REPAIR TO PLUMBING, SANITARY FITTINGS, JOINERY ALONGWITH CLEANING OF SERVICE TANKS, OVERFLOWS, REPLACEMENT OF OLD/ UNSERVICEABLE SERVICE TANKS, WATER SUPPLY PIPES INCL CERTAIN ELECT WORKS AND WELCOME MAINTENANCE OF OMQ AT AF STN BHUJ

Amount

Demolition of Precast concrete block walling built in cement mortar complete all as specified and as directed by Engineer-in-Charge.

Material & labour for Precast cement concrete block masonary with solid blocks exc 10cm in width Type C1 (1:3:6) (using 20mm graded stone aggregates) and setting in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old treated surfaces on wall including brooming down, scrapping down smoke soots etc. and appying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old treated surfaces on ceiling including brooming down, scrapping down smoke soots etc. and appying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old treated surfaces on wall surfaces and applying one coat of distemper complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old treated surfaces on ceiling surfaces and applying one coat of distemper complete all as specified and directed by Engineer-in-Charge.

Material and labour for complete removal of existing treatment on old treated surfaces applying two coat of distemper over 1 to 2 mm thick a coat of birla putty complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old wooden painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame). complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed by Engineer-in-Charge.

Supply & fix pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock stricke plate etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock stricke plate etc complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises. complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC door PDS-01 comprising of shutter and frame of Make : Rajshree/Accura Polytech Pvt Ltd (Accucel) all as shown on drg No.CEAA/TD/149 sheet No. 1/1 (PVC RIGID FOAM) , door frame/ chowkats of solid rigid foam profile FP-6030 and shutter of solid PVC foam profile FP 7114 with 4 mm thick high pressure compact laminate as infill (Panel) including necessary hardeware fittings complete all as specified and directed by Engineer-in-Charge.

Supply & fix 35mm thick 2nd class hard wood factory made plain framed, paneled shutters (any number of panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veveered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated. complete all as specified and directed by Engineer-in-Charge.

Supply & fix 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/ Gauge etc. Size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) complete all as specified and directed by Engineer-in-Charge.

Supply & fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih SS wire staples. complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing new or previously untreated surfaces wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on wooden surface complete all as specified and directed by Engineer-in-Charge.

Supply & fix 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy complete all as specified and directed by Engineer-in-Charge.

Supply & fix 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminium, anodised 100mm size of hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.

Supply & fix mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

Material and labour for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately. Note : main section of aluminium shall be used 100mmx45MM with same thickness as mentioned in lieu of drg 65mm x 38mm above reffered due to less space available for fixing wire gauge shutter fixing grill complete all as specified and directed by Engineer-in-Charge.

Material and labour for aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 4.4 mm x 7mm complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land complete all as specified and directed by Engineer-in-Charge.

Material & labour for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for glazed digital ceramic coloured tiles Ist quality in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and icluding plaster in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Material & labour for non skid ceramic coloured tiles 7 to 8mm thick (sqaure/rectangular) area of each tiles exc. 0.06Sqm but n.exc. 0.11Sqm as per IS - 13755 in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Material & labour for vitrified ceramic dark shade 10 mm thick (sqaure/rectangular) area of each tiles n.exc. 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing tiles and including 15 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

Material & labour for vetrified ceramic tiles in vertical surfaces 600 x 200 x 10 mm thick set and jointed in neat cement slurry and pointed in colour cement to match existing tiles and inluding rendering 10 mm thick in cement mortar 1:4 on concrete surfaces as backing coat complete all as specified and directed by Engineer-in-Charge.

Material & labour for in repairs for 20mm thick granite, Z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded. complete all as specified and directed by Engineer-in-Charge.

Taking up on down steel tubing and connection incl cleaning for refining of the following bore of pipe complete all as specified and directed by Engineer-in-Charge.

15mm bore of pipe

20mm bore of pipe

25/32mm bore of pipe

Supply & fix CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes: (SDR-13.5 of Make : Astral or equivalent of Supreme / Finolex) complete all as specified and directed by Engineer-in-Charge.

