REPAIRS MAINT OF WOODEN FURNITURE ITEMS, TRADE PATTERNS OPS WORK FURNITURES INCLUDING PAINTING POLISHING ETC AT JOSHIMATH RUDRAPRAYAG GAUCHER HARSIL SUKHI TEKLA NELONG MANA AULI UNDER GE 871 EWS

Amount

Bed Hard Wooden with ply Top , FD- 246 :

Removing old unserviceable head board and supply & fixing new head board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete teak wood beading shall be provided all around as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note:- Playwood shall be make of Archid Ply/Green Ply/Century Ply/Kitplay

Removing old unserviceable foot board and supply and fixing new foot board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete 4mm thick teak wood beading shall be all around provided as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note Playwood shall be make of Archid Ply/Green Ply/Century Ply

Removing old broken long rails and supply and fixing new long rails of seasoned shisham/ teak wood of size 1980x90x35mm as per drg duly french polished.

Removing old broken short rails and stiffener and converstion of old broken long rail into short rails and stiffener from obtained from items no 1.3 above and fix the same as per drg as per existing duly french polished

Removing old U/S worn out ply wood top and supply and fixing new ply wood top of 12 mm thick commercial BWR/ISI mark as approved by GE & rest all as per drg Note Playwood shall be make of Archid Ply/Green Ply/Century Ply

Preparation of wooden sufaces of Bed Hard wooden with plywood top by throughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing with french polish of two coat to obtain a glossy finish all as specified and directed.

Chair dinning High back (Drg No FD-357)

S&F in repairs first class teak wood rear leg all as specified and directed.

S&F in repairs first class teak wood front leg all as specified and directed.

S&F in repairs first class teak wood rear/front/side rail all as specified and directed.

S&F in repairs first class teak wood back rest all as specified and directed.

S&F in repairs first class teak wood stiffener all as specified and directed.

M&L providing new Cushion of appropriate size of cool foam with dismantling old one with first class raxine as per sample held with GE. Make- Sleepwell/Featherfoam

Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish Two coat to obtain a glossy finish all as specified and directed.

Chair CBA DB-3942:

Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable side rails and supply & fixing new side rails made out of seasoned shisham/teak wood duly holed as per drg.

Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood as per drg.

Removing of old unserviceable stiffeners and S&F new stiffeners made out of seasoned shisham/teak wood as per drg.

Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood as per drg.

M&L french polishing to repaired chairs with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing.

Bed Hard Wooden with ply Top TP

Removing old unserviceable head board and supply & fixing new head board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete teak wood beading shall be provided all around as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note:- Playwood shall be make of Archid Ply/Green Ply/Century Ply/Kitplay

Removing old unserviceable foot board and supply and fixing new foot board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete 4mm thick teak wood beading shall be all around provided as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note Playwood shall be make of Archid Ply/Green Ply/Century Ply

Removing old broken long rails and supply and fixing new long rails of seasoned shisham/ teak wood of size 1980mmx90mmx35mm as per drg duly french polished.

Removing old broken short rails and stiffener and converstion of old broken long rail into short rails and stiffener from obtained from items no 4.3 above and fix the same as per drg as per existing duly french polished

Removing old U/S worn out ply wood top and supply and fixing new ply wood top of 12 mm thick commercial BWR/ISI mark as approved by GE & rest all as per drg . Note: Playwood shall be make of Archid Ply/Green Ply/Century Ply

Preparation of wooden sufaces of Bed Hard wooden by throughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing with french polish of Two coat to obtain a glossy finish all as specified and directed.

Bed Hard Wooden Special (TP):

Removing old unserviceable head board and supply & fixing new head board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete teak wood beading shall be provided all around as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note:- Playwood shall be make of Archid Ply/Green Ply/Century Ply/Kitplay

Removing old unserviceable foot board and supply and fixing new foot board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete 4mm thick teak wood beading shall be all around provided as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note Playwood shall be make of Archid Ply/Green Ply/Century Ply

Removing old broken long rails and supply and fixing new long rails of seasoned shisham/ teak wood of size 1980x90x35mm as per drg duly french polished.

