasta

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified.

All as per Ser Item No 58 above but in vertical surfaces such as dado, skirtingand riser etc all as directed by the EIC. (NOTE:- Backing coat of CM (1:4) paid seperatelly)

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified.

Glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified.(NOTE:- Backing coat of CM (1:4) paid seperatelly)

M&L for 10 mm thick rendering on vertical surfaces in cement mortar 1:4 as backing coat complete.

M & L Chequered cement concrete tiles 30cm x 30cmx 20-25 mm thick, machine pressed; set pointed in neat cement slurry in floors, with grey cement and pigments and cut and polished incl screed bed or bedding layer of mortar 15 mm thick in CM 1:4 complete all as specified and directed

Taking down existing water proofing tretment on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and M&L for plaster 10 mm thck on concrete surfaces in cement mortar 1:3 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumenm primer confirm to IS - 3384-1986 @ 3% per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces all as specified and directed by Engr-In- Charge

S&F in repair Sensor Urinal Range including fittings excluding taps and porcealon stopper but incl brackets cutting for pinning in ends of brackets or erecting stand but exclusive of fixing and supply

S&F in repair Niagara coupled closet with flushing cistern and anti microbial seat cover with all fittings complete Make-Parriware or euivalant series in Jaguar/Hindware/Cera)

S&F in rapair CP Hand shower (Health Faucet) with 1M Flexible tube with 8mm dia wall hook with NRV (Back flow preventor) Make : Jaquar or equivalent in Parryware, Cera

S&F in repairs Urinal range new magnum half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe , gratings and uinoin for discharge pipe (Exclsuve of fixing supply pipe to flushing cistern , trap and waste pipe) Make Parry ware or equivalent.

S&F in repair CP Urinal spreader for fixing with 15 mm dia pipe complete all as directed

S&F in repair of Auto closing concealed urinal flush valve of 15mm dia pipe complete all as directed . Make Cat No PRS-073 of Jaguar or equivalent in Parryware,Cera

S&F in repair Towel Ring round Make: (Make : CAT Part No-ACN-1121BN of Jaguar series or equivalent make of hindware / parryware/Cera.

S&F in repair Towel rail 24" long for wash basin Make: (Make : Jaguar series or equivalent make of hindware / parryware.

S&F in repair 6mm thick frame less bevelled edge mirror fixed with steel stud as per direction of Engineeer in -charge .

S&F in repair CP Soap dish Make :Jaguar or equivalent make of Parriware /Hindware

S&F in repair glass self assembly(Make : Jaguar series or equivalent make of Parriware /Hindware

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 sqm

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge

S&F100mm size of hinges butt hinges, medium weight, cold rolled mild steel.

S&F 150mm size extruded aluminium alloy handles, fabricated type.

S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section.

Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Repairing/Taking down Aluminium window/doors of any description area exc 1.00 Sqm and n exc 2.00 sqm repairing/retightening of screws, aluminium clips and securing top & bottom rails using MS 10 mm bar having both sides threading incl bolting, fixing of new rubber padding, aluminium snap bidding, glazing clips and re-fixing reassuring in same opening completed all specified and as directed by Engineer-in-Charge.

All as per Item no 83.00 above but area n exc 1.00 sqm

Hacking out old broken glass (any thickness, size, quality or description) from wooden /steel frames or stone , concrete or brick surrounds, glazed with putty or fixed with beads.

S&F 4.00 mm thick sheet figured glass pin headed type and glazing with oil putty in square n exc 0.50 Sqm in each pane.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm .

SHREE BHANU ENTERPRISE

M/s Bombay Novelty Stores

M/s Pal Builders