Loading…
Loading…
Tender Value
₹12.5 L
EMD Value
₹25,000
Closing Date
13 Oct 2026, 11:00 am5d left
EE
Division Shahpur
Providing and laying CC Pavement at RD 1/700 to 2/00
2026_PWD_145078_10
NIT 6200-6259 DT 01-10-2026
Open Tender
Civil Works
Percentage
60 days
Shahpur
Please refer tender document
13 documents required · 13 mandatory
₹500
₹25,000
6 Oct 2026
6 Oct 2026
13 Oct 2026
6 Oct 2026
13 Oct 2026
6 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing, laying, spreading and compacting Water Bound Macadam Grading-III of 75 mm compacted thickness by mechanically means comprising of stone aggregate size 53 mm to 22.4 mm specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80–100 kN static roller to proper grade and camber including applying and brooming stone screening Type-B of size 11.2 mm nominal size at the rate of 0.18 per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD technical specification Section 400 and as per the direction and entire satisfaction of Engineer-in-Charge complete, including carriage of materials with in all leads, lifts and other incidentals..The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding GST | 67.5 | per cubic metre | 2,100 | ₹1,41,750 |
| 2 | Providing and laying design mix cement concrete of M-30 grade in roads/taxi tracks/runways, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved and specified design criteria, providing dowel bars with sleeve/tie bars wherever required, laying at site, spreading and compacting mechanically using needle and surface vibrators, levelling to required slope/camber, finishing with required texture, including steel formwork with sturdy M.S. channel sections, curing, and making provision for contraction/expansion, construction and longitudinal joints (10 mm wide × 50 mm deep) by groove-cutting machine, providing and filling joints with approved joint filler and sealants, complete in all respects as per the directions of the Engineer-in-Charge. including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government excluding GST. | 135 | per cubic metre | 8,200 | ₹11,07,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.04 MB
SBD10.pdf
Tender Documents • 3.98 MB
BOQ_216082.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .