WELCOME MAINT OF CERTAIN OMQs INCLUDING ELECTRIC WORKS AND OTHER MISC REPAIRS AT AF STN BHUJ

Amount

Material & labour for preparation of old treated surfaces of wall including brooming down, scrapping down smoke soots etc. and appying one coat of white wash, complete all as specified and directed by Engineer-in-Charge

Material & labour for preparation of old treated surfaces of ceiling including brooming down, scrapping down smoke soots etc. and appying one coat of white wash, complete all as specified and directed by Engineer-in-Charge

Material & labour for preparation of old treated surfaces on ceiling surfaces and applying one coat of distemper oil emulsion complete all as specified and directed by Engineer-in-Charge

Material & labour for preparation of old treated surfaces on wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed by Engineer-in-Charge

Complete removal of existing treatment on old treated surfaces applying two coats of distemper oil emulsion complete all as specified and directed by Engineer-in-Charge

Material & labour for applying 1-2mm thick wall care putty on wall surfaces complete all as specified and directed by Engineer-in-Charge

Material & labour for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying Two coat of weather proof acrylic emultion paint over one coat of primer all as per manufacturers instructions and directed including scaffolding complete all as specified and directed by Engineer-in-Charge

Material & labour for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying two coats of damp proof paint complete all as specified and directed by Engineer-in-Charge

Material & labour for preparation of old wooden painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge

Material & labour for preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description n exc 1 sqm complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC door PDS-01 comprising of shutter and frame of Make : Rajshree/Accura Polytech Pvt Ltd (Accucel) all as shown on drg No.CEAA/TD/149 sheet No. 1/1 (PVC RIGID FOAM) , door frame/ chowkats of solid rigid foam profile FP-6030 and shutter of solid PVC foam profile FP 7114 with 4 mm thick high pressure compact laminate as infill (Panel) including necessary hardeware fittings complete all as specified and directed by Engineer-in-Charge..

Supply & fix 35mm thick 2nd class hard wood factory made plain framed, paneled shutters (any number of panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veveered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge

Supply & fix 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/ Gauge etc. Size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) complete all as specified and directed by Engineer-in-Charge.

Supply & fix for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih SS wire staples complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparing new or previously untreated surfaces wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on wooden surface complete all as specified and directed by Engineer-in-Charge.

Supply & fix for 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy complete all as specified and directed by Engineer-in-Charge..

Supply & fix for 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge..

Supply & fix for aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size complete all as specified and directed by Engineer-in-Charge..

Supply & fix 100mm size of hinges butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed by Engineer-in-Charge..

Supply & fix 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge..

Supply & fix for mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge..

Supply & fix magnetic catches Model No.2 for cupboard doors etc complete all as specified and directed by Engineer-in-Charge..

Supply & fix stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame including taking down old hinges complete all as specified and directed by Engineer-in-Charge.

Supply & fix MS hold fast 80mm long for fixing Cupboard on wall with all fixtures etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for external teak wood lipping, 6mm thick for glass fixing or bidding fixed with nail or as per requirement for 18mm to 20mm thick plywood or aluminium etc complete all as specified and directed by Engineer-in-Charge..

Supply & fix aluminium, anodised 100mm size of hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge

Supply & fix 5mm to 5.5 mm thick sheet glass ordinary quality area n exc 0.50 Sqm in each pane and glazing for fixing in Plywood any type in any shape and size circular cutting incl waste ,wood ,plywood and aluminum frame work complete all as specified and directed by Engineer-in-Charge.

Supply & fix 5mm to 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for fixing in Plywood any type in any shape and size,circular cutting incl waste ,wood and aluminum frame work complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs brass mortice lock, vertical type, size 100 mm , 4 levers with 2 keys complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs double action floor spring hydrauilically regulated made up of minimum 1.25 mm thick aluminium alloy sheeet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed. complete all as specified and directed by Engineer-in-Charge..

Supply & fix floor door stopper 150mm long , of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge..

Material & loabour for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling,Aluminium composite panel,C.P. brass/ stainless steel screws complete all as specified and directed by Engineer-in-Charge..

