REPAIRS TO ROAD AND RESURFACING TO ROAD INCLUDING ROAD FURNITURE IN DOMESTIC AREA AT NALIYA AND AF STATION MOTHALA UNDER GE (AF) NALIYA

Amount

M & L for repairs to pot holes any depth n.exc 1 sqm each including sweeping free from dust and mud, or water, scouring sunken surfaces, in roads paths etc cutting around edges to atleast 25mm in depth making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed by EIC.

M & L for repairs to pot holes exc 30mm depth but n.exc 1 sqm each including sweeping free from dust and mud, or water, scouring sunken surfaces, in roads paths etc cutting around edges to atleast 25mm in depth but making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) complete all as specified and directed by EIC.

M & L for premix bituminous, macadam using paving bitumen VG-30 penetration for minimum (consolidated thickness 75mm or less) with Min 4% binder content by weight of total mix (mix to be obtained from hot mix plant), laid by mechanical paver, levelled & rolled and compacted to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed by EIC. Note: The actual requirement of binder shall be as per the job mix design and the tests specified. However quantity of bitumen from the mix design found more than specified 4%, the same shall be provided with no extra cost to the Govt. In case binder content found to be less than 4% as per mix design as specified in Schedule "A", it shall be adjusted at the rate of Rs.46.90/kg for the less quantity of bitumen used. The quantity of 4% mentioned is exclusive of any wastage and no wastage shall be taken into account for the purpose of above adjustment.

M & L for preparing existing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer (using paving bitumen) VG-10 @5 Kg per 10 Sqm complete all as specified and directed.

M & L for applying evenly a priming/tack coat with bituminous primer (using paving bitumen) VG-10 @10 Kg per 10 Sqm complete all as specified and directed.

M & L for providing bituminous premix asphaltic semi dense concrete, 40mm (consolidated thickness) with 5.5% binder content VG 30, by weight of total mix, laid by mechanical paver and hot mix plant, levelled, rolled and compacted to required camber and gradient with 10 to 12 tonne capacity power roller to a uniform gradient and camber smooth surface as specified and as directed by Engineer-in-Charge. Note: The actual requirement of binder shall be as per the job mix design and the tests specified. However quantity of bitumen from the mix design found more than specified 5.5%, the same shall be provided with no extra cost to the Govt. In case binder content found to be less than 5.5% as per mix design as specified in Schedule "A", it shall be adjusted at the rate of Rs.46.90/kg for the less quantity of bitumen used. The quantity of 5.5% mentioned is exclusive of any wastage and no wastage shall be taken into account for the purpose of above adjustment.

Providing and applying 2.5mm thick and 125mm wide road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispensar, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc complete as per direction of Engineer-in-charge and accordance with applicable specifications. Make: Asian / Berger / Nerolac

Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below or above ground level) all as specified and as directed.

M & L for hardcore of broken stone or boulders gauge n.exc.63mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by EIC.

M & L for 100mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and as directed by Engineer-in-Charge.

M & L for 60mm thick machine pressed precast concrete interlocking paver block factory manufactured any shape and size confirming to IS 15658-2006 of M-35 Grade, without correction factor for chamfering, casted with grey cement and top layer with white cement and pigment casted in rubber mould with 0.50mm thick scratch proof lacquer coating on top laid dry in floor, pavement, etc over and including 25mm thick sand cushioning all as specified and directed.

S & F Distance informatory / Destination sign boards made out of 3 mm aluminium composite panels size 90 cm x 75 cm rectangular as per design of IRC- 67- 2010. Reflectorised with retro reflective high intensity micor prismatic poly carbonate sheeting as per latest MOST specifications, letters and numbers should be both side as per IRC-67-1986, 2.80 m long (2 Nos ) SS angle of 50 x 50 x 5 mm and NB 65 mm SS pipe as required. The details of Symbols for each board Size/Shape/Colour shall be as per the instruction of Engineer-in-Charge. The fixing at site shall be in (1:2:4) PCC block of size 45 x 45 x 60 cms for each leg including excavation curing etc, complete under the supervision of Engr-in-Charge. High intensite grade / prismatic ASTM type IV (Area of board only will be considered as area of each board for payment complete all as specified and directed by E-I-C.

M & L for providing and fixing post declinators made of ABS round body fitted with 02 nos 100mm dia high reflective relectors and mounted on MS pipe of 65mm dia duly powder coated anti rust anti theft steel to be installed as per direction of Engr-in-Charge. Make: Automate road safety/Shital Sign/any other ISI marked.

S & F road reflectors cat eyes both way of size 100 x 90mm fixing with epoxy of specified grade as per manufacturer's guidelines including taking out old existing unserviceable cat eyes all as directed by E-I-C. Make: 3M, Gogia Plastic or any ISI marked.

G.S.MAGO AND SONS CONSTRUCTION PVT.LTD

M/s. Shree Shakti Enterprise