Karnataka

Active

Works

Irrigation and Other Works

Improvements to NLBC division office building and furnitures, and equipments at rodalabanda camp in lingasugur taluk

Krishna Bhagya Jala Nigam Limited

KBJNL Division NLBC Divn No 4 Rodalabanda | Raichur, Karnataka

Amount: ₹42.4 LCloses: 29 Sept 20262d left

Timeline

Published19 Sept 2026
Closes29 Sept 2026

Tender Value

₹42.4 L

EMD Value

₹85,000

Closing Date

29 Sept 2026, 5:00 pm2d left

Tender Inviting Authority

Office Inviting Bids

Krishna Bhagya Jala Nigam Limited

Contact Person

EXECUTIVE ENGINEER

Mobile Number

Work Description

Improvements to NLBC division office building and furnitures, and equipments at rodalabanda camp in lingasugur taluk

Tender Information

Tender ID

KBJNL/2026-27/IW/WORK_INDENT3755

Reference Number

KBJNL/2026-27/IW/WORK_INDENT3755

Tender Type

Open

Product Category

Irrigation and Other Works

Form of Contract

Electronic Documents, First(One Cover)

Location

KBJNL Division NLBC Divn No 4 Rodalabanda

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredA copy of requisite class of KPWD Contractor Registration certificate as mentioned in Column No.7 of above table

RequiredEmployees Provident Fund Registration certificate.

RequiredA copy of G.S.T. Registration certificate.

RequiredA copy of PAN Card

RequiredCopy of Income Tax returns filed mentioning PAN no. for the financial year 2025-26. Assessment year 2026-27

RequiredThe intending bidder shall upload self-attested letter pad mentioning latest Communication address, land phone and mobile Phone.

RequiredBID CAPACITY- The bidders who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total value. The available bid capacity is calculated as Assessed available Bid capacity- AxNx2.5 -B

RequiredTurnover-Required turnover should be achieved in at least two financial years a Minimum financial turnover of Rs.50.00 Lakhs is Equal to amount put to tender and updated to the financial year in which the tenders are invited.Financial turnover of previous years shall be given a weight of 10percent per year to bring them to the price level of the financial year in which the tenders are invited.Turnover is considered from 2021-22 to 2025-26

RequiredWorkdone-Satisfactorily completed at least 90PERCENT as prime contractor at-least one such similar work of Canal lining and Structure Works class of worK value not less than Rs.25.00 lakhs 50PERCENT of of amount put to tender

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

The intending bidders are advised to visit the site of work before submitting their tenders.

The contractor/authorized signatory should attach his/her scanned signature to the Schedule-B before uploading the documents.

If any of the dates mentioned above happen to be a general holiday, the next working day holds good.

Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever.

Any Modification/clarification will be published in the kpp portal. The bidders are advised to visit the portal regularly.

They should abide by the directions of Government towards recovery of 1% (or as modified by Govt. from time to time) Cess from the contractors bill under the provisions of building and other constructions worker welfare Cess Act 1996. They should abide by the directions of Government towards recovery of 1% (or as modified by Govt. from time to time) Cess from the contractors bill under the provisions of building and other constructions worker welfare Cess Act 1996.

Successful bidders should execute the agreement within 05 days from the date of approval intimated. If the contractor fails to enter into the agreement within the said period, the EMD of the contractor shall be forfeited and action shall be initiated for barring to participate in the tender of KBJNL.

Contractor shall bear the service tax as per the reverse charge mechanism as per Government of India Notification No 30/2012 Service Tax Dated 20-6-2012 and any modifications/charges notified by the Government of India from time to time and on date of payment.

Agency should complete the work within the stipulated tender period, if fails action will be initiated as per tender conditions.

During the time of technical evaluation, if the employer finds that any Certification/ information furnished is false, such bidders will be disqualified and barred from participation in the bid

The intending bidder shall upload self-attested letter pad mentioning latest Communication address, land phone & mobile Phone.

Scope of work and other conditions are as mentioned in the tender documents.

Not with standing anything stated above, KBJNL reserves right to assess the bidder capability and capacity to perform the contract, if the circumstances warrant such assessment in the overall interest of KBJNL

The Photographs of all the Closure and Special repair works before commencement, during and after completion of works are taken up for records and reference in digital mode with dates. The photographs should be taken in such a way that it reflects the damage that is to be tackled include the Engineer-in-charge of work standing near the reach, and the photo after completion of the work should be in the same chainage as taken after completion of the work should be in the same chainage as taken before the commencement of the work. One copy of the same shall be enclosed to the bills submitted for payment.

Royalty recovery will be made as per relevant Government orders.

Further information can be had from the undersigned during office hours.

If any bidder fails to satisfy the conditions mentioned above, such bids shall be rejected

They should abide by the directions of Government towards service tax as applicable by reverse charge mechanism.

The agency should establish a well equipped field laboratory at his own cost to conduct day to day tests on various construction Components at site.

Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years The Financial Statement shall be certified by a practicing chartered accountant bearing UDI number generated on UDI portal of the Institute of Chartered Accountants of India,and the same shall be counter checked on the ICAI portal

If bidder found involved in Corrupt or Fraudulent practices will be blacklisted.

As per Govt order No: DPAR 06 PSR 2024 dated:20.05.2024 it should be implemented

The statement showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the employer in charge, not below the rank of Executive Engineer or equivalent.

Even though the bidders meet the above criteria, they are subject to be disqualified if they have Made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and or. Record of poor performance such as abandoning the works, not properly completing the Contract, inordinate delays in completion, litigation history, or financial failures etc.and or.Participated in the previous tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification. If the bidder / bidders have participated in more than one work, the available tender capacity will be assessed and number of works will be awarded as per his available bid capacity.

The successful bidder shall furnish within 5 days from issue of letter of intent before entering into agreement (1) Copy of Income Tax returns filed mentioning PAN and TAN for the financial year 2025-26 (Assessment year 2026-27) failing which the EMD amount will be forfeited and the tender will be rejected and the bidder shall be liable for subsequent penal action including black listing.

The amount put to tender is Exclusive of GST and the tenderer should quote Excluding GST.

The bids of all bidders who have uploaded the tender along with all relevant documents will be considered in the bid evaluation. However, prior to awarding of the work, the L-1 bidder would be asked to produce the Additional performance security deposit for un-balanced tenders in the form of DD/Banker Cheques/FDR/BG & original documents in support of the uploaded documents before enter into agreement. If the L-1 bidder fails to produce the original documents before entering into agreement, then his bid will be treated as non-responsive bid as per clause 26(1) of the KTTP Rules. The bidders who does not produce the original documents will be barred from participation in any of the tenders to be invited by KBJNL apart from forfeiting the EMD, paid through e-cash

Fee & Financial Details

Tender Fee Amount

₹1,060

EMD Fee Amount

₹85,000

Important Dates

Last Activity

19 Sept 2026

Published

19 Sept 2026

Download Ends

23 Sept 2026

BOQ Preview

•

Improvements to NLBC division office building and furnitures, and equipments at rodalabanda camp in lingasugur taluk

•

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area Complete with all lead...

•

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area .Asbestos cement sheet Complete with all lead, lifts, loading & unloadi...

•

Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking to the appropriate disposal area . Of sectional area 40 cm² and above Complete...

•

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area . Of area 3 m² and be...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

•

Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers ...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and si...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawin...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 300mm Complete with all lead, lifts, loading & unloading charges, cost ...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 300mm Complete with all lead, lifts, loading & unloading charg...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 200x10mm Complete with all lead, lifts, loading & unloading charges...

•

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. Complete with all lead, lifts, loading & unloading charges, cost and conveyance of all materials,...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 125x64x1.90mm Complete with all lead, lifts, loading & unloading charges, cost and conveyan...

•

Painting wood work with Deluxe Multi Surface Paint of requiredshade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give ...

•

PProviding & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elast...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops a...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622,of approved make,in all colours,shades, except ...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pip...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing & supplying Plastic Bucket of 25 L & Mug of 1.5 L capacity in sets as per direction of Engineer in charge of work Complete with all lead, lifts, loading & unloading charges, cost and conveya...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

•

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes...

•

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore Complete with all lead, lifts, loading & unloading charges, cost and...

•

Supply of acer High End Desktop Computer with Warranty 3 Year -acer (Veriton M4715G) -Desktop Computer with TableMount Monitor System with Compatible Chipset as per Processor make with Minimum 6USB Po...

•

Supply of HP laptop Higher Processor Number-Intel Core U7- 7155U, Factory Pre-loaded OperatingSystem-Window 11 ,RAM Size (Memory Card/Module)(in GB) (Capacity to be Installed inthe System)-16GB, Prima...

•

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

•

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way SwitchComplete with all lead, lifts, loading & unloading charges,...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket Complete with all lead, lifts, loading & unloading charg...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Complete with all lead, lifts, loading & un...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch Complete with all lead, lifts, loading & unloading charg...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Complete with all lead, lifts, loading & unloading ch...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Bakelite Ceiling Rose Complete with all lead, lifts, loading & unloading charges, cost and conveyance of a...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Batten Holder Complete with all lead, lifts, loading & unloading charges, cost and conveyance of all mater...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicatorON/OFF,energycross-3 with Short circuit breaking capacity...

•

Supplying and fixing regular MCB distribution boards on wall/ood board/ flush mounting using required clamps, bolts, nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3 pha...

•

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of s...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Fixing a ceiling /wall mounting fan of all capacities and all types,with necessary clamps and 'S' hook made out of 15mm dia MS rod,with 5A.ceiling rose of approved quality with necessary length of 23/...

•

Fixing all types and all capacities of fluorescent/false ceiling/spotlight/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required Nos o...

•

Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70percentage lumen maintenance with CRI80.Power Input 220 240V at 50/60Hz & Powe...

•

Supplying ......TR split Air conditioners suitable for operationon A/C supply single phase 50Hz 230Vwith hermetically sealed compress or with air cooled condenser,motor capacitor and start run capacit...

•

Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. upto ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

DTP 3755 NLBC DIVISION.docx

Tender Document • 0.92 MB

Nlbc Division notifivction.docx

Instructions to Tenderers • 0.07 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Irrigation and Other Works

Improvements to NLBC division office building and furnitures, and equipments at rodalabanda camp in lingasugur taluk

Krishna Bhagya Jala Nigam Limited

KBJNL Division NLBC Divn No 4 Rodalabanda | Raichur, Karnataka

Amount: ₹42.4 LCloses: 29 Sept 20262d left

Timeline

Published19 Sept 2026
Closes29 Sept 2026