Fabrication Work under Bhuj DO

Memorandum showing the items of works to be carried out Labour work for Fabrication (Item

wise) as per New Drawing and specification work under Bhuj Division.

Sr. Cost GST@18 % Cost

Name of fabricated item Unit

No. Without In RS with

GST in RS GST in

1 11KV V-CROSS ARM NO 46.42 8.36

2 HT TOP CLAMP (FOR PSC POLE) NO 14.59 2.63

3 HT TOP CLAMP (FOR GIRDER POLE) NO 14.59 2.63

4 D CLAMP (FOR PSC POLE) NO 7.17 1.29

5 TAPPING ANGLE NO 17.92 3.23

6 ANGLE BARA NO 6.63 1.19

7 GUARDING ANGLE NO 17.92 3.23

8 EARTHING COIL NO 11.95 2.15

9 C CLAMP NO 5.97 1.07

10 GUY ROD NO 19.12 3.44

11 TURN BUCKLE NO 15.53 2.80

13 GUY CLAMP PAIR 13.26 2.39

14 S.S. SET 11 PIECE FOR 10 KVA & 16 KVA T/C SET 238.96 43.01

S.S. SET 29 PIECE FROM MS CHANNEL & ANGLE FOR

25,63,100 & 200 KVA T/C FOR CITY (FOR PSC & GIRDER SET 418.18 75.27

S.S. SET 21 PIECE FROM MS ANGLE FOR 25,63 & 100 KVA

T/C FOR RURAL (FOR PSC & GIRDER POLE) 358.44 64.52

17 5 KVA T/C S.S.SET(FOR PSC & GIRDER POLE) SET 412.21 74.20

18 3 HOLE PATTI NO 3.98 0.72

19 HT PROJECTION SET SET 218.83 39.39

20 LT PROJECTION SET SET 197.14 35.49

21 HT-LT COMBINE PROJECTION SET SET 251.98 45.36

22 LT CROSS ARM 2.5 FEET NO 23.9 4.30

23 LT CROSS ARM 3.5 FEET NO 23.9 4.30

24 LT CROSS ARM 4 FEET NO 23.9 4.30

25 LT CROSS ARM 4.5 FEET NO 23.9 4.30

26 Fabrication of T-Formation NO 67.00 12.06

27 Fabrication of MS Angle 9/0 TOP NO 48.00 8.64

28 Fabrication of Straight Cross ARM NO 28.00 5.04

29 Fabrication of MS Channel 9/0 TOP NO 48.00 8.64

30 Top ANGLE/CHANEL 9 FEET NO 40.00 7.2

31 BOTTOM ANGLE 9 FEET NO 23.00 4.14

32 DO ANGLE SUPPORT ANGLE 2’6’’ NO 8.00 1.44

33 BELTING SUPPORT ANGLE 2’ NO 8.00 1.44

34 BRACING ANGLE NO 8.00 1.44

35 T FORMATION NO 67.00 12.06

36 SHACKLE DP ANGLE 7’6’’ NO 23.00 4.14

37 STRAIGHT CROSS ARM NO 20.00 3.6

38 Fabrication of ANCHOR ROD From 50*6/*6/65*65*6 mm NO 16.00 2.88

39 Fabrication of LT D Clamp from 50*6 mm2 MS Flat one hand NO 5.00 0.9

40 Fabrication of STAY CLAMP (B) with one hand red oxide PAIR 10.00 1.8

Fabrication MS Angle 4’6’’ tapping angle from NO 15.00 2.7

42 Fabrication of Top Fitting from 65*65*6 mm MS angle NO 7.00 1.26

Fabrication of 11 LV top Angle 9’ from 65*65*6 NO 40.00 7.2

Fabrication of 11KV top channel 9’ from NO 48.00 8.64

Fabrication of 11KV bottom channel 9’ from NO 40.00 7.2

46 Fabrication of STAY CLAMP (T) with one hand red oxide PAIR 10.00 1.8

47 FABRICATION CHARGES FOR MS ANGLE 9’0 BELTING NO 21.00 3.78

48 FABRICATION OF ANGLE SUPPORT NO 8.00 1.44

49 FABRICATION OF VARIOUS STAY CLAMP GIRDER POLE PAIR 10.00 1.8

50 Side clamp DO 2601000157 NO 5.00 0.9

51 Side clamp belting 2601000158 NO 5.00 0.9

52 FABRICATION CHARGES FOR SIDE CLAMP (TOP) NO 5.00 0.9

53 FABRICATION OF VARIOUS STAY CLAMP PAIR 10.00 1.8

54 FABRICATION OF VARIOUS SIZE LONG ANGLE 2’6 50*50*6 NO 8.00 1.44

55 Providing 6 extra holes of 10 mm size in 9 top angel of T/C set NO 12.00 2.16

56 Providing 6 extra holes of 10 mm size in 9 top angel of T/C set NO 12.00 2.16

Total Amount of Tender Rs. 29,99,000.00/-

Total Amount of Tender Rs. 29,99,000.00/-

Amount in word:- Twenty Nine Lakhs Ninty Nine Thousand only.