Supply & fix 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lapping/fixed in Aluminium section for windows doors etc in square not exc 0.58 Sqm each in each pane complete all as specified and directed by Engineer-in-Charge..

Supply & fix 3 mm thick figure glass/ tinted glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.58 Sqm each in each pane, lovers etc complete all as specified and directed by Engineer-in-Charge..

Supply & fix 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work complete all as specified and directed by Engineer-in-Charge..

Material & lobour for aluminium window/ventilators with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised alumium fittings such as stay, hinges glazing with 4.0 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm apperture as per drg No. 64 sheet No 1/3,2/3 and 3/3 dated 31-5-93all as specified and directed.(Tint of glass shall be approved by GE) complete all as specified and directed by Engineer-in-Charge Note :- Aluminium grill fixed under above item shall be measured and paid seperatly ( Whatever shown on drg the thickness of frame shall be 2.5mm and thickness of shutter shall be 1.6mm the thickness of glass shall be 4.00mm.)

Supply & fix in repairs bathroom cabinet PVC frame box type with mirror in front of size 350x450mm with 6 m thick glass fixed to wall with screws complete all as specified and directed by Engineer-in-Charge

Material & lobour for aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 4.4 mm x 7mm complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land complete all as specified and directed by Engineer-in-Charge.

Material & lobour for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etc complete all as specified and directed by Engineer-in-Charge.

Material & lobour for glazed digital ceramic coloured tiles Ist quality in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and icluding plaster in CM 1:4 complete all as specified and directed by Engineer-in-Charge

Material & lobour for non skid ceramic coloured tiles 7 to 8mm thick (sqaure/rectangular) area of each tiles exc. 0.06Sqm but n.exc. 0.11Sqm as per IS - 13755 in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge

Material & lobour for vitrified ceramic dark shade 10 mm thick (sqaure/rectangular) area of each tiles n.exc. 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing tiles and including 15 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge

Material & lobour for vitrified ceramic tiles in vertical surfaces of size 600 x 200 x 10 mm thick set and jointed in neat cement slurry and pointed in colour cement to match existing tiles and inluding rendering 10 mm thick in cement mortar 1:4 on concrete surfaces as backing coat complete all as specified and directed by Engineer-in-Charge

Material & lobour for in repairs for 18-20mm thick granite, Z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded complete all as specified and directed by Engineer-in-Charge.

Material & lobour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Taking up on down steel tubing and connection incl cleaning for refixing complete all as specified and directed by Engineer-in-Charge of the following bore of pipe

15mm bore

20mm bore

25/32mm bore

40/50mm bore

Supply & fix CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge of the following sizes: (SDR-13.5)

20mm bore

25mm bore

32mm bore

40mm bore

Supply & fix in repair grating doom 125mm dia with waste hole of PTMT (minimum weight 40 grams) complete all as specified and directed by Engineer-in-Charge

Supply & fix in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engineer-in-Charge.

Dismantling of cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer-in-Charge following bore of pipe

100/110mm dia of pipes

75mm dia of pipe

Supply & fix of UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors complete all as specified and directed by Engineer-in-Charge of the following size :-

110mm dia of pipe

75mm dia of pipe

Supply & fix of UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735 type 'B' jointed with solvent cement complete all as specified and directed by Engineer-in-Charge of the following sizes :-

110mm dia of pipe

75mm dia of pipe

Supply & fix PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge of the following sizes : -

75mm bore

110mm bore

Supply & fix PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge of the following sizes :-

