REPAIRS TO SEWAGE LINE, SEPTIC TANK, SOAK WELL, MANHOLE AND OTHER MISC WORK IN THCH AREA AT AF STN BHUJ

Amount

Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided for and removing debris outside the MD land complete all as specified and directed by Engineer-in-Charge.

Material & labour for reinforced cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge. . Note : Reinforcement shall be measured and paid separately.

Material & labour for providing precast reinforced cement concrete type A1, 1:2:4 using 20mm graded aggregate as in landings, cover slabs (for man holes etc) and similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match including use of necessary formwork and demolition / taking up of existing cover slabs & removing rubbish outside MD land complete all as specified and directed by Engineer-in-Charge. Note : Reinforcement shall be measured and paid separately.

Supply & fix TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.

Supply & fix TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.

Material & labour for formwork to sides and soffits of suspened slabs such as roof slabs, floor slabs, ladings and similar work, not exc. 200mm thick (horizontal or sloping) of rough finished concrete surfaces. complete all as specified and directed by Engineer-in-Charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, rough finished concrete surfaces complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n.exc. 10 sqm on plan and n exc 1.50m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches n exc 1.5 mtr wide and exc 1.5 mtr deep for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n.exc. 10 sqm on plan and exc 1.50m but n exc 3.0 m in depth and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n.exc. 10 sqm on plan and n exc 1.50m in depth and getting out in soft/disintegrated rock complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches n.exc 1.5 mtr wide and exc 1.5 mtr and n exc 3.0 mtr deep for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n.exc. 10 sqm on plan and exc 1.50m but n exc 3.0 m in depth and getting out in soft/disintegrated rock soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/disintegrated rock complete all as specified and directed by Engineer-in-Charge.

Removal of excavated material (soils/soft disintegrated rocks) to a distance n.exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge.

Material & labour for providing cement concrete 1:3:6 type C-2 bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engineer-in-Charge of following size :-

150mm bore

200mm bore

250mm bore

300mm bore

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar including the pipe inserted in Man holes walls etc. for undermentioned drain pipes, including removal of rubbish outside MD land complete all as specified and directed by Engineer-in-Charge of following size :-

150mm bore

200mm dia bore

250mm dia bore

300mm dia bore

M & L for Underground drainage double wall corrugated HDPE pipe 150 mm dia SN4 confirming to IS : 16098(PART II) single socketed in any length laid in trenches or floors etc all as specified

Material & labour for reinforced concrete pipes, 150mm bore, class NP-2 laid and jointed complete with collars complete all as specified and directed by Engineer-in-Charge.

Material & labour for reinforced concrete pipes, 250mm bore, class NP-2 laid and jointed complete with collars complete all as specified and directed by Engineer-in-Charge.

Material & labour for reinforced concrete pipes, 300mm bore, class NP-2 laid and jointed complete with collars complete all as specified and directed by Engineer-in-Charge.

Material & labour for pumping and bailing out sludge and alike components from septic tanks, soakage pit and alike and removing the same to out side MD land complete all as specified and directed by Engineer-in-Charge.

Desilting / desludging /cleaning of man holes of any size n.exc 1.5 m in depth and removing all blockage from manholes such as plastic pieces, soil etc complete all as specified and directed by Engineer-in-Charge (Note:- Including removing of blockage of WC (Indian or EWC), urinal, bath and kitchen, gully trap incl of pan, floor trap and removing blockage of down pipe upto 1st manhole complete all as specified and as directed by E-in-C.)

Desilting / desludging /cleaning of man holes of any size exc 1.5 m but n. exc. 3.0 m in depth and removing all blockage from manholes such as plastic pieces, soil etc complete all as specified and directed by Engineer-in-Charge (Note:- Including removing of blockage of WC (Indian or EWC), urinal, bath and kitchen, gully trap incl of pan, floor trap and removing blockage of down pipe upto 1st manhole complete all as specified and as directed by E-in-C.)

Cleaning of drain pipes of size 150mm bore by means of rodding ie by bamboo sticks or steel rods and removing all the blockage material from pipe line complete all as specified and directed by Engineer-in-Charge.

