Loading
Loading…
Loading…
Tender Value
₹40,684
Closing Date
29 Sept 2026, 6:55 pm2d left
Executive Engineer
Executive Engineer Mechanical and Hospital Division Baramulla
Preventive /Corrective maintenance of Snow Cat 120 HP JINAN GATO (U) pertaining to Mechanical and Hospital Sub-Division 1st Baramulla to keep machine for ensuing winter season 2026-27
2026_PWDJK_325564_1
MHDB/TS/2026-27/87
Open Tender
Repair and Maintenance Works
Percentage
10 days
Baramulla
Please refer Tender documents.
8 documents required · 8 mandatory
₹200
Executive Engineer, MHD Baramulla
22 Sept 2026
22 Sept 2026
30 Sept 2026
22 Sept 2026
29 Sept 2026
22 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Preventive maintenance by way of carrying out following jobs:
1. Providing & Filling of M-Oil 15W40 (15 Ltrs@380/ltr) = 5700
2. Providing and filling of Coolant (Antifreeze) (3 Ltrs @ 350/ltr) = 1050
3.Providing & Fitting of M-oil Filter (01 Set @ 1650) = 1650
4.Providing & Fitting of Diesel Filter (01 Set @ 1250) = 1250
5.Hydraulic oil filter = (01 No @ 1850) = 1850 | 1 | Job | 11,500 | ₹11,500 |
| 2 | Electrical repairs to snow cat by mean of P/F and fitting Led Fog lamps (06 Nos), Cabin Light (01 No), Rear Lights (02 Ns), Rear Working lights and replacement of damaged wiring, Wiper arm and blade (01 set). The job includes P/F of 12 V emergency siren provision by way of providing / fitting 12V with allied accessories including wiring, fuses and toggle switch. Further job includes p/f of multi point mobile charger with C & D type cables of reputed make. | 1 | Job | 5,000 | ₹5,000 |
| 3 | Repairs to the self-starter assembly by way of dismantling of complete self-starter assembly from the said machine. The job includes shifting of assembly from site to workshop for necessary repairs to solenoid switch, replacement of self-rocker, rewinding of armature coil (if necessary) and soldering wherever required. The job includes providing and fitting of new carbon brush set and cleaning of whole assembly. After necessary repairs the repaired assembly unit shall be shifted back to site and remounted into the machine. The job also includes testing of repaired assembly for proper functioning. All tools/tackles/carriage/labour etc required for the job are included. | 1 | Job | 5,500 | ₹5,500 |
| 4 | Fabrication, P/F of door glass of finished size 55"X 37" compatible with existing door profile fabricated out of 08mm laminated glass consisting of two sheets of glass bonded by polyvinyl buryl plastic inner layer, toughened, tempered. The job also includes fitting of glass in complete door profile with new lock, handle, hinges rubber fitting and proper waterproofing. Complete job. | 1 | Job | 14,000 | ₹14,000 |
| 5 | P/F of side view mirrors on both sides of the machine, complete with mounting base, brackets and all necessary fittings as per sample, complete in all respects. | 1 | Job | 1,800 | ₹1,800 |
| 6 | Providing of 30 Ltr HSD @96.14/ltr= 2884.2 for Testing of machine and general checkup after completion of Job. | 1 | Job | 2,884 | ₹2,884 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.62 MB
BOQ_1100502.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .