Engaging agency for Conducting Third party Inspection to Ensure quality, Control & Assurance on behalf of KNNL For work of -Filling up of Additional 14 Nos and Augumentation to 3 Nos of MI/ZP tanks under Dc-4 of Savanur Lift irrigation Scheme including Operation and Maintenance for period of 5 years on turn-Key basis

Conducting Test on Soils- Sieve Analysis.

Conducting Test on Soils -Liquid and Plastic Limits.

Conducting Test on Soils -Standard Compaction (OMC &MDD).

Conducting Test on Soils- Soaked CBR .

Conducting Test on Soils -Free Swell Index.

Conducting Test on Soils- Traxial shear at OMC.

Conducting Test on Soils -Swelling Pressure.

Conducting Test on Soils -Specific Gravity.

Conducting Test on Soils- In-situ Moisture Content & In-situ Dry Density, Dry Density test (FDD).

Conducting Test For Cement- Consistency test.

Conducting Test For Cement-Soundness Test.

Conducting Test For Cement-Initial and Final Setting time.

Conducting Test For Cement- Fineness test.

Conducting Test For Cement Compressive strength test(set of Three Nos).

Conducting Test on Fine Aggregate-Sieve Analysis.

Conducting Test on Fine Aggregate-Specific Gravity, Bulk Density, Bulking and Moisture Content & Water Absorption.

Conducting Test on Fine Aggregate-Fineness Modulus.

Conducting Test on Fine Aggregate-Silt Content.

Conducting Laboratory Test on Coarse Aggregate- Sieve Analysis.

Conducting Laboratory Test on Coarse Aggregate-Specific gravity, Bulk density.

Conducting Laboratory Test on Coarse Aggregate-Aggregate Impact Value.

Conducting Laboratory Test on Coarse Aggregate- Abrasion Value.

Conducting Laboratory Test on Coarse Aggregate- Crushing Value.

Conducting Test on Water -pH Value (water).

Conducting Test on Steel -Conducting lab test on steel (roundbar/twisted ) for determining tensile strength,elongation, 0.2%proof stress and unit weight of Dia 8mm,10mm,12mm,16mm and 20mm.

Conducting Test for Mix Designs- 40M10.

Conducting Test for Mix Designs -20M25.

Conducting Test for Mix Designs -20M30.

Conducting Compression Test on Cement mortor /Cement Concrete cubes- Compressive Test (per set of 3 Cubes).

Conducting Test on Granular Sub Base- GSB Mix Design.

Conducting Test on Granular Sub Base- Sieve Analysis.

Conducting Test on Granular Sub Base-Sutability test Water Absorption, 10% Fines Value, Liquid & Plastic Limit, Impact Value, Compression Value, Modified Compaction .

Conducting Test on Granular Sub Base- field Density test (Core Cutter).

Conducting Test for Wet Mix Macadam- WMM Mix Design.

Conducting Test for Wet Mix Macadam- Sieve Analysis.

Conducting Test for Wet Mix Macadam Sutability test Water Absorption, Liquid and Plastic Limit, Impact Value, Flekiness & Elongation Index Compression Value, Modified Compaction..

Conducting Test for Wet Mix Macadam- Field Compaction Test for WMM (core cutter).

Conducting Test for Dense Bituminous Macadam- DBM Mix Design.

Conducting Test for Dense Bituminous Macadam- Seive Analysis.

Conducting Test for Dense Bituminous Macadam- Impact Value.

Conducting Test for Dense Bituminous Macadam- Abrasion Value.

Conducting Test for Dense Bituminous Macadam- Flekiness & Elongation Index, Water Absorption, Density..

Conducting Test for Dense Bituminous Macadam- Specific Gravity.

Conducting Test for Dense Bituminous Macadam-Flash and Fire Point.

Conducting Test for Dense Bituminous Macadam-softening point.

Conducting Test for Dense Bituminous Macadam-Penetration.

Conducting Test for Dense Bituminous Macadam-Ductility.

Conducting Test for Bituminous Concrete -BC Design Mix.

Conducting Test for Bituminous Concrete -Seive Analysis.

Conducting Test for Bituminous Concrete- Impact Value.

