REPAIRS TO PLUMBING SANITARY FITTINGS JOINERY WELCOME MAINTENANCE AND MISC WORKS OF CERTAIN BLDGS AT AF STN BHUJ

Amount

Demolition of Precast concrete block walling built in cement mortar

M&L for Precast cement concrete block masonary with solid blocks exc 10cm in width Type C1 (1:3:6) 20mm graded and setting in cement mortar 1:6 all as specified and directed

Preparation of old treated surfaces of wall including brooming down, scrapping down smoke soots etc. and appying one coat of white wash, complete all as specified and as directed.

All as per Item No 1 above but on ceiling.

Preparation of old treated surfaces on wall surfaces and applying one coat of distemper complete all as specified and as directed.

All as per Item No 3 above but on ceiling.

Complete removal of existing treatment on old treated surfaces applying two coat of distemper over a coat of birla putty all as specified and directed

Preparation of old wooden painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land.

Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame).

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm

S&F 125x60 mm, 1.25 mm thick pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified including filling in frames with cement concrete type B0, 1:2:4 ( Using 12.5 mm graded stone aggegate) complete all as specified and directed.

S&F 105x60 mm, 1.25 mm thick pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified including filling in frames with cement concrete type B0, 1:2:4 ( Using 12.5 mm graded stone aggegate) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.

S&F PVC door PDS-01 comprising of shutter and frame of Make : Rajshree/Accura Polytech Pvt Ltd (Accucel) all as shown on drg No.CEAA/TD/149 sheet No. 1/1 (PVC RIGID FOAM) , door frame/ chowkats of solid rigid foam profile FP-6030 and shutter of solid PVC foam profile FP 7114 with 4 mm thick high pressure compact laminate as infill (Panel) including necessary hardeware fittings all as specified and directed by EIC.

S&F 35mm thick 2nd class hard wood factory made plain framed, paneled shutters (any number of panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veveered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated..

S&F 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/ Gauge etc. Size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) complete.

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih SS wire staples.

M&L for preparing new or previously untreated surfaces wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on wooden surface

S&F for 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy all as specified and directed.

S&F for 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed.

S&F for aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size all as specified and directed.

S&F for aluminium, anodised 100mm size of hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S&F for mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately. Note : main section of aluminium shall be used 100mmx45MM with same thickness as mentioned in lieu of drg 65mm x 38mm above reffered due to less space available for fixing wire gauge shutter fixing grill

M&L for aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 4.4 mm x 7mm

M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etc.

M&L for glazed digital ceramic coloured tiles Ist quality in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and icluding plaster in CM 1:4 all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (sqaure/rectangular) area of each tiles exc. 0.06Sqm but n.exc. 0.11Sqm as per IS - 13755 in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed 15mm thick in cement mortar 1:6 complete as directed by EIC.

M&L vitrified ceramic dark shade 10 mm thick (sqaure/rectangular) area of each tiles n.exc. 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing tiles and including 15 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes complete.

M&L vetrified ceramic tiles in vertical surfaces 600 x 200 x 10 mm thick set and jointed in neat cement slurry and pointed in colour cement to match existing tiles and inluding rendering 10 mm thick in cement mortar 1:4 on concrete surfaces as backing coat complete.

M&L in repairs for 20mm thick granite, Z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded.

Taking up on down steel tubing and connection incl cleaning for refining of the following bore of pipe

a) 15mm bore of pipe

b) 20mm bore of pipe

c) 25/32mm bore of pipe

S&F CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes: (SDR-13.5 of Make : Astral or equivalent of Supreme / Finolex)

20mm nominal dia of pipes

25mm nominal dia of pipes

32mm nominal dia of pipes

S&F in repair grating doom 125mm dia with waste hole of PTMT (minimum weight 40 grams)

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm.

Dismantling of cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge following bore of pipe

100/110mm dia of pipes

75mm dia of pipe

S&F of UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors of following size :- (Make : Astral type 'B' pipes or equivalent)

110mm dia of pipe

75mm dia of pipe

S&F of UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement of following sizes :- (Make : Astral type 'B' pipes or equivalent)

110mm dia of pipe

75mm dia of pipe

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls of following size : -

a) 75mm bore

b) 110mm bore

S&F PVC (SWR) bends any radius of following sizes :-

a) 75mm bore

b) 110mm bore

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement with 75mm outlet dia.