Cleaning of drain pipes of size 200mm bore by means of rodding ie by bamboo sticks or steel rods and removing all the blockage material from pipe line complete all as specified and directed by Engineer-in-Charge.

Cleaning of drain pipes of size 300mm bore by means of rodding ie by bamboo sticks or steel rods and removing all the blockage material from pipe line complete all as specified and directed by Engineer-in-Charge.

Cleaning of floor traps /Gully traps of any description and removing all the blockage material complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete of any description and in any position not other wise specifically provided for and removing debris outside the MD land complete all as specified and directed by Engineer-in-Charge.

Material & labour for providing PCC 1:3:6, type C-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass complete all as specified and directed by Engineer-in-Charge.

Demolition of precast concrete block walling built in cement morter complete all as specified and directed by Engineer-in-Charge.

Material & labour for precast cement concrete block masonary with solid blocks exc 10cm in width type C1 (1:5:8) (using 20mm graded stone aggregates) and setting in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material & labour for providing cement concrete type B1, 1:2:4 mix using (20mm graded stone aggregate) as in copings including necessary use and waste of form work complete all as specified and directed by Engineer-in-Charge.

Material & labour for providing cement concrete type C1, 1:3:6 mix (using 20mm graded stone aggregate) as in benching in manholes including necessary use and waste of form work complete all as specified and directed by Engineer-in-Charge.

Material & labour for providing cement concrete type B2, 1:2:4 mix using (40mm graded stone aggregate) as in surface channels and drains including necessary use and waste of form work complete all as specified and directed by Engineer-in-Charge.

Dismantling of cast iron, PVC or reinforced concrete pipes jointed in cement mortar/solvent cement etc. and taking out of trenches if required complete all as specified and directed by Engineer-in-Charge of following size:-

100/110mm bore

75mm bore

Supply & fix UPVC ultra drain, self it pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors complete all as specified and directed by Engineer-in-Charge of following size:-

110mm bore

75mm bore

Supply & fix UPVC junction single 'Tee' equal with access door opening, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge of following size:-

110mm bore

75mm bore

Supply & fix PVC bend equal of any radius with door, ISI marked, IS-14735, jointed with solvent cement for 75mm bore pipes complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm bore pipes complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC cowl for 110/75mm size pipes, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs of PVC gully trap 150x110mm,setting and jointing with solvent cement including dismantling of surrounding concrete and fixing of gully trap with and including cement sand mortar 1:3 complete all as specified and directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Material & labour for 10 mm thick rendering on vertical surfaces in cement mortar 1:4 as backing coat complete all as specified and directed by Engineer-in-Charge.

Material & labour for 25mm thick cement concrete type BO 1:2:4 using 12.5mm graded aggregate in floors complete all as specified and directed by Engineer-in-Charge.

Material & labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified and directed by Engineer-in-Charge.

Material & labour for glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and directed by Engineer-in-Charge. (Note:- backing coat screed paid seperately)

Supply & fix waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix vitrious china squattin pan ,orrissa pattern size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge.

Supply & fix cast iron 'P' or 'S' traps for 100 mm bore of pipe complete all as specified and directed by Engineer-in-Charge.

Supply & fix grating square 150mm size of PTMT (minimum weight 100 gms ) complete all as specified and directed by Engineer-in-Charge

Material & labour for 75mm dia PVC SWR with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4 ) complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, bll valve, flaot and handle including brackets of 10 Ltr capacity complete all as specified and directed by Engineer-in-Charge.

