Providing stand by motors in Manginapudi CPWS Scheme of Machilipatnam Mandal Est Cost Rs:10.00 Lakhs

Design,Supply,Delivery,Erection,testing and commisioning of pumping Machinery (ISI) with all accessories,appurtenances,surge protection devices,ultrasonic flow meter on common delivery main at each pumping station piping as per design requirement.The tenderer shall operate and maintain the facilities during the trail run period.The tenderer shall include provision for spares for two years and for two years maintainenace.The Scope of the work includes electrical switch gear panels,electrical equipment connections including required cabling from pump starter panel to transformers,vaccum pumpsets with necessary piping etc.,for priming centrifugal pumps,crane wherever necessary,fire safety equipment,ventilation system,electrical safety system etc.., for finished item of work including all taxes,duties etc.complete and Motors in Clear water sump for filling Clear water from Sump to OHSR with Head-18-38 mts and LPM-1250 (Approx-12.5 HP) OPEN WELL Horizontal Submersible Pumpset including Contractor's Profit @ 13.615% for Horizontal Submersible Pumpset

Supply delivery installation commissioning of Centrifugal Mono Block pump set with Single Phase Motor 230 V (-15%+10% range ( - ) 50 HZ with class "F"insulation , of reputed make with ISI make with minimum overall effciency of 75 % at the duty point including cost convenyance of pump set pannel board with accessories and presure guage wth necessary equipment as per specfication along with 15 Mts length of GI pipe medium class (suction=6mts Delivery = 9Mts) with required no of "C" class bends couplings flanges etc, with 30 Mts length of Suitable copper wire of single run as per IS specifications of reputed make encasing in flexible pipe of 10 Mts length from pempset to pannel board and 75 M length of single run of Suitable Aluminem service wire of ISI make including supporting GI wire and cleats one no.of GM gate valve as per IS 778/84 of Suitable size installation and erection of pupm set including foundation bolts and nuts of 25 mm dia and above of sutiable size over a cement concrete bed in C.C (1:2:4) of sutiable size as directed the department fixing panal bord and pumpsets with all accessoriesPipes valves. specials, earthin as per APSEB Specifications etc complete and testing and commissioning of pump set with a trial urn of 15 (fifeen) days incliding cost conveyance erection of pump set with all accessoris, spedials, vaves pipes cable etc complete and Suitable for 18-21 Mts head and 275 to 210 required LPM , 5.00 HP Monoblock ,Three Phase Approved Rate including Overheads & C.Profit @13.615% for 5.00 HP Centrifugal Mono Block pump set.

Supply delivery installation commissioning of Centrifugal Mono Block pump set with Single Phase Motor 230 V (-15%+10% range ( - ) 50 HZ with class "F"insulation , of reputed make with ISI make with minimum overall effciency of 75 % at the duty point including cost convenyance of pump set pannel board with accessories and presure guage wth necessary equipment as per specfication along with 15 Mts length of GI pipe medium class (suction=6mts Delivery = 9Mts) with required no of "C" class bends couplings flanges etc, with 30 Mts length of Suitable copper wire of single run as per IS specifications of reputed make encasing in flexible pipe of 10 Mts length from pempset to pannel board and 75 M length of single run of Suitable Aluminem service wire of ISI make including supporting GI wire and cleats one no.of GM gate valve as per IS 778/84 of Suitable size installation and erection of pupm set including foundation bolts and nuts of 25 mm dia and above of sutiable size over a cement concrete bed in C.C (1:2:4) of sutiable size as directed the department fixing panal bord and pumpsets with all accessoriesPipes valves. specials, earthin as per APSEB Specifications etc complete and testing and commissioning of pump set with a trial urn of 15 (fifeen) days incliding cost conveyance erection of pump set with all accessoris, spedials, vaves pipes cable etc complete and Suitable for 18-21 Mts head and 275 to 210 required LPM , 5.00 HP Monoblock ,Three Phase Approved Rate including Overheads & C.Profit @13.615% for 5.00 HP Centrifugal Mono Block pump set.Cost and Supply of 200 mm dia DI Sluice Valve 1.6 MPA

Supply delivery installation commissioning of Centrifugal Mono Block pump set with Single Phase Motor 230 V (-15%+10% range ( - ) 50 HZ with class "F"insulation , of reputed make with ISI make with minimum overall effciency of 75 % at the duty point including cost convenyance of pump set pannel board with accessories and presure guage wth necessary equipment as per specfication along with 15 Mts length of GI pipe medium class (suction=6mts Delivery = 9Mts) with required no of "C" class bends couplings flanges etc, with 30 Mts length of Suitable copper wire of single run as per IS specifications of reputed make encasing in flexible pipe of 10 Mts length from pempset to pannel board and 75 M length of single run of Suitable Aluminem service wire of ISI make including supporting GI wire and cleats one no.of GM gate valve as per IS 778/84 of Suitable size installation and erection of pupm set including foundation bolts and nuts of 25 mm dia and above of sutiable size over a cement concrete bed in C.C (1:2:4) of sutiable size as directed the department fixing panal bord and pumpsets with all accessoriesPipes valves. specials, earthin as per APSEB Specifications etc complete and testing and commissioning of pump set with a trial urn of 15 (fifeen) days incliding cost conveyance erection of pump set with all accessoris, spedials, vaves pipes cable etc complete and Suitable for 18-21 Mts head and 275 to 210 required LPM , 5.00 HP Monoblock ,Three Phase Approved Rate including Overheads & C.Profit @13.615% for 5.00 HP Centrifugal Mono Block pump set.Cost and Supply of 200 mm dia CI 0.60 Mtrs D/F Pipe