20mm nominal dia of pipes

25mm nominal dia of pipes

32 mm nominal dia of pipes

40 mm nominal dia of pipes

Supply & fix in repair grating doom 125mm dia with waste hole of PTMT (minimum weight 40 grams) . etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engineer-in-Charge.

Dismantling of cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge following bore of pipe complete all as specified and directed by Engineer-in-Charge.

100/110 mm dia of pipes

75 mm dia of pipes

Supply & fix of UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors of following size :- (Make : Astral type 'B' pipes or equivalent) complete all as specified and directed by Engineer-in-Charge.

110 mm dia of pipe

75 mm dia of pipe

Supply & fix of UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement of following sizes :- (Make : Astral type 'B' pipes or equivalent) complete all as specified and directed by Engineer-in-Charge.

110 mm dia of pipe

75 mm dia of pipe

Supply & fix PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls of following size : -

75 mm bore

110 mm bore

Supply & fix PVC (SWR) bends any radius of following sizes :-

75 mm bore

110 mm bore

Supply & fix in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement with 75mm outlet dia complete all as specified and directed by Engineer-in-Charge..

Supply & fix PVC (HDPE) pipe of 32mm dia with all fittings and fixed complete to walls and ceiling or laid in floors including taking down of old pipes complete all as specified and directed by Engineer-in-Charge..

Supply & fix in repairs Hand health Faucet spray to EWC with PVC nozzle, and PVC flexible pipe etc complete all as specified and directed by Engineer-in-Charge..

Supply & fix in repairs bathroom cabinet PVC frame box type with mirror in front of size 350x450mm with 6 m thick glass fixed to wall with screws complete all as specified and directed by Engineer-in-Charge.Make : Prayag(Cat No :551)

Supply & fix in repair bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia of piep complete all as specified and directed by Engineer-in-Charge. Make : Jaquar, Cat No QQT-7037.

Supply & fix in repairs Angular stop cock with adjustable wall flange, cast coper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe complete all as specified and directed by Engineer-in-Charge. Make : Jaquar, Cat No - QQT-7053.

Supply & fix in repairs chromium plated mixing valve, wall mixer 3 in 1 system with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe including three joints to steel pipe or unions complete all as specified and directed by Engineer-in-Charge. Make : Jaquar, Cat No QQT-7281.

Supply & fix in repairs chromium plated mixing valve (central hole basin mixer) with small spout without popup waste system with 450mm long braided hoses including three joints to steel pipe or unions complete all as specified and directed by Engineer-in-Charge. Make : Jaquar, Cat No - QQT-7167B.

Supply & fix in repairs chromium plated shower rose overhead single flow 100mm dia (ABS chrome plated) without Arm including fixed to steel pipes or union and complete all as specified and directed by Engineer-in-Charge. Make: Jaquar, Cat No - OHS-1989.

Supply & fix in repairs chromium plated telephone shower with 1.5m long flexible tube & swill wall hook including fixed to steel pipes or union and complete all as specified and directed by Engineer-in-Charge. Make : Jaquar, Cat No - HSH-5537H.

Supply & fix in repairs chromium plated metropole flush valve dual flow concealed type woth control cock operation plate 40 mm size including fixed to steel pipes or union and complete all as specified and directed by Engineer-in-Charge. Make : Jaquar, Cat No - FLV-1089Q.

Supply & fix in repairs of vitreous China wash basin including pedastal, white, flat back, size 630mm x 450mm including chromium plated waste coupling, plug and chain, necessary brackets complete all as specified and directed by Engineer-in-Charge. Make : CERA, Cat No 1008 & 1108 or equivalent in Hindaware as approved by GE.

Supply & fix in repairs chromium plated soap dish holder complete all as specified and directed by Engineer-in-Charge. Make Jaquar, Cat No AQN-7731.