S&F PVC (HDPE) pipe of 32mm dia with all fittings and fixed complete to walls and ceiling or laid in floors including taking down of old pipes. Make : Astal

S&F in repairs Hand health Faucet spray to EWC with PVC nozzle, and PVC flexible pipe etc complete.

S&F in repairs bathroom cabinet PVC frame box type with mirror in front of size 350x450mm with 6 m thick glass fixed to wall with screws complete all as specified and directed by Engineer-in-Charge.Make : Prayag(Cat No :551) or equivalent as approved by GE

S&F in repair bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia of piep. Make : Jaquar, Cat No QQT-7037 or equivalent as approved by GE.

S&F in repairs Angular stop cock with adjustable wall flange, cast coper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe. Make : Jaquar, Cat No - QQT-7053 or equivalent as approved by GE.

S&F in repairs chromium plated mixing valve, wall mixer 3 in 1 system with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe including three joints to steel pipe or unions. Make : Jaquar, Cat No QQT-7281 or equivalent as approved by GE.

S&F in repairs chromium plated mixing valve (central hole basin mixer) with small spout without popup waste system with 450mm long braided hoses including three joints to steel pipe or unions. Make : Jaquar, Cat No - QQT-7167B or equivalent as approved by GE.

S&F in repairs chromium plated shower rose overhead single flow 100mm dia (ABS chrome plated) without Arm including fixed to steel pipes or union and complete all as specified. Make: Jaquar, Cat No - OHS-1989 or equivalent as approved by GE.

S&F in repairs chromium plated telephone shower with 1.5m long flexible tube & swill wall hook including fixed to steel pipes or union and complete all as specified. Make : Jaquar, Cat No - HSH-5537H or equivalent as approved by GE.

S&F in repairs chromium plated metropole flush valve dual flow concealed type woth control cock operation plate 40 mm size including fixed to steel pipes or union and complete all as specified. Make : Jaquar, Cat No - FLV-1089Q or equivalent as approved by GE.

S&F in repairs of vitreous China wash basin including pedastal, white, flat back, size 630mm x 450mm including chromium plated waste coupling, plug and chain, necessary brackets. Make : CERA, Cat No 1008 & 1108 or equivalent in Hindaware as approved by GE.

S&F in repairs chromium plated soap dish holder. Make Jaquar, Cat No AQN-7731 or equivalent as approved by GE.

S&F in repairs chromium plated toilet paper holder. Make Jaquar, Cat No AQN-7751 or equivalent as approved by GE.

S&F in repaires chromium plated towel rail 24" long between flanges. Make Jaquar, Cat No AQN-7711 or equivalent as approved by GE.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern)(wall hung type) white (excluding, flushing cistern and flush pipe) complete connected to drain make : CERA, Cat No - 2033 & 2315 or equivalent as approved by GE

S&F in repair sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all sizae 915 x 460 mm, bowl size 410 x 330 x 180 mm mm Make : Nirali (Model : elegance small from regular range, glossy) or size 915 mm x 460 mm bowl size 410 x 330 x 178 mm of make : Jayana (Model : Jujpiter sink with Drain board No: SBSD 5 glossy) or equivalent and nearest size of make : Lorrentto, Neelkanth, Diamond.

Supply and Fixing of Stainless steel 304 Grade Plate Rack made of 1 mm thick stainless steel sheet, overall size 60cm x 90cm for 6 plates as approved by GE. Make: Prayag Cat No P-336 or nearest in Nirali, Neelkant as approved by GE

Taking down cement plaster on walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces complete all as specified and directed.

M&L for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement as specified.

M&L for rendering on concrete surfaces 15mm thick in two layers first coat 10mm thick in CM 1:6 and second coat 5mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and fair complete all as specified and directed..

Supply only water proofing compound

M&L for preparation of new or previously untreated concrete extrernal surfaces and applying two coats of exterior emulsion paint all as specified and directed by EIC .

M&L for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of Acrylic putty by finishing the surfaces even and smooth complete all as specified and directed by EIC.

S/F100mm size of hinges butt hinges, medium weight, cold rolled mild stee and fixed all as directed by Engr-in-Charge.

S/F 100mm size extruded aluminium alloy handles, fabricated type, anodised all as directed by Engr-in-Charge.

S/F aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size all as directed by Engr-in-charge

S&F in repairs 20/22mm dia fancy type SS 304 grade curtain rods with wall thickness not less than 1.25mm, fixed to walls with and including a pair of fancy type SS brackets and SS clamps best quality as approved by GE complete all as specified and as directed. (Note - Length of curtain rod shall be measured and paid for as one unit. Quoted rate is deemed to include for provision of a pair of brackets and clamps per unit length)

S&F in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screw to timber frame works including teak wood beading 20mm thick alround and beading painted with 2 coats of synthetic enamel paint over one coat of primer all as specified and directed as in cupboard shutters.

