Overhauling job of Boiler Pressure Parts of Unit 5 under BMD. STPS, WBPDCL.

Amount

BOILER EXTERNAL CLEANING BY AIR AND FIRE WATER.

SCAFFOLDING OF FURNACE ZONE & PLATEN SH

SCAFFOLDING OF FSH,R/H,LTSH & ECONOMISER ZONE.

SCAFFOLDING FOR CHECKING OF HANGER & SUPPORTS OF BOILER AREA & CHECKING & REPAIRING OF BOILER BUCKSTAY.

CLEANING OF BOILER PRESSURE PARTS (FURNACE,PLSH,FSH,RH ZONE) BY H.P. WATER JET.

CLEANING OF BOILER 2ND PASS BY FIRE WATER JET.

De-METERING OF BOILER TUBES UNDER PRESSURE PARTS.

LIFTING AND REFITTING OF LTSH MODULE (1 Module= 2 no upper coils and 2 no lower coils).

LIFTING OR LOWERING AND TAKING OUTSIDE AT DESIGNATED REPAIRING SITE & REFITTING OF ECONOMISER MODULE (1 Module= 2 no upper coils and 2 no lower coils).

WELDING JOINTS FOR INSERTION OF TUBES IN ECONOMISER COIL,LTSH COIL & STEAM COOL WALL.

WELDING JOINTS FOR INSERTION & RECTIFICATION OF TUBES IN FSH, PLSH, R/H COILS.

WELDING JOINTS FOR INSERTION OF FURNACE WALL TUBE INCLUDING SCREEN TUBE.

ALIGNMENT OF FSH,PSH,RH COILS

RADIOGAPHY OF HIGH PR WELDING JOINTS

LTSH HEADER STUB JOINT RECTIFICATION/ REPLACEMENT.

ECONOMISER HEADER STUB JOINT RECTIFICATION/REPLACEMENT.

D. P. TEST OF STUB JOINTS,ATTACHMENT JOINTS & REGULAR WELDING JOINTS.

DEPOSITION OF WELD METAL ON TUBES, STUBS HEADERS ETC.

STRESS RELIEVING FOR PRESSURE WELDING JOINT.

FABRICATION OF DIFFERENT SIZE BENDS

REMOVAL AND REFITTING OF GUARD TUBE AND PERFORATED GUARD PLATE FOR LTSH, ECONOMISER , CAGE WALL , FURNACE WALL SCREEN TUBE, SPACER TUBE ,STEAM COOLED WALL.

OVERHAULING OF BOILER DRUM

OVERHAULING OF TROUGH SEAL

INSPECTION & REPAIRING OF PENT HOUSE, DOG HOUSE, DEAD CHAMBER,BOTH SIDE WINDBOX & ECO HOPPER.

SKIN CASING & FINS WELDING

SERVICING & TRIVY TEST OF DRUM,MS,CRH & HRH SAFETY VALVES SAFETY RELIEV VALVES.

SAFETY VALVE SEAT CUTTING.

SERVICING OF SOOT BLOWER SAFETY VALVE , ERV ,ERV MANUAL ISOLATING VALVE WITH EQUALIZER VALVE.

TOTAL ASH CLEANING OF BOILER INTERNAL

REPLACEMENT OF HP VALVE SIZE UP TO 50 MM

REPLACEMENT OF HP VALVE SIZE 50 MM TO 100 MM.

REPLACEMENT OF HP VALVE SIZE ABOVE 100 M

ASSISTANCE JOB IN BOILER PRESSURE PARTS AREA.

BOILER TUBE OXIDE SCALE THICKNESS MEASUREMENT.

HIRING OF 01 NO HYDRA/CRANE (CAPACITY 14 TON ) WITH OPERATOR & FUEL.

HIRING OF BOILER HYDRO PUMP (RECIPROCATING PUMP) FOR BOILER HYDRO TEST.

SUPPLY OF NDT LEVEL-II EXPERT SERVICE ENGINEERS (02 PERSONS).

OT FOR SUPPLY OF NDT LEVEL-II EXPERT SERVICE ENGINEERS (02 PERSONS).

SUPPLY OF EX BHEL EXPERT SERVICE ENGINEERS (02 PERSONS).

OT FOR SUPPLY OF EX BHEL EXPERT SERVICE ENGINEERS (02 PERSONS).

OVERHAULING OF HP VALVES UPTO SIZE 25 MM

OVERHAULING OF HP VALVES SIZE ABOVE 25 MM UP TO 50 MM.

OVERHAULING OF HP VALVES SIZE ABOVE 50 MM UP TO 100 MM.

OVERHAULING OF HP VALVES SIZE ABOVE 100 MM UP TO 200 MM.

OVERHAULING OF HP VALVES SIZE ABOVE 200 MM.

OVERHAULING OF LP VALVES SIZE UPTO 100 MM.

SERVICING OF ACTUATORS SIZE UP TO 100 MM

SERVICING OF ACTUATORS SIZE ABOVE 100 MM TO 200 MM.

SERVICING OF ACTUATORS SIZE ABOVE 200 MM

U.S. ENTERPRISES

P.E. ERECTORS PRIVATE LIMITED