Supply & fix in repairs chromium plated toilet paper holder complete all as specified and directed by Engineer-in-Charge. Make Jaquar, Cat No AQN-7751.

Supply & fix in repaires chromium plated towel rail 24" long between flanges complete all as specified and directed by Engineer-in-Charge. Make Jaquar, Cat No AQN-7711.

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern)(wall hung type) white (excluding, flushing cistern and flush pipe) complete connected to drain complete all as specified and directed by Engineer-in-Charge make : CERA, Cat No - 2033 & 2315.

Supply & fix in repair sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all sizae 915 x 460 mm, bowl size 410 x 330 x 180 mm mm Make : Nirali (Model : elegance small from regular range, glossy) or size 915 mm x 460 mm bowl size 410 x 330 x 178 mm of make : Jayana (Model : Jujpiter sink with Drain board No: SBSD 5 glossy) or equivalent and nearest size of make : Lorrentto, Neelkanth, Diamond complete all as specified and directed by Engineer-in-Charge

Supply & fix in repair stainless steel plate rack made out of 1mm thick stainless steel sheet, overall minimum size 60cm x 90cm and for 6 plates as approved by GE and complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces. complete all as specified and directed by Engineer-in-Charge

Material & labour for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

Material & labour for rendering on concrete surfaces 15mm thick in two layers first coat 10mm thick in CM 1:6 and second coat 5mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and fair complete all as specified and directed by Engineer-in-Charge

Supply only water proofing compound complete all as specified and directed by Engineer-in-Charge

Material & labour for preparation of new or previously untreated concrete extrernal surfaces and applying two coats of exterior emulsion paint complete all as specified and directed by Engineer-in-Charge

Material & labour for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of Acrylic putty by finishing the surfaces even and smooth complete all as specified and directed by Engineer-in-Charge.

Supply & fix 100mm size of hinges butt hinges, medium weight, cold rolled mild stee and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs 20/22mm dia fancy type SS 304 grade curtain rods with wall thickness not less than 1.25mm, fixed to walls with and including a pair of fancy type SS brackets and SS clamps best quality as approved by GE complete all as specified and directed by Engineer-in-Charge. (Note - Length of curtain rod shall be measured and paid for as one unit. Quoted rate is deemed to include for provision of a pair of brackets and clamps per unit length)

Supply & fix in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screw to timber frame works including teak wood beading 20mm thick alround and beading painted with 2 coats of synthetic enamel paint over one coat of primer complete all as specified and directed by Engineer-in-Charge as in cupboard shutters.

Supply & fix in repairs PVC shelf fixed to walls with screws including necessary drilling holes. Make : Prayag Cat no - 191 or equivalent as approved by GE complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs PVC corners fixed in bath rooms with screws including necessary drilling holes. Make : Prayag Cat no - 192 or equivalent as approved by GE complete all as specified and directed by Engineer-in-Charge.

Taking down carefully old metro flush internal parts and servicing the parts including replacing the parts which are not functioning / serviceable and re-fixing the all internal parts of metro flush in position in existing opening complete all as specified and directed by Engineer-in-Charge. Note: (i) Supply only new parts of metro flush shall be measured and paid separately against the relevant items here-in-after (iii) The parts of metro flush shall be of the same make as per existing or equavalent as approved by GE.

Supply only push control cock complete all as specified and directed by Engineer-in-Charge.

Supply only Sleeve complete all as specified and directed by Engineer-in-Charge.

Supply only Wall flange complete all as specified and directed by Engineer-in-Charge.

Supply only Lock complete all as specified and directed by Engineer-in-Charge.

Supply only Spring Cap / Key complete all as specified and directed by Engineer-in-Charge.

Supply only Spring complete all as specified and directed by Engineer-in-Charge.

Supply only Seal Washer complete all as specified and directed by Engineer-in-Charge.

Supply Body Nut complete all as specified and directed by Engineer-in-Charge.

Supply only O-Ring Small Size complete all as specified and directed by Engineer-in-Charge.

Supply only O-Ring Large Size complete all as specified and directed by Engineer-in-Charge.