Removing old broken short rails and stiffener and converstion of old broken long rail into short rails and stiffener from obtained from items no 5.3 above and fix the same as per drg as per existing duly french polished

Removing old U/S worn out ply wood top and supply and fixing new ply wood top of 12 mm thick commercial BWR/ISI mark as approved by GE & rest all as per drg Note Playwood shall be make of Archid Ply/Green Ply/Century Ply

Preparation of wooden sufaces of Bed Hard wooden with plywood top by throughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing with french polish of Two coat to obtain a glossy finish all as specified and directed.

Chair easy cushioned FD-358 (m)

Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg.

Providing new cushion on Back rest & Seat of appropriate size of cool foam complete with dismantling old one with first class raxine/tepstray cloth as per sample held with GE. Make- Sleepwell/Featherfoam

M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing.

Chair dining FD-279 :

Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg.

M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing.

Chair writing (Drg No FD-202/ 250/280):

Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg.

M&L french polishing to repaired chair shall be done with high class finish including preparation of surfaces by proper sand paper all as specified and as shown on drawing.

Chair easy FD-229, DB-4174 :

Removing of old unserviceable front leg and S&F new front leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable rear leg and S&F new rear leg made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable side rails and S&F new side rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable front/back rails and S&F new front/back rails made out of seasoned shisham/teak wood all as per drg.

Removing of old unserviceable hand rest and S&F new hand rest made out of seasoned shisham/teak wood all as per drg.

Providing new cushion on Back rest & Seat of appropriate size of cool foam complete with dismantling old one with first class raxine/tepstray cloth as per sample held with GE. Make- Sleepwell/Featherfoam

Re-canning of Chairs (FD-228, FD-224, FD-274, FD-250, FD-75, FD-228) :- M&L for removing of old/broken/unserviceable plastic cane and re-canning of chair dining, chair CB without arms/chair writing, chairs CB with arms, chairs writing, chair CB office, chairs easy FD/NF, with 2.00 to 2.5mm semi round cane plastic of white colour. Rest all as per drgs. The canning work shall be done in Godrej pattern.

Teapoy ( Drg No FD-382/ 232 & 278)

Removing the existing unserviceable leg from teapoy and S&F the same made of first class Teak wood to match with the existing all as specifed and directed

Removing the existing unserviceable top rail (long/front) from Teapoy and S&F the same made of first class teak wood to match with the existing all as specifed and directed

Removing the existing unserviceable top rail (short/side) from teapoy and S&F the same made of first class teak wood to match with the existing all as specifed and directed

Removing the existing unserviceable top from teapoy and S&F the same with new one as to match with the existing made of 18mm thick pre-laminated MDF board one side laminated with 4mm thick teak wood beading all as specified and directed Make - Archid ply/Green ply/Century Ply

M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for Teapoy all as specified and directed.

Table Dining 6/8 persons -FD-273/376 :-

S&F Leg Shall be made of first class teak wood components of Table including dismantling unservicable one all as specified and as directed.

S&F Short Rail Shall be made of first class teak wood components of Table including dismantling unservicable one all as specified and as directed.

S&F Long Rail Shall be made of first class teak wood components of Table including dismantling unservicable one all as specified and as directed.

S & F in repair Top made of 18mm thick pre-laminated MDF/Particle board one side teak face including provision of 4mm thick teakwood beading all around complete.

Preparation of wooden sufaces by throughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing Two coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.

Peg Table:-

S & F Leg Shall be made of first class teak wood components of Table including dismantling unservicable one all as specified and as directed.

S & F Long rail shall be made of first class teak wood components of Table including dismantling unservicable one all as specified and as directed.

S & F Short rail shall be made of first class teak wood components of Table including dismantling unservicable one all as specified and as directed.

S & F in repair Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete.

Preparation of sufaces by throughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing Two coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.

Table Dressing Gents with mirror ( Drg No FD-379)

M&L for remoiving the exising unserviceable looking mirror with frame from Table Dressing Gents with mirror and S&F the same of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror including minor repairs all as specified and directed. Note : Make of Mirror should be of Modiguard/St Gobain

M&L for remoiving the exising unserviceable drawer from Table Dressing Gents with mirror and S&F new drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated MDF board one side laminated finish including provision of knob all as specified and directed.

M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for Table Dressing Gents with mirror all as specified and directed.