75mm bore

110mm bore

Supply & fix in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement with 75mm outlet dia complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs Jaquar jet spray chrome with 8mm dia, 1meter long flexible tube & wall hook health faucet wall mounted installation type . Model No- ALD-CHR-573 JAQUAR or equivalent model of make as per Annexure-I of Particular Specifications complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia of piep. Make : Jaquar, Cat No QQT-7037 or equivalent model of make as per Annexure-I of Particular Specifications complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs angular stop cock with adjustable wall flange, cast coper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe. Make : Jaquar, Cat No - QQT-7053 or equivalent model of make as per Annexure-I of Particular Specifications complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs chromium plated mixing valve, wall mixer 3 in 1 system with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe including three joints to steel pipe or unions. Make : Jaquar, Cat No QQT-7281 or equivalent model of make as per Annexure-I of Particular Specifications complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs chromium plated mixing valve (central hole basin mixer) with small spout without popup waste system with 450mm long braided hoses including three joints to steel pipe or unions. Make : Jaquar, Cat No - QQT-7167B or equivalent model of make as per Annexure-I of Particular Specifications complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs chromium plated shower rose overhead single flow 100mm dia (ABS chrome plated) without Arm including fixed to steel pipes or union and complete all as specified. Make: Jaquar, Cat No - OHS-1989 or equivalent model of make as per Annexure-I of Particular Specifications complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs chromium plated telephone shower with 1.5m long flexible tube & swill wall hook including fixed to steel pipes or union and complete all as specified. Make : Jaquar, Cat No - HSH-5537H or equivalent model of make as per Annexure-I of Particular Specifications complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs chromium plated metropole flush valve dual flow concealed type woth control cock operation plate 40 mm size including fixed to steel pipes or union and complete all as specified. Make : Jaquar, Cat No - FLV-1089Q or equivalent model of make as per Annexure-I of Particular Specifications complete all as specified and directed by Engineer-in-Charge. (Note : Including all making good with refixing tiles portion)

Supply & fix in repairs of vitreous china wash basin including pedastal, white, flat back, size 630mm x 450mm including chromium plated waste coupling, plug and chain, necessary brackets. Make : CERA, Cat No 1008 & 1108 or equivalent model of make as per Annexure-I of Particular Specifications complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs chromium plated soap dish holder. Make Jaquar, Cat No AQN-7731 or equivalent model of make as per Annexure-I of Particular Specifications complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs chromium plated toilet paper holder. Make Jaquar, Cat No AQN-7751 or equivalent model of make as per Annexure-I of Particular Specifications complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repaires chromium plated towel rail 24" long between flanges. Make Jaquar, Cat No AQN-7711 or equivalent model of make as per Annexure-I of Particular Specifications complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern)(wall hung type) white (excluding, flushing cistern and flush pipe) complete connected to drain make : CERA, Cat No - 2033 & 2315 or equivalent model of make as per Annexure-I of Particular Specifications complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all sizae 915 x 460 mm, bowl size 410 x 330 x 180 mm mm Make : Nirali (Model : elegance small from regular range, glossy) or size 915 mm x 460 mm bowl size 410 x 330 x 178 mm complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair stainless steel plate rack made out of 1mm thick stainless steel sheet, overall minimum size 60cm x 90cm and for 6 plates as approved by GE complete all as specified and directed by Engineer-in-Charge

SMaterial & labour for precast cement concrete block masonary with solid blocks exc 10cm in width Type C1 (1:3:6) 20mm graded and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces complete all as specified and directed by Engineer-in-Charge

Material & labour for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

Material & labour for rendering on concrete surfaces 15mm thick in two layers first coat 10mm thick in CM 1:6 and second coat 5mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and fair complete all as specified and directed by Engineer-in-Charge. Note: WPC shall be measured and paid separately under respective item.

Supply only water proofing compound (ISI Marked) complete all as specified and directed by Engineer-in-Charge

Material & labour for preparation of new or previously untreated concrete extrernal surfaces Finishing walls with Acrylic Smooth exterior paint of required shade applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by Engineer-in-Charge

Material & labour for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs 20/22mm dia fancy type SS 304 grade curtain rods with wall thickness not less than 1.25mm, fixed to walls with and including a pair of fancy type SS brackets and SS clamps best quality as approved by GE complete all as specified and as directed. (Note - Length of curtain rod shall be measured and paid for as one unit. Quoted rate is deemed to include for provision of a pair of brackets and clamps per unit length) complete all as specified and directed by Engineer-in-Charge