Supply only stopper Bush complete all as specified and directed by Engineer-in-Charge.

Supply only sealed piston and spindle complete all as specified and directed by Engineer-in-Charge.

Material & labour for surface dressing n exc 15cm deep in soft/loose soil including cleaning away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots and trees n exc 30 cm girth and removing rubbish upto a distance of 50m outside the periphery of the area complete all as specified and directed by Engineer-in-Charge.

Material & labour for 75mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base under interlocking tiles. complete all as specified and directed by Engineer-in-Charge.

Material & labour for 60 mm thick (M-35 mix) with grey cement and pigment, glossy rubber mould intelocking tiles (paver blocks red & yellow colour topping) conforming to IS-15658-2006 laid dry over 30 mm copacted sand bed, size & pattern of tiles complete all as specified and directed by Engineer-in-Charge. Make- Lucky/ Supreme/Mehtab as approved by GE. .

Supply & fix Fatory made "Rajshri" PVC Internal door Frame manufractured BY Rajshri of the size 120mmx50mm(double door Frame) with a wall thickness of 5mm PVC Celuka Sheet of density 600Kg/Cbm manufractured by an ISO-9000 certified company, made out of extruded 5mm PVC Celuka sheet, mitre cut at two corners and joined with two Nos, of 150mm long brackets of 15mmx15mm M.S Square tube. The two vertical door profiles are to be reinforced with 20mm x20mm M.S tube of 19 guage throughout the frame. The door frame shall be fixed to the wall using 65/100mm long M.S screws through the frame by using PVC Fasteners. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc complete as per manufractures specification and complete all as specified and directed by Engineer-in-Charge.

Supply & fix 30mm thick Rajshri brand factory made internal PVC one side Prelem door shutter wood Free consisting of frame made out of M.S tubes of 19 guage thickness and size of 20mm x 20 mm for stiles as well as top bottom & lock rail. The inside panel shall consist of 20mm thick multi chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement adhesive with 5mm (+0.5) thick prelam PVC sheet of the inside panel. All the four edge of the panel to be sealed with lipping of 10mm thick & 20 mm wide PVC sheet baton(made by sticking 2Nos. rigid foam PVC sheets of 5mm (+0.5) thickness using PVC solvent cement adhesive. 20mm thick (5mm x 4 Nos) Thick PVC sheet to be given for lock provision at lock provision at lock height. Complete as per direction of Engr-in-charge, manufractures specification and drawing complete all as specified and directed by Engineer-in-Charge.

Supply & fix 30mm thick Rajshri brand factory made wire mesh solid PVC door shutter consisting of frame made out of M.S tubes of 19 guage thickness and size of 20mm x 20 mm for stiles and 15mm x 15mm for top, lock & bottom rails. 20mm x 20mm M.S square tubes shall be covered with 5mm thick heat moulded Rajshri PVC 'C' channel of size 30mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be PVC beading on either side forming stiles & 5mm thick 115mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be PVC beading on the inner side to from top and bottom rail and 130mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be PVC beading on from lock rail 10mm (5mm x2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panel will be Alumunium wire mesh fitted in by 'C' channel of size 35mm x 10mm on the eitherside in stiles. The inner side 'C' channel is fixed by 20mm x 20mm M.S. tube on both sides with screws. The wire mesh in top, bottom & lock rail is sealed with total 8 Pars of 15mm x 15mm & 20mm x 20mmtube with Aluminium wire 10mm (5mm x 2) thick PVC strip of 25mm width is to be stuck & nails on both side of Aluminium wire mesh interior at the top, bottom & lock rail. Complete as per direction of Engr-in-charge, manufractures specification and drawing complete all as specified and directed by Engineer-in-Charge.

S&F 18mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge.

All as per item No 94 above but 18mm thick plain PVC celuka ply complete all as specified and directed by Engineer-in-Charge.

All as per item No 94 above but 12mm thick plain PVC celuka ply complete all as specified and directed by Engineer-in-Charge.

