Landscape on Airside City Side Roads of New Terminal Building at Vijayawada Airport. SH Electrical Works

Amount

Supply of following sizes of 1.1 KV grade, XLPE insulated, PVC sheathed,armoured, aluminium conductor power cable confirms to IS 7098(part -1) with up to date amendments etc complete as required (a) 3.5 x 120 sq.mm.

Supply of following sizes of 1.1 KV grade, XLPE insulated, PVC sheathed,armoured, aluminium conductor power cable confirms to IS 7098(part -1) with up to date amendments etc complete as required (a) 3.5 x 70 sq.mm.

Supply of following sizes of 1.1 KV grade, XLPE insulated, PVC sheathed,armoured, aluminium conductor power cable confirms to IS 7098(part -1) with up to date amendments etc complete as required (a) 4 x 16 sq.mm.

Supply of following sizes of 1.1 KV grade, PVC insulated, FR PVC Round sheathed, Copper conductor (flexible) industrial power cable confirms to IS 694 with up to date amendments etc complete as required (a) 3 x 2.5 sq.mm.

Supplying and laying of 90 mm outer dia and 76 mm inner dia double wall corrugated (DWC) HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930 part - II, complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Supplying and laying of 63 mm outer dia and 51 mm inner dia double wall corrugated (DWC) HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930 part - II, complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Supplying and laying of 50 mm outer dia and 38 mm inner dia double wall corrugated (DWC) HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930 part - II, complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Laying of one number PVC/XLPE insulated and PVC sheathed power cable of 1.1 KV grade of size above 95 sq.mm and upto 185 sq.mm in the existing RCC/Hume/STONEWARE/METAL pipe as required.

Laying of one number PVC/XLPE insulated and PVC sheathed power cable of 1.1 KV grade of size above 35 sq.mm and upto 95 sq.mm in the existing RCC/Hume/STONEWARE/METAL pipe as required.

Laying of one number PVC/XLPE insulated and PVC sheathed power cable of 1.1 KV grade of size upto 35 sq.mm in the existing RCC/Hume/STONEWARE/METAL pipe as required.

Supplying and making indoor end termination with brass compression gland and alluminium lugs for following sizes of PVC insulated, PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade etc as required. (a) 3.5 x 120 sq.mm (45 mm).

Supplying and making indoor end termination with brass compression gland and alluminium lugs for following sizes of PVC insulated, PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade etc as required. (a) 3.5 x 70 sq.mm (38 mm).

Supplying and making indoor end termination with brass compression gland and alluminium lugs for following sizes of PVC insulated, PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade etc as required. (a) 4 x 16 sq.mm (28 mm).

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

Design, Fabrication, Supply, Installation, Testing & Commissioning of free standing floor mounted out door type panel with sloped roof double door operational, bottom entry for incoming & outgoing cables, cubical type compartmentalised feeder pillar fabricated with 2mm CRCA sheettotally enclosed ,IP-54, of suitable size panel to accommodate all switchgear, including civil work 1:2:4 concrete foundation uniform width, suitable for use on 415V, 3 phase 4 wire, 50 Hz completely with,allumunium bus-bar of suitable size, angle frame for mounting with following switchgears and all accessories complete with interconnections as per enclosed specifications etc. as required. INCOMER :- 160 Amps, FP MCCB , Breaking Capacity 35 KA at 415 V, with neutral link, Ics = Icw = 100% ICU - 1 No. OUTGOING :- (i) 63 Amps, FP MCCB , Breaking Capacity 35 KA at 415 V, with neutral link, Ics = Icw = 100% ICU - 4 No. (ii) 32 Amps, FP MCCB , Breaking Capacity 35 KA at 415 V, with neutral link, Ics = Icw = 100% ICU - 4 No.

Design, Fabrication, Supply, Installation, Testing & Commissioning of free standing floor mounted out door type panel with sloped roof double door operational, bottom entry for incoming & outgoing cables, cubical type compartmentalised feeder pillar fabricated with 2mm CRCA sheettotally enclosed ,IP-54, of suitable size panel to accommodate all switchgear, including civil work 1:2:4 concrete foundation uniform width, suitable for use on 415V, 3 phase 4 wire, 50 Hz completely with,allumunium bus-bar of suitable size, angle frame for mounting with following switchgears and all accessories complete with interconnections as per enclosed specifications etc. as required. INCOMER :- 63 Amps, FP MCCB , Breaking Capacity 35 KA at 415 V, with neutral link, Ics = Icw = 100% ICU - 1 No. OUTGOING :- (i) 25 Amps, FP MCCB , Breaking Capacity 35 KA at 415 V, with neutral link, Ics = Icw = 100% ICU - 4 No.