Supply & fix 1000 Ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position upto 12m height of slab all as specified in SSR Part I including dismantling of old water tank complete all as specified and directed by Engineer-in-Charge

Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity exc. 250 liters and n.exc. 500 ltrs including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks including mentioning date of cleaning with synthetic enamel paint on water tank complete all as specified and directed by Engineer-in-Charge

Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity exc. exc 500 liters and n.exc. 1000 liters including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks including mentioning date of cleaning with synthetic enamel paint on water tank complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs PVC shelf fixed to walls with screws including necessary drilling holes. complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs PVC corners fixed in bath rooms with screws including necessary drilling holes. complete all as specified and directed by Engineer-in-Charge

Taking down carefully old metro flush internal parts and servicing the parts including replacing the parts which are not functioning / serviceable and re-fixing the all internal parts of metro flush in position in existing opening complete all as specified and directed by Engineer-in-Charge. Note: (i) Supply only new parts of metro flush shall be measured and paid separately against the relevant items here-in-after (ii) The parts of metro flush shall be of the same make as per existing or equavalent as approved by GE.

Supply only push control cock any shape and size.

Supply only Sleeve

Supply only Wall flange

Supply only Lock

Supply only Spring Cap / Key

Supply only Spring

Supply only Seal Washer

Supply Body Nut

Supply only O-Ring Small Size

Supply only O-Ring Large Size

Supply only stopper Bush

Supply only sealed piston and spindle

Material & labour in repairs plastic water closet seat cover, any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge

Dismantling boarding, any description like kitchen cabinet any material Plywood / celuka ply etc fixed in any position with screws complete all as specified and directed by Engineer-in-Charge

Supply & fix 18mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge

All as per item 96.00 above but 18mm thick plain PVC celuka ply complete all as specified and directed by Engineer-in-Charge

All as per item 96.00 above but 12mm thick plain PVC celuka ply complete all as specified and directed by Engineer-in-Charge

All as per item 96.00 above but 05mm thick plain PVC celuka ply complete all as specified and directed by Engineer-in-Charge

Supply & fix PVC coated basket for kitchen drawers of required size and including sliding channels complete all as specified and directed by Engineer-in-Charge

Supply & fix in repairs mild steel polished kitchen cabinet drawer sliding channel of size 16 inch manually type closing box complete all as specified and directed by Engineer-in-Charge.

Supply & fix 75mm size butt hinges,cast brass with mild steel hinge pin bright polished complete all as specified and directed by Engineer-in-Charge.

Supply & fix extruded brass handles, fabricated type polished of length 100 mm complete all as specified and directed by Engineer-in-Charge.

Material & labour for in repairs stainless steel 'L' shape soft closing spring hinges for cabinets shutters ISI Marked complete all as specified and directed by Engineer-in-Charge.

Material & labour forin repairs GI push and pull channel brand of size 20"(51 CM) length for modular cabibets complete all as specified and directed by Engineer-in-Charge.

Supply & fix fatory made PVC Internal door frame manufractured by of the size 120mmx50mm(double door Frame) with a wall thickness of 5mm PVC Celuka Sheet of density 600Kg/Cbm manufractured by an ISO-9000 certified company, made out of extruded 5mm PVC Celuka sheet, mitre cut at two corners and joined with two Nos, of 150mm long brackets of 15mmx15mm M.S Square tube. The two vertical door profiles are to be reinforced with 20mm x20mm M.S tube of 19 guage throughout the frame. The door frame shall be fixed to the wall using 65/100mm long M.S screws through the frame by using PVC Fasteners. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc complete as per manufractures specification and complete all as specified and directed by Engineer-in-Charge.

Supply & fix 30mm thick factory made internal PVC one side Prelem door shutter wood Free consisting of frame made out of M.S tubes of 19 guage thickness and size of 20mm x 20 mm for stiles as well as top bottom & lock rail. The inside panel shall consist of 20mm thick multi chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement adhesive with 5mm (+0.5) thick prelam PVC sheet of the inside panel. All the four edge of the panel to be sealed with lipping of 10mm thick & 20 mm wide PVC sheet baton(made by sticking 2Nos. rigid foam PVC sheets of 5mm (+0.5) thickness using PVC solvent cement adhesive. 20mm thick (5mm x 4 Nos) Thick PVC sheet to be given for lock provision at lock provision at lock height. including all fittings complete as per direction of Engr-in-charge, manufractures specification and drawing complete all as specified and directed by Engineer-in-Charge.