All as per item No 94 above but 05 mm thick plain PVC celuka ply complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC coated basket for kitchen drawers of required size and including sliding channels complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs only sliding channel for fixing of PVC Coated basket complete all as specified and directed by Engineer-in-Charge.

Supply & fix 100mm size extruded, brass handle fabricated type polished complete all as specified and directed by Engineer-in-Charge

Supply & fix 75mm size butt hinges,cast brass with mild steel hinge pin bright polished complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning etc capacity of tank exc 500 and n.exc 1000 ltr complete all as specified and directed by Engineer-in-Charge.

Supply & fix rotational moulded polythene white water storage tank tripple layared (cylindrical , vertical with closed top , ISI marked , ) hoisted and fixed in position all as specd in SSR Part 1 of capacity 500 ltrs including taking down existing tank also including provision of 20 mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum wt 455 gms)( Make of tank Sintex cat no CCWS 0075-02-TLW or equivalent of makes given in Appendix B to PS Make of ball valve Prayag or equivalent in polytuff as approved by GE complete all as specified and directed by Engineer-in-Charge.

Supply & fix rotational moulded polythene white water storage tank tripple layared (cylindrical , vertical with closed top , ISI marked , ) hoisted and fixed in position all as specd in SSR Part 1 of capacity 750 ltrs including taking down existing tank also including provision of 20 mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum wt 455 gms)( Make of tank Sintex cat no CCWS 0075-02-TLW or equivalent of makes given in Appendix B to PS Make of ball valve Prayag or equivalent in polytuff as approved by GE complete all as specified and directed by Engineer-in-Charge.

Supply & fix rotational moulded polythene white water storage tank tripple layared (cylindrical , vertical with closed top , ISI marked , ) hoisted and fixed in position all as specd in SSR Part 1 of capacity 1000 ltrs including taking down existing tank also including provision of 20 mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum wt 455 gms)( Make of tank Sintex cat no CCWS 0075-02-TLW or equivalent of makes given in Appendix B to PS Make of ball valve Prayag or equivalent in polytuff as approved by GE complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair 20mm bore ball vavle high pressure of PTMT with epoxy coated aluminium road and high density plastic ball screwed for iron pipe and fixed GE complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair 20 mm bore gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair 15 mm bore gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete of exc 15 cm thickness but above ground floors complete all as specified and directed by Engineer-in-Charge.

Material & labour for PCC 1:5:10 type E-2 (using 40mm graded stone aggregates ) mass concrete as in sunkun portion floors, complete all as specified and directed by Engineer-in-Charge.

Material & labour for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in roof kerbs/coping/ bed block /padding/ depression complete all as specified and directed by Engineer-in-Charge.

Taking down existing water proofing tretment on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and M&L for plaster 15 mm thck on concrete surfaces in cement mortar 1:4 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumenm primer confirm to IS - 3384-1986 @ 3% per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair GI spouts of 40 mm dia pipe , approxly 700mm long in sunken floors including necessary cutting , chipping of walls and making good with PCC 1:2:4 type B0 or cement mortar 1:3 with WPC complete all as specified and directed by Engineer-in-Charge.

INTERNAL ELECTRIFICATION

Pulling down the existing U/S wires of any type from concealed wiring carefully of aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as specified and directed by Engineer-in-Charge.

Pulling out sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed as earth wire continuity with PVC surface box complete all as specified and directed by Engineer-in-Charge for :-

One light point controlled by one, one way switch single pole piano type.

One Fan point controlled by one, one way switch single pole piano type.

One 3 pin 5 Amp socket outlet on the same board.

One 3 pin 5 Amps socket out let on independent board.

One bell point controlled by one bell push on independent boarde.

All as per item No.116 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through existing conduit including provn of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with new plastic laminated white coloured top sheet cover 3.0 mm thick on existing sunken box complete all as specified and directed by Engineer-in-Charge for :-

One light point controlled by one, one way switch single pole piano type .

One Fan point controlled by one, one way switch single pole piano type.

