REPAIR REPLACEMENT OF JOINERY AND FLOORING IN CERTAIN BLDGS OF TECH AREA AT AF STATION NALIYA

Amount

Taking down shutters of any description exceeding 1sqm but not exceeding 2 sqm each complete all as specified & directed.

Taking down shutters of any description exceeding 2 sqm each complete all as specified & directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each ( without taking off shutters from the frames) complete all as specified & directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames) complete all as specified & directed.

Taking down cement plaster on brick/ stone walls etc any description incl raking out joints, hacking for key, scrubbing down with water etc. complete all as specified & directed.

Desription all as per Srl Item 5.00 here-in-before but on ceiling

M&L for rendering 15 mm thick on other than fair faces of brick work in CM 1:6 finished even and smooth (without using extra cement) complete all as specified & directed.

M&L for rendering 15mm thick in CM 1:4 including WPC content shall be 3% by weight of cement on fair faces of brick/concrete walls, finished even and smooth (without using extra cement) complete all as specified & directed. NOTE: WPC shall be measured and paid seperately in respective item of BOQ.

M&L for rendering 10 mm thick on ceiling surface in cement mortor 1:3 complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

M&L for applying three coats of white wash on new plastered surfaces of wall including preparation of surfaces complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying two coats of oil bound distember complete all as specified and as directed.

M&L for applying three coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

M&L for rendering 10 mm thick cement plaster in cement mortar 1:3 on roof slab/ canopies/chajjas with water proofing compound @ of percentage as per manufacturer's instructions by weight of cement and making plastered surfaces to receive water proofing treatment (finished fair and even as directed) complete all as specified and directed. (Note:- Water proofing compound will be measured and paid for separetaly as supply only)

S&F in repair 500 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layer hoisted and fixed in position Including dismantling complete all as specified SSR Part-I and as directed.

S&F in repair 1000 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layer hoisted and fixed in position Including dismantling complete all as specified SSR Part-I and as directed.

S&F door closer hydraulically regulated design No 3 universal type of aluminium (extruded section) suitable for door shutter of 700 mm in width and of weight not more than 35 Kg and fixed complete all as specified & directed.

S&F 150mm long alluminium, anodised barrel tower bolts extruded section and fixed complete all as specified & directed.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified & directed.

S& F in repair tube 15mm bore medium grade, galvanised with all fittings , and fixed complete to walls and ceilling or laid in floors complete all as specified & directed.

Description all as per Srl item No.22.00 here-in-before but 20mm bore.

S&F in repair bib taps 15 mm dia cromium plated fancy type with crutch or butterfly handle screwed down and fixed in repairs complete all as specified & directed.

S&F in repairs 15mm dia stop valve cast copper alloy chromium platted screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes complete all as specified & directed.

S& F in repairs, 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly- nuts, screwed for iron pipe complete all as specified & directed.

S&F in repairs PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed.

S&F vitreous China wash down water closet pan (pedestral pattern) EWC including PVC seat cover closed pattern with hinging device and with jet spray with one metre long flexible pipe, all fittings complete all as specified & directed.

S&F PVC valve less syphonic action type flushing cistern of 10 lit capacity low level with inlet ball valve, float & handle incl brackets, flush pipe as reqd at site complete all as specified & directed.

S&F in repair vitreous china wash basin, white flat back, size 450x300mm including brackets, cutting for and pinning in ends of brackets or erecting stand incl 15mm bore, pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated. PVC connection 15mm dia 45cm long and 32mm dia PVC waste pipe and CP coupling complete all as specified & directed.

S&F in repairs 75 mm PVC (SWR) vent cowl complete all as specified & directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed.

M&L in repairs PVC (SWR)Gully trap of size 125/110mm bore setting and joining with solvent cement complete all as specified & directed.

M&L fix in repairs PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement complete all as specified & directed.

S&F in repairs 75 mm bore PVC (SWR) bends complete all as specified & directed.

S & F in repairs 110 mm bore PVC (SWR) bends complete all as specified & directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified & directed.