Conducting Test for Bituminous Concrete -Abrasion Value.

Conducting Test for Bituminous Concrete - Flekiness & Elongation Index, Water Absorption, Density..

Conducting Test for Bituminous Concrete -Specific Gravity.

Conducting Test for Bituminous Concrete -Flash and fire Point.

Conducting Test for Bituminous Concrete -softening point.

Conducting Test for Bituminous Concrete -Penetration.

Conducting Test for Bituminous Concrete -Ductility Test.

Conducting Test for Bricks- Water Absorption.

Conducting Test for Bricks -Compressive strength.

Conducting Test for Bricks- Efflorescence (per Set of five).

Conducting Test for Bricks -Dimensional Analysis.

Conducting Test for Non-Destructive Test -Rebound Hammer .

Conducting Test for Non-Destructive Test -Conducting ultrasonic Testing on welded joints at site including all charges..

Conducting test for Hydraulic Test- Hydrostatic Pressure test for MS Pipes (witness).

Conducting test for Hydraulic Test-Hydrostatic Pressure test for HDPE Pipes (witness).

Conducting test for Hydraulic Test-Epoxy Coating Thickness Test MS Pipe.

Inspection- Rate for Factory Inspection for testing of electrical / mechanical equipments as per approved QAP.(Electro Mechanical Expert) inclusive of TA, DA & Incidental charges etc. Within the State.

Inspection-Rate for Factory Inspection for testing of electrical / mechanical equipments as per approved QAP.(Electro Mechanical Expert) inclusive of TA, DA & Incidental charges etc. Out side the state.

Conducting Tests on Electro Mechanical EquipmentsTesting Commissioning of Power Transformers Testing Ratio Test SC TestExcitation Current Test Highpot Test Magnetic Balance Test Vector Group Test, Induced High voltage test OLTC Operation Local and Remote Protective Devices operation checks,Stability checks For Differential REFRProtectionWinding Resistance Test Insulation Resistance Test, TanDelta andCapacitance Test,Transformer mounted protective Devices Sweep Frequency Response Anlysis.

Transformer OIL test (Main Tank/Top/Bottom/OLTC)- a. Break down voltage(BDV), b. Dielectric Dissipation Factor(Tan Delta), c. Neutralization number(Acidity), d.Flash Point, e.Gas Analysis, f.Kinematic Viscocity

Condition Monitoring test on Motors- Online Test Electrical Signature Analysis, Vibration Analysis, Acoustic Emission Analysis

Condition Monitoring test on Motors- offline test a. Insulation Resistance (IR) Test, b. Dielectric Discharge (DD)Test, c.Capacitance & Tan Delta Test, d.DC Winding Resistance Test, e. Partial Discharge Test (offline). f.Surge Comaparison test, g.Winding Circuite Analysis (MCSA)

Testing AND Commissioning Wiring Identification of wires, ferruling, crimping AND termination of wires for annunciation, etc, Testing of relays, CTs, PTs & Breaker for operation. For additional 11 kV panel (indoor type)

Condition Monitoring Test on Building LA -Earth Resistance, Continuity Testing, Physical Inspection

Condition Monitoring Test on Earth Pit-Earth Resistance

Condition Monitoring Test on Earth Rubber Mat.Thickness, AC Proof Voltage, AC Dielectric Strength,Leakage Current, Breakdown voltage, Insulation Resistance.

Condition Monitoring Test on Busbar Insulation Resistance (IR)

Condition Monitoring Test on EOT Crane Insulation Resistance (IR),Functional checks for control panel.

Relay Testing (33KV and 11KV) Fuse failuer relay,DC failuer relay, Check synchronizing relay, Transformer differential relay,Buchholz Relay,over current Relay & Earth fault relay ,Motor Protection, Feedar Protection, Thermal over load relay..

Condition Monitoring Test on Capacitors,Insulation Resistance (IR),Functional checks Operational Checks..

Condition Monitoring Test on Soft Starter,All relay secondary injection & Timing checK, All meters calibration tests.

Condition Monitoring Test on LT MCCB/ACB Insulation Resistance (IR),All relay secondary injection & Timing check, All meters calibration tests,Functional checks for contol panel..