One 3 pin 5 Amp socket outlet on the same board.

One 3 pin 5 Amps socket out let on independent board.

One bell point controlled by one bell push.

All as per item No.118 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board complete all as specified and directed by Engineer-in-Charge. .

Material and labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through and including PVC casing caping ISI marked with accessories and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engineer-in-Charge.(Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

Material and labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 6 Sqmm single core, copper conductor drawn through and including PVC casing caping ISI marked with accessories and 6 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engineer-in-Charge.(Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

Material and labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor in existing conductor drawn through and including PVC casing caping ISI marked with accessories and 4 Sqmm single core multistranded copper conductor in existing conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engineer-in-Charge.(Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

Supply and Fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 20 W light source all as per Havells or equivalent in Orient/Philips/Bajaj/Crompton/Polycab including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative (white) with 2 Core copper wire from ceiling rose to light fitting as per Make Havells or equivalent in Orient/Philips/Bajaj/Crompton/Surya/Polycab complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 18/20 W 4 ft indoor decorative (white) with 2 Core copper wire from ceiling rose to light fitting as per Make Havells or equivalent in Orient/Philips/Bajaj/Crompton/Surya/Polycab complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of LED Lamp, 7 W ,Type of cap B22, wide operating Range 140V -280V, Input current 08mA- 30mA, lumen 180-300, UV and IR free light, color temperature 6500K, Cool Day light, up to 80 % Energy saving over GLS complete all as specified and directed by Engineer-in-Charge.. Make- Havells cat part no:- LHLDEUEEML8R007 / HPL / Bajaj /Philips / Orient/ Syska.

Supply & fix in Replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engineer-in-Charge (Make : Havell's, L&T/ Standard/C&S /Indoasian/Polycab)

Supply & fix in Replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 SPN 12 way with 200 Amp rated Busbar 415 volts powder coated complete all as specified and directed by Engineer-in-Charge (Make : Havell's, L&T/ Standard/C&S /Indoasian/Polycab)

Supply & fix in Replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 SPN 8 way with 200 Amp rated Busbar 415 volts powder coated complete all as specified and directed by Engineer-in-Charge (Make : Havell's, L&T/ Standard/C&S /Indoasian/Polycab)

Supply & fix in Replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 SPN, 4 way 415 volts powder coated complete all as specified and directed by Engineer-in-Charge (Make : Havell's, L&T/ Standard/C&S /Indoasian/Polycab)

Supply & fix in replacement of isolators/MCBs, etc. In distribution board of the following rating and capacities complete all as specified and directed by Engineer-in-Charge (Make : Havell's/ L&T/Standard/C&S/Indoasian/Polycab) :-

MCB TPN 415 volts 100 Amps Capacity, 10 KA

MCB TPN 415 volts 63 Amps Capacity, 10 KA

MCB SPN of 240 volts 20/32/40 Amps Capacity, 'C' series, 10 KA

MCB SPN of 240 volts 63 Amps Capacity, 'C' series, 10 KA

MCB SP of 240 volts 5-40 Amps Capacity, 'C' series, 10 KA

Supply and Fix in Replacement capacitor of capacity 2.5 mfd (PVC Body) suitable for ceiling/Exhaust fans/Wall Mounted Fans of any description,any sweep complete all as specified and directed by Engineer-in-Charge. Make:- Havells, Crompton, Bajaj,Usha

Taking down and Refixing Ceiling fans/Exhaust fan of any sweep any size from site after repair complete all as specified and directed by Engr-in-Charge.