S&F in repair 5.5 mm thick tinted glass including rubber paking/gasket complete all as specified & directed.

S&F in repair 19 mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified & directed.

supply and laying in repair 16mm of CPVC pipes SDR 11 & plain CPVC SDR 11 fitting on walls/ceiling or laying in floor complete all as specified & directed.

supply and laying in repair 16mm of CPVC pipes SDR 11&plain CPVC SDR 11 fitting in trenches complete all as specified & directed.

supply and laying in repair 20 mm of CPVC pipes SDR 11&plain CPVC SDR 11 fitting on walls/ceiling or laying in floor complete all as specified & directed.

supply and laying in repair 20 mm of CPVC pipes SDR 11&plain CPVC SDR 11 fitting in trenches complete all as specified & directed.

Demolition of brick/stone/PCC block masonery work built in CM in any description in any position complete all as specified & directed.

M&L for precast concrete solid block masonry exceeding10 cm in width and setting in mortar complete, type C-2, 1:3:6 (by using 20mm graded crushed broken stone aggregate) set in CM 1:6 complete all as specified & directed.

Taking down aluminium shutter of any size and dismantling all members for repair/replacement of US members (Top rail, bottom rail, lock rail ) and refixing in the same opening complete all as specified & directed.

M&L for granite (of any type ) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L in repair for 60mm thick, M-35 Grade machine pressed precast conctete interlocking paver block With Grey cement and no pigment any shape and size confirming to IS 15658-2006 complete all as specified & directed.

M&L for Sand cushioning under floors as in foundations including watering and consolidation in layers each layer not exceeding 25cm thick complete all as specified & directed.

M&L 75mm thick Cement concrete type C-2, 1:3:6 (by using 40mm graded crushed broken stone aggregate) for sub base complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors, and pavings n.exc. 15 cm thickness (below or above GL) complete all as specified & directed.

M&L75mm thick cement concrete type C-2 ,1:3:6 (by using 40mm graded crushed broken stone aggregate) for plinth protection finished even and smooth without using extra cement complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding; removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M&L 25 mm thick cement concrete type B-0, 1:2:4 (by using 12.5mm graded crushed broken stone aggregate) for sub base complete all as specified & directed.

M&L joint free non skid ceramic coloured tiles 7mm to 8 mm thick area of each tile exceeding 18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick bedding layer in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles (300x200mm) x 7mm to 8 mm on vertical surfaces such as skirting,dados and risers to steps etc,set and jointed in cement slurry and pointed in white cement to match including 10mm thick back coat in CM 1:4 complete all as specified & directed.

M&L for joint free Non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) size of tiles 400X400 mm in floors etc . set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick bedding layer in CM 1:6 complete all as specified & directed.

M&L for IInd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed complete all as specified & directed.

M&L PCC 1:3:6 type C-1 (by using 20mm graded crushed broken stone aggregate) as in providing, cement concrete in lintel up to 1.5m clear span, cills, steps, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs complete all as specified & directed.

S&F 35mm thick, plain framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part - I), kiln seasoned and chemically pressure treated complete all as specified & directed.

S&F 35mm thick, IInd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc complete all as specified & directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified & directed.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC "C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing and as directed.

M&L for preparation of newly wooden surfaces of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

S&F in position anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame, partly glazed with 5.5 mm thick tinted glass and partly panelled with 9 mm thick both side decorative prelaminated particle board exterior grade including rubber bead, joining cleat for fixing, aluminium door handle 150 mm size and tower bolt 200 mm size, double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, Mortice lock vertical type of mild steel 4 levers of size 100mm etc all as mentioned here in below, complete all as specified and directed :- (a) Frame (top & side) section-101.60 x 44.75 x 2.4 mm (Section No 14021) (b) Vertical Members of shutter Section-85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section - 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section - 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section -150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass - 0.80 mm thick (Section No 19370). Note: Section Nos. given above are of the make Jindal, Contractor may use similar section of other make mention in Appx B.