Supply & fix 30mm thick factory made wire mesh solid PVC door shutter consisting of frame made out of M.S tubes of 19 guage thickness and size of 20mm x 20 mm for stiles and 15mm x 15mm for top, lock & bottom rails. 20mm x 20mm M.S square tubes shall be covered with 5mm thick heat moulded Rajshri PVC 'C' channel of size 30mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be PVC beading on either side forming stiles & 5mm thick 115mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be PVC beading on the inner side to from top and bottom rail and 130mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be PVC beading on from lock rail 10mm (5mm x2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panel will be Alumunium wire mesh fitted in by 'C' channel of size 35mm x 10mm on the eitherside in stiles. The inner side 'C' channel is fixed by 20mm x 20mm M.S. tube on both sides with screws. The wire mesh in top, bottom & lock rail is sealed with total 8 Pars of 15mm x 15mm & 20mm x 20mmtube with Aluminium wire 10mm (5mm x 2) thick PVC strip of 25mm width is to be stuck & nails on both side of Aluminium wire mesh interior at the top, bottom & lock rail. including all fittings complete as per direction of Engr-in-charge, manufractures specification and drawing complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete in any position and in any description not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge

Material & labour for separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and directed by Engineer-in-Charge

Material & labour for reinforced cement concrete in (using 20mm graded stone aggregate) for chajjas or simillar wks complete all as specified and directed by Engineer-in-Charge

Material & labour for reinforced cement concrete (using 20mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge

Material & labour for formwork with fair finished surface to side of soffits of floors, or roof beam, beam haunchings, girders, bressummers,lintels, cantilevers, shelves incl sup-posts, overhang etc, also splays bet floor and beams etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for reinforced cement concrete (using 20mm graded stone aggregate) for Columns, pillars, piers,posts and struts complete all as specified and directed by Engineer-in-Charge.

Material & labour for formwork to sides of pillars, posts, columns, piers and stanchions in square, rectangular fair finished surface of concrete complete all as specified and directed by Engineer-in-Charge.

Material & labour for mild steel TMT bars 8 mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (reinforced) of roofs, floors, chajjas, and similar suspended work in any position complete all as specified and directed by Engineer-in-Charge.. Note : upto 12m height of double scaffolding and formwork to be included in the quoted rates.

Material & labour for preparation of surface and removal of rust in the loosely bonded concrete of the RCC deckslab, beam/girder shall be chipped out using the bars and applying rest remover using small brush and allow the react it for 16-40 hrs. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth complete all as per manufacturer instructions and complete all as specified and directed by Engineer-in-Charge. Quoted rates to include scaffolding costs

Material & labour for applying two coats of anti-Corrosive primer two component (epoxy anticorrosive zinc rich coating ) on reinforcement steel surfaces uniformely. Coating shall be applied by the brush of the exposed and cleaned rebars with in interval of 45 minutes to 1 hour @40 microns DFT/coat and allowed to completely dry for 24 hours complete all as per manufacturer instructions and complete all as specified and directed by Engineer-in-Charge.. Quoted rates to include scaffolding and formwork costs

Material & labour for preparation of concrete surfaces by removing loose concrete dust, dirt etc. Cleaning the surface properly and applying one liberal coat of epoxy bounding agent (two component agent) by brush application to parent concrete complete all as per manufacturer instruction and complete all as specified and directed by Engineer-in-Charge.Quoted rates are inclusive of scaffolding and formwork costs .