Table Writing Wooden (Drg No FD-249, 275,33)

Removing the existing unserviceable top of the table writing and S&F new top as to match with existing made out of 18 mm thick pre-laminated MDF board of Make century ply/Green ply/Archid ply one side laminated finish duly providing 4 mm thick teak wood beading all around all as specified and directed

Removing the existing unserviceable leg of the table writing and S&F the same with new one as to match with existing made out of teak wood all as specified and directed

Removing the existing unserviceable leg (short) of the table writing and S&F the same with new one to match with existing made out of teak wood all as specified and directed

Removing the existing unserviceable side/bottom rail of the table writing and S&F the same with new one to match with existing made out of teak wood all as specified and directed

Removing the existing unserviceable back of the table writing and S&F the same with new one as to match with existing made out of 6 mm thick plywood commercial and all as specified and directed

Removing the existing unserviceable side of the table writing and S&F the same with new one as to match with existing made out of 18 mm thick MDF board of Make- century ply/Green ply/Archid ply one side laminated finish all as specified and directed

Removing the existing unserviceable stiffener of the table writing and S&F the same with new one as to match with existing made out of teak wood and all as specified and directed

Removing the existing unserviceable drawer of the table writing and S&F the same with new one to match with existing made out of 18 mm thick MDF board of Make century ply/Green ply/Archid ply one side laminated finish including provision of knob all as specified and shown on drawing. Note :- Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality

Removing the old unserviceable complete cupboard from the table writing and S&F new cupboard as to match with existing made of 18 mm thick prelaminated MDF board Make of century ply/Green ply/Archid ply including back provided with 6mm thick commercial plywood all as specified and shown in drawing. Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality). (b) Hinges shall be 50 mm of approved quality.

M&L for preparation of wooden surfaces of the table writing with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified.

Table office offrs wooden.

Removing the existing unserviceable top of the table writing and S&F new top as to match with existing made out of 18 mm thick pre-laminated MDF board Make of century ply/Green ply/Archid ply one side laminated finish duly providing 4 mm thick teak wood beading all around all as specified and directed

Removing the existing unserviceable leg of the table writing and S&F the same with new one as to match with existing made out of teak wood all as specified and directed

Removing the existing unserviceable side/bottom rail of the table writing and S&F the same with new one to match with existing made out of teak wood and all as specified and directed

Removing the existing unserviceable stiffener of the table writing and S&F the same with new one as to match with existing made out of teak wood and all as specified and directed

Removing the existing unserviceable drawer of the table writing and S&F the same with new one to match with existing made out of 18 mm thick MDF/Particle board of Make century ply/Green ply/Archid ply one side laminated finish including provision of knob all as specified and shown on drawing. Note :- Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality

M&L for preparation of wooden surfaces of the table Office Officer with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified.

Table Dressing Ladies ( FD-32 (M), 251, 378)

Removing of old unserviceable mirror from table dressing ladies and S&F new mirror of size 1220 x 365 x 5 mm thick complete all as specified. Make : ATUL/Modi guard duly fixed with frame as per drg.

Removing of old unserviceable plastic laminated sheet from the top of table and providing new plastic laminated sheet 1.00 mm thick sunmica duly fixed with synthetic adhesive as per drg.

Removing of old unserviceable glass shutters and aluminium channels and providing new sliding glass shutters duly fixed with new aluminium channels as per drg.

Removing of old unserviceable drawer and knobs and providing of new drawers of MDF board 18 mm thick for sides and 6 mm thick ply wood commercial ISI marked for bottom including chromium plated knobs as per drg.

REPAIR TO TABLE CENTRE(FD-235, 274):

Removing of old U/S existing top from table and S&F new top of size as per drg. Top shall be 18 mm thick preliminated MDF board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood.

Removing of old U/S leg and S&F new leg of seasoned shisham/teak wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item.

M&L for preparation of wooden surfaces of the Center Tabel with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified.

TABLE CENTRE 2 TIER

Removing of old U/S existing top and bottom from center table 2 Tier and S&F new top and bottom of size as per drg. Top and bottom shall be 18 mm thick preliminated MDF/Particle board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed Edging all round the top shall be of 4mm teakwood.

Removing of old U/S leg and S&F new leg of seasoned shisham/teak wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item.

M&L for preparation of wooden surfaces of the Center Tabel with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified.

Repair to Table Bed Side(FD-276) :

Removing and S&F new top of table bed side made up of 18 mm thick prelaminated MDF board BWR exterior grade of size 450x350mm.

Removing of unserviceable sides of table bed side and S&F new sides of table bed side made up of 18 mm thick prelaminated MDF board BWR exterior grade of size 450x300mm.

