Maintenance and repair to Technical Building, Group-D Quarter and increasing height of Compound wall at Vanku repeater Station.

Amount

Dismantling Of suport angle/Barbed wire/coping

Dismantling barbed ire or flexible wire rope in fencing including making rolls and stacking with 50mtr

By back of dismantling material like as barbed wire

Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of: T' or 'L' iron or pipe

By back of dismantling material like as barbed wire

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.complete.

By back of dismantling material like as rcc coping

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Providing and laying up to floor five level reinforced cement concrete in the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and fixing Brocken Glass picess on top of coping with cement mortar 1:4 directed & as described as per condition at site after cleaning, scrapping, and curing etc., including the cost of all materials, labours, tools & plants, scaffolding etc., complete.

20mm thick Cement Plastering to CC Block masonry with cement mortar (1 : 4 ) ( 1 cement : 4 sand ) and rackingout joints as directed, including the cost of all materials, labours, tools & plants, scaffolding curing etc., complete.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Repair of culvert area of Road

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kind of soil

Supplying and filling with sand under Road including watering, ramming, consolidating and dressing complete. by ramming and watering, lead up to 50m and in all heights including the cost of labours, tools & plants and all other charges etc complete as directed.

Supplying, filling, spreading & leveling stone boulders of size range 50mm to 20mm, in recharge pit, in the required thickness of 200mm, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Providing and laying cement concrete 1:3:6(1 cement : 3coarse sand : 6 stone aggregate ) 150mm thick to laying base coarse of Road .including mixing,batching, placing and curing etc.,and as directed at site including the cost of all materials, labours, tools & plants , cost of curing etc., complete.

Providing and laying cement concrete 1:1.5:3(1 cement : 1.5coarse sand : 3 stone aggregate ) 125mm thick to laying base coarse of Road .including mixing,batching, placing and curing etc.,and as directed at site including the cost of all materials, labours, tools & plants , cost of curing etc., complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying at per level factory make kurb stone of M-25 grade cement in position to the required line level and curvecture ,jointed with cement morter 1:3(1 cement:3fine sand )including making joints with or without grooves

Providing and laying factory made chamfered edge Cement Concrete paver blocck in tower basis ,Transimison Building front portion etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould,aid in required colour & pattern over 50mm thick compacted bed of sand,ompacting and proper embedding/laying of inter locking paver blocks into the and bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern,inishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

Synthetic enamel pant two cots and under a coat of sutable shade with ordinary paint of approved brand and manufacture

Applying two coats of Exterior Emulsion painting -Weathering Coat (Apex ultima- Asian / Long life-Berger ) or equivalent 1st quality on exterior wall surfaces at all heights with approved first quality & colour to give an even shade after applying a coat of primer wherever required and as directed & as described as per condition at site after cleaning, scrapping, and curing etc., including the cost of all materials, labours, tools & plants, scaffolding etc., complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including water thinnable priming coat with cement primer.

Applying two coats of S.E painting on doors, windows,ventilators of previously painted surfaces with Higlos luxol Berger brand/Asian of approved 1st quality and colour of synthetic enamel paint to give even shade after removing old and worn out paint at all heights by scrapping, cleaning and preparing the surface good for SE painting as directed & as described as per condition at site including the cost of all materials, labours, tools & plants , scaffolding etc. complete.

Applying priming coats with ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge

Painting two coats with 1st quality Synthetic Enamel Paint of approved brand and manufacture (Asian/ Berger/ Shalimar ) to steel & other metal surfaces to give an even shade including cleaning of all dirt, dust and other foreign matter, sand papering and supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. (Two or more coats on new work)

Patch Plastering the exposed surface of brick wall masonry upto the all level with cement mortar 1:3 (1 cement 3 fine sand) to be required thickness of 15mm thick in one layer including making the smooth surface, supply of all materials tools and plants, labour, curing etc. complete.

For sealing and faulty costruction joints (concrete/masonry work ),routed ,out/making U-shape grove size 25x25mm and then primed the area with integral crystalline slury @0.05kg/running meter

Providing and fixing hardware fittings and specials of approved quality and brand or ISI make as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality.

Replacement of 100 mm Brass hinges

Replacement of 150 mm Brass tower bolts

Replacement of 100 mm Brass tower bolts

Brass Eye Hook 150mm

100 mm mortice latch lock with 6 liver and a pair of handle

Rewedging,cramping joinery of doors&windows with new wedges in glue or white lead and repairing including Re hanging or refixing of shutters, hinges or pivotes etc completeSupply of all labour, tools & plants and mislanious materials like lead/fevical and wooden pin ,screws etc complete.(not exceeding 1Sq.m per leaf)

Providing and fixing of 35mm thick wooden doors/windows/cup-board shutters of approved Ist quality seasoned non- teak wood,including cupboard etc. as directed including fixing in frames of doors/windows/ cup-boards with brass screws including all fitting and fixtures of stainless steels of approved shape and size and as directed including cost of supply of all materials, labours, tools& plants and all other charges etc. complete.

35mm thick teak Wooden Fully glazed shutters for windows (Single/Double leaf)

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading as directed at site including cost of all materials, labours, disposal of the debris within a lead of 50mtr, tools and plants and all other charges etc. complete.

Providing and fixing water supply fittings and specials of approved quality and brand of Metro, Waterman, Plumber, Parryware make as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality.

15mm Brass Bib cock (APR-ESS-101037 Bib cock with Flange)

15mm dia CP brass stop cock

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter

Providing and fixing C.P. brass angle valve for basin mixer and geyser points ofapproved quality conforming to IS:8931 -15mm nominal bore

15mm Angle valve (MQT-526-ESS- Basin inlet connection- Concealed with wall flange)

Cleaning the septic tank/Inspection chember, sewer line,including taking out all sludge and liquids, washing with fresh water and diposing the same as per IS specification norms burried in the ground and as directed. Supply of all labour, tools &plants etc complete.

Septic tank small size

Inspection chember

Replacement of unserviceable/damaged low level cistern 10litre capacity of approved quality and making connections of inlet, outlet with EWC/IWC including disposing the unserviceable materials from the site. Supply of all materials, labour,tools, etc. complete.

Supplying & laying 100/150 mm dia PVC/sand cast iron. Sewer/rain water pipe( Finolex)line of approved quality including required excavation, laying and joining the pipes in proper gradient,bed concrete etc with all nessassary fittings as directed and cost of supply of all materials, labours, tools & plants and all other charges etc. complete.

110mm Dia PVC Pipe for Sewage line

110mm Dia sand cast iron pipe for Rain water

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms.

Supplying & fixing CI Manhole cover of approved size & make with all nessassary fittings of approved quality fixed as directed, Supply of all materials, labours, tools & plants and all other charges etc. complete.

300mmx300mm cover with frame

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Maruti Abhiyantriki

KK ENGINEERS

shah associates