Material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces complete all as specified and directed by Engineer-in-Charge

Material & labour for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

Material & labour for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge

Complete removal of existing treatment on ceiling surfaces and applying two coats of white wash by finishing the surfaces even and smooth complete all as specified and directed by Engineer-in-Charge

Material & labour for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted including one coat of wall care Putty by finishing the surfaces even and smooth complete all as specified and directed by Engineer-in-Charge

Complete removal of existing treatment on wall surfaces and applying two coats of distemper with distemper oil emuision, white or tinted including one coat of wall care putty by finishing the surfaces even and smooth complete all as specified and directed by Engineer-in-Charge

Material & labour for 75 mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base under interlocking tiles complete all as specified and directed by Engineer-in-Charge

Material & labour for precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade glossy rubber moulded with grey cement an no pigments laid dry over 30 mm compacted sand bed, size & pattern of tiles complete all as specified and directed by Engineer-in-Charge . (Note:- Sand cushioning paid seperately)

Material & labour for sand filling under floors, cushioning of interlocking tiles, chequered tiles or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge Note:- Punned sand thickness will be measured for payment

Supply & fix in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including fixing bolts and Plastic water closet seat ( black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified and directed by Engineer-in-Charge.

Supply & fix vitreous china urinals, bowl type flat back, size 465X355X265mm white (minimum), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; (Excluding flushing cistern and waste pipe ) complete all as specified and directed by Engineer-in-Charge.

Taking up or down following size of steel tubing complete all as specified and directed by Engineer-in-Charge:-

15mm bore

20mm bore

25mm bore

S&F CPVCpipes ISI marked IS 157778 with all fitting for hot and cold water fixed with solvent cement complete to walls and ceiling or laid in floors of following sizes ( SDR 13.5 of make:- astral or equivalent of supreme / finolex )

20mm bore of pipe

25mm bore of pipe

32mm bore of pipe

Supply & fix in repairs shower rose150mm dia, cast copper alloy, chromium plated, screwed end for iron pipe or for unions of 15 mm dia, swivel joint complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair PVC flexible waste pipe (heavy duty) 40 mm for fixing to WHB with long screwed shanks and fly nut flanged. complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs for bib taps, fancy type, cast copper alloy with crutch handle, cromium plated, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs stop valve 15 mm dia, cast copper alloy, chromium plated, high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC connection 450mm long with check nut for wash hand basin/ flushing cistern etc complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs vitreous china wash basin, white, flat back, size 550mm x 400mm, including provision in replacement of brackets, Pillar taps (cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe, fancy type), Waste fittings ( brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed), PVC connections (15mm size with PTMT nuts of length 450mm) and waste pipe of 32mm dia UPVC pipe approximately 1.5m in length complete all as specified and directed by Engineer-in-Charge.

S&F for MS framed work by fabrication such as grills, gratings, etc, with ends of bars shouldered and/ or riveted, or forged into spike, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railing framed of water tanks etc including portions framed and hung as gated including pintle hinges, stops, handmade sliding bolts etc conforming to Fe-290, Gde-E-165, complete all as specified and directed.

Taking out soil settled in bed of drain by means of excavation including removing glass, small bushes, shrubs etc and removing the excavated materals to distance exc 50 m but n.exc 100m and deposited were complete all as specified and as directed by Engineer-in-Charge.

M & L for 75mm thick cement concrete type C1, 1:3:6 (20mm graded aggregate), as in path/ plinth protection and finished cement concrete surface even and smooth without using extra cement.

Supply & Fix in repairs Fibreglass reinforced plastic (FRP) manhole cover Square size 600mmx600mm/900mmx900mm and adherence to standars like BS EN 124 material properties like impact and chemical resistance complete all as direc ted.

Supply & Fix in repairs Fibreglass reinforced plastic (FRP) manhole cover Square size 900mmx900mm and adherence to standars like BS EN 124 material properties like impact and chemical resistance complete all as direc ted.

M&L Cutting holes into or through brick walls n exc 150 sq. cm sq. cm built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required

S &F 100/110mm stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

Taking down cement of lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 15mm thick in CM 1:4 mixed with water proofing compound on PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. (Note : Supply only WPC will be measured and paid separately)

Material & labour for reinforced concrete pipes, 200mm bore, class NP-2 laid and jointed complete with collars complete all as specified and directed by Engineer-in-charge.

Supply only inetergal water proofing compound ( ISI marked) complete all as specified and directed by Engineer-in-Charge.

BHAVANI PROVISION STORES (BID ID -3515583)

ASHAPURA CONTRACTOR (BID ID -3510439)