Removing of unserviceable ply wood back of 6mm thick of table bed side of size 450x300mm.

Removing of unserviceable shelf of table bed side made up of 18mm board BWR exterior grade thick prelaminated MDF board

M&L for preparation of wooden surfaces of the Table Bed Side with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax all as specified.

Meat Safe FD- 47 (m):

Removing of old unserviceable front shutters with wire gauge/side wire gauge and S&F new front shutters with wire guage/sides of wire gauge. Shutter should be fitted with 25mm long butt hinges.Wire guage shall be of 12mm mesh and of 20 gauge. 75mm hasp and staple should be provided to top of shutter. All wood shall be 1st class teak. Two numbers ball spring catch shall be provided to each shutter and one coat of white paint .all as per shape and size shown on drawing

Removing old unserviceable aluminium hasp and saple and S&F New 75mm long aluminium hasp and staple best quality. Drg No FD-47

Removing old unserviceable aluminium handle and S&F new 100mm long aluminium handle of best quality

M&L for preparation of old wooden surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply primer where ever required and one coat of synthetic enamel white paint of approved make & quality inside and out side of Meat safe all as specified and as directed by Engr-in-Charge.

Repair to Trestle Store Room Wooden DrgFD-86(M) DB-410:-

M&L for taking out old unserviceable/broken long rail from Trestle Store room wooden and S&F new long rail made out of 2nd class hard wood of size 2440X100 X100mm thick made to shape and all as specified and shown on Drg No FD-86(M) DB-4101 and directed by Engr-in-Charge

M& for taking out old unserviceable/broken Middle rail from Trestle Store room wooden and S&F new Middle rail made out of 2nd class hard wood of size 1220X65X100mm thick made to shape and all as specified on Drg.FD-86(M) DB-4101 and directed by Engr-in-Charge

M&L for taking out old unserviceable/broken Legs from Trestle Store room wooden and S&F new Legs made out of 2nd class hard wood of size 400X100 X100mm thick made to shape all as specified and as shown on DrgFD-86(M) DB-410. and directed by Engr-in-Charge

M&L for preparation of wooden surfaces of the Trestle Store Room with sand/emery paper and applying One coat of Black Paint Synthetic Enamel of Approved Quality

Rack rifle( SD - 4312/FD- 312):-

Painting to Rack Rifle with two coat of olive green enamelled paints of approved brand.

M&L for taking out old unserviceable/broken chain from Rack Rifle S&F new one as exinsting

Book Shelf Open Small (FD-355) :-

M&L for taking out old unserviceable/broken Shelves S&F 19mm thick particle board commercial shall be provided at bottom, top, sides shelves and vertical partitions New Shelves made of 18 mm thick preliminated MDF/Particle board BWR exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly screwed. Edging all round the top shall be of 4mm teakwood.

Removing the existing unserviceable top from the Book Shelf Open Small and S&F new top as to match with the existing, made out of 18mm thick Pre-laminated particle board with laminated finish duly providing 4mm thick teak wood beading all round all as specified and as directed

Removing the existing unserviceable board from sides (both) of Book Shelf Open Small and S&F new 18mm thick one side teak face Pre-laminated particle board/MDF board with laminated finish duly providing 4mm thick teak wood beadingon sides (both) as to match with the existing all as specified and directed

Removing the existing unserviceable back of Book Shelf Open Small and S&F new back as to match with the existing, made out of 6mm thick commercial ply wood all as specified and directed

SOFA SET 4/5 SEATER(FD-281)

M&L for removing the old worn/torn out cushion from sofa sets 4/5 seats and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 560 x 530x100mm thick including provision tapesty cloth of approved shade & quality Make : sleepwell/Feather foam

M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from sofa sets 4/5 seats and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 300/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 560 x 530x100mm thick complete all as directed.

M&L for removing unserviceable/ broken Front Legs of sofa set 4 and 5 seater and S&F New Front Legs to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken rear legs of sofa set 4 and 5 seater and S&F new rear leg to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken battens of sofa set 4 and 5 seater and S&F new batterns to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken back rail for three seater of sofa set 5 seater and S&F new back rail to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken front rail for three seater of sofa set 5 seater and S&F new front rail to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken back rail for single seater of sofa set 4 and 5 seater and to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken front rail for single seater of sofa set 4 and 5 seater and to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken hand rest of sofa set 4 and 5 seater and S&F New hand rest to match the original complete all as specified and directed.