Material and labour for taking out & removing old burnt-out windings of Ceiling fans of any description and rewinding of fan motor with appropriate size super enameled copper wire as approved by Eng-in-charge including insulating material such as illuminous paper,Letherized paper,cotton tape,glass sleeving,insulating varnish ,Bearing ,Bushes,capacitor etc.and transportation to site after testing at workshop,connecting and testing on full load to the entire satisfaction of Eng-in-charge,including painting of fans of any description(ceiling fan/exhaust fan/wall mounte fan/pedestal fan) with applying one coat of synthetic enamel paint(white/Grey) by spray machine including preparation of exisiting decorated surfaces of fans complete all as specified and directed by Engr-in-Charge

Material and labour for Servicing of 1200/1400MM Ceiling Fan by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes including replacing of unserviceable part like bearing ,gun metal bush, capacitor,Rubber reel of suitable capacity and re-assembling the same and complete all as specified and directed by Engr-in-Charge

Material and labour for rewinding of metal exhaust fans from 250mm to 450 mm sweep size by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes including replacing of unserviceable part like bearing ,gun metal bush, capacitor,Rubber reel of suitable capacity and re-assembling the same and complete all as specified and directed by Engr-in-Charge

Supply and Fix in replacement of metal body exhaust fan, AC single phase 230/240V of size 300 mm sweep with net frame including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan complete all as specified and directed by Engr-in-Charge. Make:- Bajaj/Havells/CG/Usha.( Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).

Supply and Fix in replacement of PVC body exhaust fan, AC single phase 230/240V of size 250 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan complete all as specified and directed by Engr-in-Charge. Make:- Bajaj/Havells/Crompton/Usha.( Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).

Supply and Fix in replacement of PVC body exhaust fan, AC single phase 230/240V of size 300 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan complete all as specified and directed by Engr-in-Charge. Make:- Bajaj/Havells/Crompton/Usha.( Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).

Supply and Fix modular Plastic surface box of module 1/2 flush type ISI marked make - Havells or equivalent make of Anchor/Polycab/ IndoASian complete all as specified and directed by Engr-in-Charge.

Supply and Fix modular Plastic surface box of module 3 flush type ISI marked make - Havells or equivalent make of Anchor/Polycab/ IndoASian complete all as specified and directed by Engr-in-Charge.

Supply and Fix modular Plastic surface box of module 4 flush type ISI marked make - Havells or equivalent make of Anchor/Polycab/ IndoASian complete all as specified and directed by Engr-in-Charge.

Supply and Fix modular white cover plate with frame of module 1 flush type ISI marked Havells or equivalent make of Anchor/Polycab/IndoAsian complete all as specified and directed by Engr-in-Charge. .

Supply and Fix modular white cover plate with frame of module 2 flush type ISI marked Havells or equivalent make of Anchor/Polycab/IndoAsian complete all as specified and directed by Engr-in-Charge. .

Supply and Fix modular white cover plate with frame of module 3 flush type ISI marked Havells or equivalent make of Anchor/Polycab/IndoAsian complete all as specified and directed by Engr-in-Charge. .

Supply and Fix modular white cover plate with frame of module 4 flush type ISI marked Havells or equivalent make of Anchor/Polycab/IndoAsian complete all as specified and directed by Engr-in-Charge. .

Supply and Fix modular white cover plate with frame of module 6 flush type ISI marked Havells or equivalent make of Anchor/Polycab/IndoAsian complete all as specified and directed by Engr-in-Charge. .

Supply and Fix modular white cover plate with frame of module 8 flush type ISI marked Havells or equivalent make of Anchor/Polycab/IndoAsian complete all as specified and directed by Engr-in-Charge. .

Supply and Fix modular blank plate module 1 complete all as specified and directed by Engr-in-Charge. .

Supply and Fix in replacement bell, AC, 230 V, SP, ding dong type complete all as specified and directed by Engr-in-Charge. Make Anchor/leader. .

Supply and Fix in replacement, modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and directed by Engr-in-Charge.

Supply and Fix in replacement modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and directed by Engr-in-Charge.

Supply and Fix in replacement modular swicth, 16 Amp flush type 1 module complete all as specified and directed by Engr-in-Charge. .

Supply and Fix in replacement modular socket outlet, 3 pin, 6/16 Amp flush type 2 complete all as specified and directed by Engr-in-Charge.

Supply and Fix in replacement modular bell push, flush type, 6 Amp,1 module complete all as specified and directed by Engr-in-Charge. .