S&F powder coated aluminium Three track sliding window comprising of one fly proof shutter and two glazed shutters with window frames of size 92mm x 31.63mm x 1.50mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement and with aluminium Deco grill DG/01 7x4.5mm thick, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item. (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples shall be deemed to be included in the quoted rate for the item. (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint shall be deemed to be included in the quoted rate for the item.

S&F powder coated aluminium ventilator shutters with frame (aluminium section weighing 0.55Kg/m), fixed with out sash bars, openable type (Top hung double shutter) and glazing complete with 5.5mm thick coloured/tinted sheet glass and Aluminium wire mesh with necessary clips, hinges, aluminium(anodised) peg stay 30 cm long-01 No. with aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications (Make: Grill No. 20 of 'DECO GRILL' or equivalent) complete all as shown on drg No. CEAA/64 all as specified and as directed.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repair aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of size 200 mm long of extruded section and fixed complete all as specified and directed

S&F in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F in repair extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F, 250mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt tyoe) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S&Fin repair 250mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt tyoe) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S & F 140mm floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring ,fixed in floor complete as all as specified and directed.

S & F in repair 140mm floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring ,fixed in floor complete as all as specified and directed.

S & F MS ordinary rat tail rod of size 300mm pattern springs including roller and roller plate complete as all as specified and directed.

S & F in repair MS ordinary rat tail rod of size 300mm pattern springs including roller and roller plate fixed to stone/ concrete chowkats with flat iron 40x3 mm size 75 cm long with necessary bolts, etc complete as all as specified and directed.

S&F 5.5mm thick black tinted glass ordinary quality in square exc 0.5 Sqm each complete all as specified and directed.

S&F in repair harrison rail,mild steel,chromium plated with fixing brackets suitable for size 20mm dia curtain rods fixed with chromium plated screws complete all as specified & directed.

S&F in repair for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F in repair for Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F in repair 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc with L-type or J-type or cranked hook bolts complete all as specified & directed.

M&L roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Gde Fe 410-W (Gde- E-250) Qty-A including dismantling complete all as specified & directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified & directed.

M&L for preparation for painting over new steel surface of any description exceeding 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified & directed.

M&L for false ceiling of gypsum board 12mm thick fixed over grid of size 600mm x 600mm made with GI channel for main runner (along short span ) of size 50mm x 50mm x 0.35mm thick and cross runner (along long span) of size 45mm x 12mm x 0.35mm. Main & cross GI runner (in any pattern/design as directed at site) fixed to suspended angle (vertical) of size 15mm x 15mm x 0.35mm thick to hange with bottom of roof incl all necessary drilling and fixing of screws etc. The surface of ceiling shall be prepared and finished with two coats of plastic emultion paint over a coat of primer complete all as specified and directed.

M&L for hacking out old broken glass (any thickness size quality or description) from metal frame including punching or welding old glazing pins/spring clips sand providing and fixing new one of thickness 3mm complete all as specified & directed. .

S & F in repair Nylon net of bird proofing for shed/ storage accn/ soft pen and possess following properties: (a) The burst strenght upto 44 pounds. (b) Shall meet ISO 1806 Protocols. (c) 3/4" (three fourth inxh), mess netting. (d) Thickness 0.071" thick (6 strands, each 0.012" thick). (e) Quality control -filaments ; are twisted and Knotted pressure stretched and tightened. (f) Break strenght : 52 lbs/2316 Kgs per strand. (g) Chemical properties- polyethylene, a paraffin hydrocarbon, is chemically inert, flame retardant and highly resistant to most chemicals at temperatures. (h) High resistance to acids and alkaloids at all concentrations (i) High temperature -210-239 Degree, F/100-115 Degree. (j) Low temperature -139 to 166 Degree, F/-95 to 11.0 Degree C.including all fitting such as rolling pully , iron strips,rope for conrolling net ,nails etc. all as specified and directed by engineer in charge. Make-As approved by the GE after checking above parameters from manufactures test certificates.

Dismantling of stone slab and tiles pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified & directed.

KALIKAY ENTERPRISES

Vijay Construction Co

Krishna Engineering