M&L for preparation of sufaces of sofa set 4 seater by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed.

M&L for preparation of sufaces of sofa set 5 seater by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed.

SOFA SET 5 SEATER Special (TP)

M&L for removing the old worn/torn out cushion from SOFA SET 5 SEATER Special (TP) and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 560 x 530x100mm thick including provision tapesty cloth of approved shade & quality Make : sleepwell/Feather foam

M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from SOFA SET 5 SEATER Special (TP) and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 300/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 560 x 530x100mm thick complete all as directed.

M&L for removing unserviceable/ broken Front Legs of SOFA SET 5 SEATER Special (TP) and S&F New Front Legs to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken rear legs of SOFA SET 5 SEATER Special (TP)and S&F new rear leg to match the original complete all as specified and directed.

M&L for preparation of sufaces of sofa set 5 seater special(TP) by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed.

Peg Table Special (TP):-

S & F Leg Shall be made of first class teak wood components of Table including dismantling unservicable one all as specified and as directed.

S & F Top made of 12 mm thick black film laminted glass components of Table including dismantling unservicable one all as specified and as directed.

Preparation of sufaces by throughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing Two coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the legs all as specified and directed.

Side Board FD-372/FD-247 :-

Removing the existing unserviceable door shutters (both) from side board and S&F new door shutters (both) as to match with the existing, made of 18mm thick Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all round including all fittings and fixtures all as shown on drawing and as directed Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality). (b) Hinges shall be 50 mm of approved quality.

Removing the existing unserviceable front portion of the drawer of side board and S&F new front portion of the drawer as to match with the existing made out of 18mm thick Pre-laminated particle board with laminated finish including new knob all as specified and directed

Removing the existing unserviceable top from the side board and S&F new top as to match with the existing, made out of 18mm thick Pre-laminated particle board with laminated finish duly providing 4mm thick teak wood beading all round all as specified and as directed

Removing the existing unserviceable plywood from sides (both) of side board and S&F new 3.5mm thick one side teak face plywood on sides (both) as to match with the existing all as specified and directed

Removing the existing unserviceable back of side board and S&F new back as to match with the existing, made out of 6mm thick commercial ply wood all as specified and directed

TABLE DINING 50"x36" (TP):-

S & F Leg Shall be made of first class teak wood components of Table including dismantling unservicable one all as specified and as directed.

S & F Top made of 14 mm thick black film laminted glass components of Table including dismantling unservicable one all as specified and as directed.

Preparation of sufaces by throughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing Two coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the legs all as specified and directed.

Chair Plastic cushion Model-Ornate (TP): M&L for removing the old worn/torn out cushion from Chair and tapesty cloth from seat and back of sofa and providing new one cool foam as exesting including provision tapesty cloth of approved shade & quality

Table office Clk wooden.

Removing the existing unserviceable top of the table writing and S&F new top as to match with existing made out of 18 mm thick pre-laminated MDF board one side laminated finish duly providing 4 mm thick teak wood beading all around all as specified and directed

Removing the existing unserviceable leg of the table writing and S&F the same with new one as to match with existing made out of teak wood all as specified and directed

Removing the existing unserviceable side/bottom rail of the table writing and S&F the same with new one to match with existing made out of teak wood and all as specified and directed

Removing the existing unserviceable stiffener of the table writing and S&F the same with new one as to match with existing made out of teak wood and all as specified and directed

Removing the existing unserviceable drawer of the table writing and S&F the same with new one to match with existing made out of 18 mm thick MDF/Particle board one side laminated finish including provision of knob all as specified and shown on drawing. Note :- Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality

M&L for preparation of wooden surfaces of the table Office Clk wooden with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified.

Center Table Special (TP):-

S & F Leg Shall be made of first class teak wood components of Table including dismantling unservicable one all as specified and as directed.

S & F Long rail shall be made of first class teak wood components of Table including dismantling unservicable one all as specified and as directed.

S & F Short rail shall be made of first class teak wood components of Table including dismantling unservicable one all as specified and as directed.

S & F Top made of 14 mm thick black film laminted Transperent glass components of Table including dismantling unservicable one all as specified and as directed.

Preparation of sufaces by throughly rubbing with emery paper and applying raw/burnt seina uniformly and polishing Two coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the legs all as specified and directed.