S&F in repairs PVC shelf fixed to walls with screws including necessary drilling holes. Make : Prayag Cat no - 191 or equivalent as approved by GE.

S&F in repairs PVC corners fixed in bath rooms with screws including necessary drilling holes. Make : Prayag Cat no - 192 or equivalent as approved by GE.

Taking down carefully old metro flush internal parts and servicing the parts including replacing the parts which are not functioning / serviceable and re-fixing the all internal parts of metro flush in position in existing opening complete all as directed. Note: (i) Supply only new parts of metro flush shall be measured and paid separately against the relevant items here-in-after (iii) The parts of metro flush shall be of the same make as per existing or equavalent as approved by GE.

Supply only push control cock.

Supply only Sleeve

Supply only Wall flange

Supply only Lock

Supply only Spring Cap / Key

Supply only Spring

Supply only Seal Washer

Supply Body Nut

Supply only O-Ring Small Size

Supply only O-Ring Large Size

Supply only stopper Bush

Supply only sealed piston and spindle

M&L for surface dressing n exc 15cm deep in soft/loose soil including cleaning away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots and trees n exc 30 cm girth and removing rubbish upto a distance of 50m outside the periphery of the area complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base under interlocking tiles complete all as specified and directed.

M&L 60 mm thick (M-35 mix) with grey cement and pigment, glossy rubber mould intelocking tiles (paver blocks red & yellow colour topping) conforming to IS-15658-2006 laid dry over 30 mm copacted sand bed, size & pattern of tiles all as directed by Engineer-in-Charge. Make- Lucky/ Supreme/Mehtab as approved by GE.

Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning etc capacity of tank exc 500 and n.exc 1000 ltr complete all as specified and directed.

S & F rotational moulded polythene white water storage tank tripple layared (cylindrical , vertical with closed top , ISI marked , ) hoisted and fixed in position all as specd in SSR Part 1 of capacity 500 ltrs including taking down existing tank also including provision of 20 mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum wt 455 gms)( Make of tank Sintex cat no CCWS 0075-02-TLW or equivalent of makes given in Appendix B to PS Make of ball valve Prayag or equivalent in polytuff as approved by GE

S & F rotational moulded polythene white water storage tank tripple layared (cylindrical , vertical with closed top , ISI marked , ) hoisted and fixed in position all as specd in SSR Part 1 of capacity 750 ltrs including taking down existing tank also including provision of 20 mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum wt 455 gms)( Make of tank Sintex cat no CCWS 0075-02-TLW or equivalent of makes given in Appendix B to PS Make of ball valve Prayag or equivalent in polytuff as approved by GE

S & F rotational moulded polythene white water storage tank tripple layared (cylindrical , vertical with closed top , ISI marked , ) hoisted and fixed in position all as specd in SSR Part 1 of capacity 1000 ltrs including taking down existing tank also including provision of 20 mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum wt 455 gms)( Make of tank Sintex cat no CCWS 0075-02-TLW or equivalent of makes given in Appendix B to PS Make of ball valve Prayag or equivalent in polytuff as approved by GE

S&F, in repair 20mm bore ball vavle high pressure of PTMT with epoxy coated aluminium road and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F, in repair 20 mm bore gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F, in repair 15 mm bore gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F of pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock stricke plate etc., complete as specified.

S&F of pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock stricke plate etc., complete as specified.

M&L for providing cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in roof kerbs, mud stops, filling in frames and the like rounded or or chamfered on edges.

M&L for cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in bed blocks for fixing of hold fasts and the like including weathering, slightly rounded or chamfered angles and throating as directed.

S&F 18mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works

All as per item above but 18mm thick plain PVC celuka ply

All as per item above but 12mm thick plain PVC celuka ply

All as per item above but 05mm thick plain PVC celuka ply

S&F PVC coated basket for kitchen drawers of required size and including sliding channels

S&F 100mm size extruded, brass handle fabricated type polished complete all as specified and directed by Engineer-in-Charge.

S&F 75mm size butt hinges,cast brass with mild steel hinge pin bright polished complete all as specified and directed by Engineer-in-Charge.

ASHAPURA CONTRACTOR

M/s Shivji Rana Chad