Tender ID

CPPP

Active

Works

Electrical Works

Providing of electrical installation fans and service connection at temporary URO cum U s MT Stores at BSF Campus Rajarhat under Ftr HQ BSF SB

DG,BSF,MHA

FTR HQ BSF South Bengal Kolkata | 24 Paraganas North, West Bengal

Amount: ₹2.8 LCloses: 4 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published27 Oct 2026
Closes4 Nov 2026
Bid Opening5 Nov 2026

Tender Value

₹2.8 L

EMD Value

₹5,618

Closing Date

4 Nov 2026, 12:00 pm

Tender Inviting Organisation

Name

Assistant Engineer (Elect)

Address

FTR HQ BSF SOuth Bengal Kolkata

Work Description

Providing of electrical installation fans and service connection at temporary URO cum U s MT Stores at BSF Campus Rajarhat under Ftr HQ BSF SB

Tender Information

Tender ID

2026_BSF_931818_1

Reference Number

19/FTR-SB/AE(E)/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Percentage

Period of Work

30 days

Location

FTR HQ BSF South Bengal Kolkata

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer tender documents

Documents Required

14 documents required · 14 mandatory

Fee/PreQual/Technical

RequiredOriginal EMD and copy of receipt for deposition of original EMD as per form- A (.pdf)

RequiredValid electrical enlistment order of CPWD, MES, .BSNL, Railways and state PWD. (.pdf)

RequiredValid electrical license. (.pdf)

RequiredPAN card and GST registration certificate. (.pdf)

RequiredCertificates of similar type of work experience as per form 6. (.pdf)

RequiredLatest ITR and GST return. (.pdf)

RequiredScanned copy of NIT duly ink sign and stamped by the contractor on each page. (.pdf)

RequiredForm D format for understanding the project site (Latest). (.pdf)

RequiredForm E format for no deviation certificate (Latest). (.pdf)

RequiredForm F format for integrity pact (Latest). (.pdf)

RequiredAffidavit as per close 1.2.3 of form 6 on non judicial stamp paper of minimum Rs 100/- (Latest) (.pdf)

RequiredAn undertaking is required that bidder is not blacklisted/ banned by any department (.pdf)

RequiredAverage annual financial turnover of last 3 years should be at least 30 percent of estimated cost. (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹5,618

Important Dates

Last Activity

27 Oct 2026

Published

27 Oct 2026

Bid Opening

5 Nov 2026

Download Starts

27 Oct 2026

Download Ends

4 Nov 2026

Submission Starts

27 Oct 2026

Clarification Period

27 Oct 2026 - 4 Nov 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (22 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C	14	Each	1,339	₹18,746
2	Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required.	20	Mtr	373	₹7,460
3	Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required i) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire	20	Mtr	267	₹5,340
4	Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. i) 5 x 4 sq. mm	30	Mtr	362	₹10,860
5	Supplying and fixing of 25 mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.	30	Mtr	168	₹5,040
6	Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.	3	Each	423	₹1,269
7	Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.	3	Each	588	₹1,764
8	Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.	14	Each	104	₹1,456
9	Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) i) 8 way (4 + 24), Double door	1	Each	10,724	₹10,724
10	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. i) Single pole	6	Each	285	₹1,710

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.78 MB

Work Item Documents

NIT.pdf

Tender Documents • 0.66 MB

BOQ_979215.xls

BOQ • 0.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C

Each

1,339

₹18,746

Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required.

Mtr

373

₹7,460

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required i) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Mtr

267

₹5,340

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. i) 5 x 4 sq. mm

Mtr

362

₹10,860

Supplying and fixing of 25 mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Mtr

168

₹5,040

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Each

423

₹1,269

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Each

588

₹1,764

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Each

104

₹1,456

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) i) 8 way (4 + 24), Double door

Each

10,724

₹10,724

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. i) Single pole

Each

285

₹1,710