Repair to Table Bed Side Special (TP)

Removing and S&F new top of table bed side made up of 18 mm thick prelaminated MDF board BWR exterior grade of size 450x350mm.

Removing of unserviceable sides of table bed side and S&F new sides of table bed side made up of 18 mm thick prelaminated MDF board BWR exterior grade of size 450x300mm.

Removing of unserviceable wood back of 6mm thick of table bed side and S&F the same made of 12mm particle Bd of size 450x300mm.

Removing of unserviceable shelf of table bed side made up of 18mm board BWR exterior grade thick prelaminated MDF board

Table Dressing Ladies Special (TP)

Removing of old unserviceable mirror from table dressing ladies and S&F new mirror of size 1220 x 365 x 5 mm thick Make : ATUL/Modi guard duly fixed with frame as per drg.

Removing of old unserviceable plastic laminated sheet from the top of table and providing new plastic laminated sheet 1.00 mm thick sunmica duly fixed with synthetic adhesive as per drg.

Removing of old unserviceable cabinet and providing new one as existing

Removing of old unserviceable drawer and knobs and providing of new drawers of MDF board 18 mm thick for sides and 6 mm thick ply wood commercial ISI marked for bottom including chromium plated knobs as per drg.

Wooden Cabinet Special (TP)

Removing of old unserviceable door from wooden cabinet and S&F new one of size 1550 x 850 x 18 mm thick made of particle Board/MDF Board of exteriier qulaity match with existing Make : Archid Play/green Ply/Bhutan

Removing of old unserviceabl shelves made of particle Board/MDF Board of exterier qulaity match with existing Make : Archid Play/green Ply/Bhutan

Removing of old unserviceable drawer and knobs and providing of new drawers of MDF board 18 mm thick for sides and 6 mm thick ply wood commercial ISI marked for bottom including chromium plated knobs as per drg.

Table Bed Side (FD 16 GE 871 EWS)

S&F new components Legs of First class Teak wood including dismantling unservicable one all as specified and as directed.

S&F new components Top rail (long/front) of First class Teak wood including dismantling unservicable one all as specified and as directed.

S&F new components Top rail (short/side) of First class Teak wood including dismantling unservicable one all as specified and as directed.

Top18mm thick pre-laminated MDF board Make of Kitply/Grrenply/Archid Ply one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.

Preparation of surfaces with sand/emery paper and applying french polish Two coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Almirah mess utensil FD- 93 (m)

Removing of old unserviceable door from Almiraha mess utensil and S&F new one of existing shape and made of first class teak wood and good qulaity match with existing inbuilt in transparent glass of existing size

Removing of old unserviceable shelves made of first class teakwood good qulaity match with existing

M&L for preparation of sufaces of Almirah Mess Utensil by throughly rubbing with emery paper, applying raw/burnt seina uniformly from Almiarah Mess Utensil and polishing with french polish to obtain a glossy finish all as specified and directed.

Board notice 900x600mm ECHS-HFD-2037 FD- 366/Board notice 2440x1220 mm FD- 95/99 :- M &L old unsv Green/red Cloth from Notice Board S&F the new one of Existing size and quality complete all as specified and directed.

Sofa Set Single Seater Special (TP)

M&L for removing the old worn/torn out cushion from Sofa Set Single Seater Special (TP) and tapesty cloth from seat and back of sofa and providing new cushion of 32 density cool foam of size 560 x 530x100mm thick including provision tapesty cloth of approved shade & quality Make : sleepwell/Feather foam

M&L for removing the old worn/torn out tapesty cloth cover from seat foam and back foam of sofa from Sofa Set Single Seater Special (TP) and providing new tapestry cloth cover of approved shade & quality (cost of tapestry cloth shall be more than Rs. 300/- per metre) with zip on one side of cover for easy removing/closing purposes etc to cover the foam of size 560 x 530x100mm thick complete all as directed.

M&L for removing unserviceable/ broken Front Legs of Sofa Set Single Seater Special (TP) and S&F New Front Legs to match the original complete all as specified and directed.

M&L for removing unserviceable/ broken rear legs of Sofa Set Single Seater Special (TP)and S&F new rear leg to match the original complete all as specified and directed.

M&L for preparation of sufaces of Sofa Set Single Seater Special (TP) by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish to obtain a glossy finish all as specified and directed.

M/s Makhan Lal

m/s MD pandey sons