Material & labour for 50mm thick (average thickness) polymer modified single component alkaline resistent fibre reinforced, thixotropic, cementitious patch repair morter on conrete structure. Applying the morter around the reinforcement and finishing to bring it in line with existing contrete surface complete all as manufacturer instructions and complete all as specified and directed by Engineer-in-Charge.. Cured mortar should exhibit compressive strength of 20 MPa after 1 day and atleast 45 MPa after 28 days, tensile strength atleast 2.5 MPa after 28 days and flexural strength atleast 7 MPa after 28 days. Quoted rates to include scaffolding (steel double) upto 15m height and formwork costs

Material & labour for micro concrete to existing concrete structure including proper tight leak proof shuttering SPL polimer modified cementitious , low pemeable " free flow' non shrink self compacting micro concrete shall be grade M50 as per recommended w/c ratio and pouring as per the required thickness complete as per manufcturer include scaffolding , formwork upto height 15m for additional reinforcement drilling holes etc any number as per direction of Engr in Charge included in this items etc complete all as specified and directed by Engineer-in-Charge .

Material & labour for providing and executing injection/pressure grouting in cracks in the parent concrete by fixing PVC/Aluminium nipples at 150 mm to 200 mm distance or specified distances as per design and detailed specifications. Pressure grouting using low viscous epoxy grout Conbextra EP 10(M)- Moisture insensitive epoxy resin injection material supplied in 1.5 Litre pack which can grout gaps ranging from 0.25mm to 9mm, having mix density 1060 kg/m3,Compressive Strength(ASTM D695)-60/mm2, Tensile Strength(ASTM C 304-97)-20 N/mm2, Flexural strength(BS 6319 Part 4)-45 N/mm2. Pressure grouting shall be carry out after surface preparations includes fixing nipples and filling crakcs with epoxy mortar one day before grouting, injecting low viscous grout mechanically about pressure 3.5 - 7.0 kg/cm² , removing nipple after grouting and sealing with epoxy mortar etc complete as directed by EIC. Payment shall be made on actual grout consumed.Including necessary steel double scaffolding (upto 15 Meters Height from ground level) complete all as specified and directed by Engineer-in-Charge. Note(i) : Drilling and all other arrangements for nippal fixing shall be deemed to be included in the quoted rate. Note (ii) : Rates quoted for all items should include working upto 12m height including all necessary scaffolding , staging etc .

Demolition of unreinforced concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) removing debris outside MOD land complete all as specified and directed by Engineer-in-Charge..

Material & labour for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection finishing even and smouth wiyhout using extra cement complete all as specified and directed by Engineer-in-Charge.

Material & labour for 75mm thick PCC 1:4:8 type D-2(using 40 mm graded aggregate) as in sub base surface complete complete all as specified and directed by Engineer-in-Charge..

Supply & fix in repairs 10 Ltr capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float and handle, fixed in position and connecting including taking down old cistern complete all as specified and directed by Engineer-in-Charge.

Dismantling asbestos cement (corrugated, Semi corrugated ,etc ) , galvalume any type sheets in roof coverings complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed by Engineer-in-Charge .

Supply & fix framed work such as grills, gratings, railing and grill of balcony etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Grill on drain etc similar work con- forming to Fe.290.Gde-E-165 [ for balcony and staircase repair special care with safety precaution need to be taken as per GOI norms height shall be 15m for balcony railing repairs ] complete all as specified and directed by Engineer-in-Charge .

Supply & fix structural steel works as in tubular roof trusses, purlins, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe, channel or flat sections) including distance pieces, cleats , MS plate, riveting incl bending and welding, conforming to Fe – 410W Gde E -- 250 quality A complete all as specified and directed by Engineer-in-Charge..

Supply & fix Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge .

Supply & fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge .

Supply & fix mild steel works as in wind ties for roof including securing bolts, all necessary drilling etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge..

Material & labour for talking down carefully copper/aluminium point wiring (light, fan,socket or power) complete including teak wood battens or from existing conduits with all fittings, such as switches, ceilling rose, pendants, sockets, lamp holder, fan regulators, brackets light fittings (except tube light fitting & ceiling fan) and removal of old material form site (except fitting to be reused) and making good disturbed surfaces of walls, floors ceilling etc complete all as specified and directed by Engineer-in-Charge to match with existing surfaces.