Supply and fixing of outdoor type weather proof thermoplastic circuit breaker box with IP 65 protection, metric knockouts for cable entry, PE +N terminals,with all accessories etc, complete as required

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.

Making horizontal boring of size 160 mm dia for road crossing by adopting trenchless technology / HDD work through specialized pipe jacking method by erecting equipment to true to the alignment and gradient, by hydraulic pipe jacking technic complete including drawing / inserting HDPE pipe of 160 mm outer dia, excavation in all types of soils including hard rock etc., as directed by Engineer-In-Charge.

Supply of HDPE pipe confirming to IS 4984-1995 of size 160 mm outer dia including transportation and butt welding at site etc complete as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supply of 7 W LED Down Lighter (Adjustable) module with driver, Suitable housing etc complete as required. Make K-Lite (ID No: 8177) & (ID No: 7081) Trisha / Make Lustre, Model: Li-14033-9 or equivalent as per approval of E.I.C.

Supply of 7 W LED Trioscape Spike with integrated driver and LED etc complete as required. Make K-Lite (ID No: 7052) Trioscape - Spike / Make Lustre, Model: Li-70007-6 or equivalent as per approval of E.I.C.

Supply of 16 W LED Bollard with integrated driver and LED etc complete as required. Make K-Lite (ID No: 5582) Mushroom Bollard / Make Lustre, Model: Li-NM-724 or equivalent as per approval of E.I.C.

Supply of 8.5 W LED In Ground Luminaire with integrated driver and LED etc complete as required. Make K-Lite (ID No: 4091) In-Ground Luminaire / Make Lustre, Model: Li-72005-9 or equivalent as per approval of E.I.C.

Supply of 24 W LED Linear Wall Washer with integrated driver and LED etc complte as required. Make K-Lite (ID No: 3094) Linear wall wahser / Make Lustre, Model: Li-92024-36 or equivalent as per approval of E.I.C.

Supply of 60 W LED Decorative Post top lanthern with 4 Mtr pole, bracket, integrated driver and LED etc complte as required. Make Lustre, Model: Li-NM-725 or equivalent as per approval of E.I.C.

SITC of External Backlit Text Signage "VIJAYAWADA INTERNATIONAL AIRPORT" in three languages with exterior back light 3D Letters 3D Channel Letter on 1.5 mm thick 304 Stainless Steel with Matt Finish and to be cut using wwater jet cutting with raising letter 1.5 " depth channel letters, Direct fixing on Granite. - Letter Illumination: Samsung 1.12 Watt bright whith color LEDs (Full Letters) for brighter lighting From Back Side Logo. Job incoluding all cost of labour & materials complete as required.

Supply of 300Watt / suitable drivers for item No: 31

Providing and fixing flow solar studs of size 125 x 125 x 20 mm made of heavy duty body shall be moulded Aluminium Alloy and High Impact Polystyrene/Polycarbonate having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer in Charge the glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro reflective surface shall be 35 (+/-5) degree to base. The illuminated panels on both sides with at least 12 cm of illuminating area up each side. The luminance intencity should be as per the speicfications and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4:1973. The studs shall be fixed to the road surface using the adhesive confirming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineering In Charge.

SITC of RADAR Speed Alert Sign Board with variable messaging signs, operable at 230 V single phase AC supply, made of Aluminium protective cover with IP 65 protection, yellow colored high intensity prismatic reflective sheeting, tamper proof universal mounting arrangement suitable for mounting on street light pole, internal K band radar system (FCC certified), battery backup with battery level indication, buitin ambient light sensing and automatic brightness control, data storage with online data retrival, management and analysis compatable, integral camera for awareness and alert triggered images, etc., completre as required as per approval of EIC.

Supply of 40 Watt LED decorative luminaire integrally designed, housing made of pressure die cast aluminum, and specially formulated PC component injection molded diffuser ingress protection of IP 65 having efficiency more than 100 lumens/watt, complete with integral type high efficiency driver and dynamic lighting controller operating voltage of 170-250 Volts i/c suitable mounting accessories all as reqd & speicified. (Make: Philips, Model: BVP220 LED RGBW PC LILO or equivalent make with prior approval of E.I.C.)

Ruchira Associates

CHENNAI ENGINEERING SERVICES

Balaji Engineering