Job Work

Amount

1. Taking out unserviceable HT UG cables from excavated trenches, ducts, wall, pole etc including removing cable covers, sand, cable joints, pipes, clamps etc for the following size of cable :- HT cables of 120 sqmm, 3 core – 335 RM. (Note :- Excavation, returning filling and removing of soil shall be measured in item No 2, 3 & 4) 2. Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge. = 122.11 Cum) 3. Returning filling in soil and including spreading leveling watering and well ramming in layers n.exc. 25 cm thick. (Total R/F = Exc 37.27 = 122.11 – 37.27 = 84.83 Cum). 4. Removing excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5m above the starting points (Total Removal = 37.27 Cum). 5. Relaying connecting, Megger testing, commissioning and jointing, HT underground cable 11000 volts grade in trenches, duct, fixed on poles/walls with proper size saddles and clamp laid under roads / path / drain / culverts all as specified and as directed by the EIC of following size : HT cables of 120 sqmm, 3 core=335 RM).

6. M & L for Cable joints kit for 11 KV (Earthed) grade cable for Straight through heat shrink type joints complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm 3 core all as specified and as directed – 04 Nos 7. M & L for Cable joints kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joints complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm 3 core all as specified and as directed – 02 Each. 8. Laying only retrieved sixty percent serviceable cable covers obtained while taking out UG cable from srl item No 1 above = 952 Each 9. M & L unreinforced precast concrete cable covers CLASS HV type I, flat size 300 x 180 x 40 mm laid transverse to cable. = 635 Each) 10. M&L for sand cushioning for UG cables using dry river sand, gently punning down all as directed and specified. = 24.42 CUM) Note:- (a) All material, labour and T and P required for complete the job is responsibility of the firm. (b) All old retrieved cable shall be property of firm.

M/s Bombay Novelty Stores

Hi-Tech Systems

BHAVANI PROVISION STORES

Bhavik Construction