Material & labour for taking down sub main wiring any size of two single core aluminium/copper conductor cable PVC insulated alongwith/ without conduit and accessories and removing from site of work making good the disturbed surfaces of wall and floor / ceiling etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING/PVC CONDUIT INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed as earth wire continuity with metal/PVC surface/concealed box ccomplete all as specified and directed by Engineer-in-Charge for following :-

One light point controlled by one, one way switch single pole

One Fan point controlled by one, one way switch single pole

One 3 pin 5 Amp socket outlet on the same board .

One bell point controlled by one bell push on independent board.

One 3 pin 5 Amps socket out let on independent board

All as per item No.138.00 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through existing conduit including provn of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with new plastic laminated white coloured top sheet cover 3.0 mm thick on existing sunken box complete as specified and directed.

One light point controlled by one, one way switch single pole piano type

One Fan point controlled by one, one way switch single pole piano type

One 3 pin 5 Amp socket outlet on the same board .

One 3 pin 5 Amps socket out let on independent board

One light point controlled by two, two way switch single pole piano type

All as per item No 140.00 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

Supply & fix in replacement modular white cover plate with frame of module 1/2 flush ISI marked complete all as specified and as directed by the Engr-in-Charge.

Supply & fix in replacement modular white cover plate with frame of module 3 flush ISI marked complete all as specified and as directed by the Engr-in-Charge.

Supply & fix in replacement modular white cover plate with frame of module 6 flush ISI marked complete all as specified and as directed by the Engr-in-Charge.

Supply & fix in replacement modular white cover plate with frame of module 8 flush ISI marked complete all as specified and as directed by the Engr-in-Charge.

Supply & fix in replacement modular white cover plate with frame of module 12 flush ISI marked complete all as specified and as directed by the Engr-in-Charge.

Supply & fix in replacement modular blank plate module 1 complete all as specified and as directed by the Engr-in-Charge

Supply & fix in replacement modular switch flush type SP one way, 6 Amp, 1 module ISI Mark complete all as specified and as directed by the Engr-in-Charge

Supply & fix in replacement modular switch one way , 16 Amp. flush type,1 module ISI Mark complete all as specified and as directed by the Engr-in-Charge.

Supply & fix in replacement modular socket outlet 3 pin,6 Amp, flush type 2 module, ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply & fix in replacement modular socket outlet 3 pin,6/16 Amp, flush type 2 module, ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply & fix in replacement modular bell push flush type 6 Amp,1 module, ISI marked complete all as specified and as directed by the Engr-in-Charge

Supply & fix in replacement bell, AC, 230 V, SP, ding dong type complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of ceiling fan regulator 120 Watt 2 module Modular type electronic step type 5 step 360 deg complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacment of 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-Charge for following :-

MCB TPN 40 To 100 Amp

MCB SP 5 To 32 Amp

MCB SPN 32 Amp

Supply & fix in replacement of double door sheet metal enclosures factory made DBs protection class IP-42, suitable for fixing of MCBs conforming to IS-13032, Isolators etc triple pole and neutral 4 way with 200 Amp rated bus bar 415V powder coated painted complete all as specified and as directed by the Engr-in-Charge

Supply & fix in replacement of double door sheet metal enclosures factory made DBs protection class IP-42, suitable for fixing of MCBs conforming to IS-13032, Isolators etc single pole and newtral 8 way with 200 Amp rated bus bar 240v powder coated painted complete all as specified and as directed by the Engr-in-Charge

Supply & fix in replacement of ceiling rose surface bakelite 65mm x 50mm three terminal complete all as specified and as directed by the Engr-in-Charge.

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 2.5 Sqmm single core, copper conductor drawn through steel conduit and 2.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed (Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit) complete all as specified and as directed by the Engr-in-Charge

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4.0 Sqmm single core, copper conductor drawn through steel conduit and 4.0 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed (Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit) complete all as specified and as directed by the Engr-in-Charge

All as per item No 151.00 here-in-before but with 4.0 Sqmm copper conductor in PVC casing caping complete all as specified and as directed by the Engr-in-Charge

Supply & fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply and fix inreplacement wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 20 W 4 ft indoor decorative (white) with 2 Core copper wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fix inreplacement wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative (white) with 2 Core copper wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 25 W light including material and labour for suitable bracket made of 20/25 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers complete all as specified and directed by Engineer-in-Charge.