Supply and Fix in replacement of ceiling fan regulator Modular Type electronic step type 5 step 360 deg 120 Watt 2 Module , Make- Havells or equivalent make of Anchor,Polycab complete all as specified and directed by Engr-in-Charge. .

Supply and Fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply and Fix in replacement of Ceiling rose 3 phase, PVC/ Polycarbonate body complete all as specified and directed by Engr-in-Charge.

Supply and Repair hylum sheet 3mm thick as existed in the switch board making provision for fixing switches and socket complete all as specified and directed by Engr-in-Charge.

Material and Labour for disconneting electrically and mechanically the existing geyser of any description,any capacity and make/type and in any position for repair/replacement/painting/cleaning etc including disconneting existing cold and hot water pipe connections, strip opening of geyser for descaling of tank element, thermostate,inlet/outlet water pipe connection etc using suitable chemical/wire brush,replacement of unserviceabe parts, re-assembling the same after,repair/descaling, fixing in position including, connecting inlet/outlet water pipe connection, electrical connections any testing of geyser complete all as specified and directed by Engr-in-Charge.

Supply and Fix in replacement metal plug top 20Amps 3 pin complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement 2.0 KW Electric heating element at site including rubber ring washers ISI marked Make: Theeta/Power pack/Racold/Vinus ( All ISI marked) complete all as specified and directed by Engr-in-Charge.

Supply and Fix in replacement for PVC connection with brass nipple 15 mm x 450 mm long for geyser 25/50 ltrs capacity as per sample complete all as specified and directed by Engineer in Charge.

Supply and Fix in replacement of 15mm bore bib taps ISI marked cast copper alloy fancy type chroumium plated with crutch butterfly handle screw down for iro n pipe or brass ferrule complete all as specified and directed by Engr-in-Charge. .

Supply and Fix in Replacement metal clad enclosure pole and neutral with a two pin and earth plug and socket complete 240 volt with one single pole MCB of 20 Amps. (Make : Havell's,\/ L&T/, Standard/C&S /Indoasian/Polycab) complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of LED Garden light / Post top of 25 Watt Integral pole mounted decorative LED with IP-65 protection complete fixed on existing post/New post with all assembly and electric connection with service wire complete all as specified and directed by Engr-in-Charge. .Make-Bajaj or equivalant in Crompton / Philips / Wipro)

Supply and Fix in replacement energy saving ceilling fan 1200mm sweep and connecting up including provision of cable from ceilling rose or connector to fan and complete all as specified and directed by Engr-in-Charge .Make :Usha or equivalent Bajaj/ Cromton Greaves/Havells (Note:- Old unserviceable Ceiling fan deposit in AGE E/M store yard)

Supply and fixing in replacement of Water heater storage type 25 Ltr, Ratted Wattage -2000 W, Voltage: -230V, AC Frequency (HZ): -50 Phase: -Single Auto cutoff, Rust Proof External Body Suitable for highrise building Suitable for water pressure head upto 8 bars Star rating (BEE): -5 . complete all as specified and directed by Engr-in-Charge Make:Racold or Equivalent in Venus/Crompton Greaves/Havells/Bajaj.(Note: Old unserviceable Water Heater will be deposited in MES store yard).

Supply and fixing in replacement Tamper proof Single phase AC KWH meter 10-60 Amps with following features including sealing and sealing wire, Class – 1 accuracy as per IS 13779, 240V, 50HZ LCD display, Forward energy recording irrespective of current direction, LED indication for earth leakage, elegant polycarbonate enclosure High surge with stand up to 8 KV Anti temper feature. Measures & Displays kWh complete all as specified and directed by Engr-in-Charge ( Note: Old unserviceable elect meter will be deposited in MES store yard).

M/s Shivji Rana Chad

BHAVANI PROVISION STORES

GOPI CONSTRUCTION

SARASWATI CONSTRUCTION

Pelectricals

ASHAPURA CONTRACTOR

GPR Construction Co.