Taking down carefully ceiling fan / exhaust fan by disconnecting electric connection for carrying out repairing such as rewinding, replacement of defective spare part, over hauling and painting etc as required and re-fixing in the same position after carry out the repairs works, and connecting complete all as specified and directed by Engr-in-Charge. Note:- Repairing such as rewinding, replacement of defective spare part, connecting wire, over hauling and painting etc will be measured & paid separately under subsequent items.

Material & labour for rewinding of ceiling fan of size 1200 mm sweep of any make by dismantling the ceiling fan, removing shaft, bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing and reassembling. Providing three core copper cable PVC insulated multistranded 0.5mm 30cm length for connection of fan from ceiling rose and testing of fan complete all as specified and directed by Engineer-in-Charge

Supply & fix in repair shaft for leathe work of any size suitable for ceiling fan of 1200 mm sweep complete all as specified and directed by Engineer in Charge.

Supply & fix in replacement ball bearing suitable for ceiling fan of 1200 mm sweep as approved complete all as specified and directed by Engr-in-Charge. .

Supply & fix in replacement capacitor 2.5 mfd 250 volts AC complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of ceiling fan PVC heavy duty capacitor clamp to hold the capacitor complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement only rubber reel, bolt & nut, including cotter pin etc complete all as specified and directed by Engr-in-Charge.

Material & labour for painting of ceiling fan including blades by scrapping of old paint, filling of cavities formed, preparation / cleaning of surface, making surface smooth and spray painting with one coat of white synthetic enameled paint of superior quality and writing MES /SM No with appropriate size letters using black paint complete all as specified and directed by Engr-in-Charge.

Supply & fixing in replacement of tamper proof single phase AC KWH meter 10-60 Amps with following features including sealing and sealing wire, Class – 1 accuracy as per IS 13779, 240V, 50HZ LCD display, Forward energy recording irrespective of current direction, LED indication for earth leakage, elegant polycarbonate enclosure High surge with stand up to 8 KV Anti temper feature. Measures & Displays kWh complete all as specified and directed by Engr-in-Charge. ( Note: Old unserviceable elect meter will be deposited in MES store yard).

Supply & fix in replacement metal clad enclosure pole and neutral with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and directed by Engr-in-Charge.

Supply & fixing in replacement of water heater storage type 25 Ltr, ratted wattage -2000 W, voltage: -230V, AC frequency (HZ): -50 phase: -single auto cutoff, rust proof external body suitable for highrise building suitable for water pressure head upto 8 bars star rating (BEE): -5 complete all as specified and directed by Engr-in-Charge. (Note: Old unserviceable Water Heater will be deposited in MES store yard).

Supply & fix in replacement of PVC body exhaust fan, AC single phase 230/240V of size 300 mm sweep with louvers including making hole of suitable size/ alteration to the existing hole to fix the exhaust fan complete all as specified and as directed by Engineer-in-Charge. (Note: Old unserviceable exhaust fan will be deposited in MES store yard).

All as per item No 169.00 here-in-before but PVC exhaust fan of size 250 mm sweep complete all as specified and as directed by Engineer-in-Charge.

All as per item No 169.00 here-in-before but metal exhaust fan of size 300 mm sweep complete all as specified and as directed by Engineer-in-Charge.

All as per item No 169.00 here-in-before but metal exhaust fan of size 250 mm sweep complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in replacement of PVC connection with brass nipple 15 mm x 450 mm long for geyser 25 ltrs capacity as per sample complete with one single pole MCB of 20 Amps complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement PVC plug top 16 Amps 3 Pin, single phase, 240 Volts complete all as specified and and directed by Engineer-in-Charge.

BHAVANI PROVISION STORES (BID ID -3331156)