Supply delivery installation commissioning of Centrifugal Mono Block pump set with Single Phase Motor 230 V (-15%+10% range ( - ) 50 HZ with class "F"insulation , of reputed make with ISI make with minimum overall effciency of 75 % at the duty point including cost convenyance of pump set pannel board with accessories and presure guage wth necessary equipment as per specfication along with 15 Mts length of GI pipe medium class (suction=6mts Delivery = 9Mts) with required no of "C" class bends couplings flanges etc, with 30 Mts length of Suitable copper wire of single run as per IS specifications of reputed make encasing in flexible pipe of 10 Mts length from pempset to pannel board and 75 M length of single run of Suitable Aluminem service wire of ISI make including supporting GI wire and cleats one no.of GM gate valve as per IS 778/84 of Suitable size installation and erection of pupm set including foundation bolts and nuts of 25 mm dia and above of sutiable size over a cement concrete bed in C.C (1:2:4) of sutiable size as directed the department fixing panal bord and pumpsets with all accessoriesPipes valves. specials, earthin as per APSEB Specifications etc complete and testing and commissioning of pump set with a trial urn of 15 (fifeen) days incliding cost conveyance erection of pump set with all accessoris, spedials, vaves pipes cable etc complete and Suitable for 18-21 Mts head and 275 to 210 required LPM , 5.00 HP Monoblock ,Three Phase Approved Rate including Overheads & C.Profit @13.615% for 5.00 HP Centrifugal Mono Block pump set. Cost and Supply of 200 mm dia CI 0.60 Mtrs Tailpiece

Supply delivery installation commissioning of Centrifugal Mono Block pump set with Single Phase Motor 230 V (-15%+10% range ( - ) 50 HZ with class "F"insulation , of reputed make with ISI make with minimum overall effciency of 75 % at the duty point including cost convenyance of pump set pannel board with accessories and presure guage wth necessary equipment as per specfication along with 15 Mts length of GI pipe medium class (suction=6mts Delivery = 9Mts) with required no of "C" class bends couplings flanges etc, with 30 Mts length of Suitable copper wire of single run as per IS specifications of reputed make encasing in flexible pipe of 10 Mts length from pempset to pannel board and 75 M length of single run of Suitable Aluminem service wire of ISI make including supporting GI wire and cleats one no.of GM gate valve as per IS 778/84 of Suitable size installation and erection of pupm set including foundation bolts and nuts of 25 mm dia and above of sutiable size over a cement concrete bed in C.C (1:2:4) of sutiable size as directed the department fixing panal bord and pumpsets with all accessoriesPipes valves. specials, earthin as per APSEB Specifications etc complete and testing and commissioning of pump set with a trial urn of 15 (fifeen) days incliding cost conveyance erection of pump set with all accessoris, spedials, vaves pipes cable etc complete and Suitable for 18-21 Mts head and 275 to 210 required LPM , 5.00 HP Monoblock ,Three Phase Approved Rate including Overheads & C.Profit @13.615% for 5.00 HP Centrifugal Mono Block pump set.Cost and Supply of 16 X 125 mm dia Bolts & Nuts

Supply delivery installation commissioning of Centrifugal Mono Block pump set with Single Phase Motor 230 V (-15%+10% range ( - ) 50 HZ with class "F"insulation , of reputed make with ISI make with minimum overall effciency of 75 % at the duty point including cost convenyance of pump set pannel board with accessories and presure guage wth necessary equipment as per specfication along with 15 Mts length of GI pipe medium class (suction=6mts Delivery = 9Mts) with required no of "C" class bends couplings flanges etc, with 30 Mts length of Suitable copper wire of single run as per IS specifications of reputed make encasing in flexible pipe of 10 Mts length from pempset to pannel board and 75 M length of single run of Suitable Aluminem service wire of ISI make including supporting GI wire and cleats one no.of GM gate valve as per IS 778/84 of Suitable size installation and erection of pupm set including foundation bolts and nuts of 25 mm dia and above of sutiable size over a cement concrete bed in C.C (1:2:4) of sutiable size as directed the department fixing panal bord and pumpsets with all accessoriesPipes valves. specials, earthin as per APSEB Specifications etc complete and testing and commissioning of pump set with a trial urn of 15 (fifeen) days incliding cost conveyance erection of pump set with all accessoris, spedials, vaves pipes cable etc complete and Suitable for 18-21 Mts head and 275 to 210 required LPM , 5.00 HP Monoblock ,Three Phase Approved Rate including Overheads & C.Profit @13.615% for 5.00 HP Centrifugal Mono Block pump set.Cost and Supply of Rubber Packing Sheet

Supply delivery installation commissioning of Open well Submersible pump set with Three Phase Motor 400 V (-15%+10% range ( - ) 50 HZ with class "F"insulation , of reputed make with ISI make with minimum overall effciency of 75 % at the duty point including cost convenyance of pump set pannel board with accessories and presure guage wth necessary equipment as per specfication along with 15 Mts length of GI pipe medium class (suction=6mts Delivery = 9Mts) with required no of "C" class bends couplings flanges etc, with 30 Mts length of Suitable copper wire of single run as per IS specifications of reputed make encasing in flexible pipe of 10 Mts length from pempset to pannel board and 75 M length of single run of Suitable Aluminem service wire of ISI make including supporting GI wire and cleats one no.of GM gate valve as per IS 778/84 of Suitable size installation and erection of pupm set including foundation bolts and nuts of 25 mm dia and above of sutiable size over a cement concrete bed in C.C (1:2:4) of sutiable size as directed the department fixing panal bord and pumpsets with all accessoriesPipes valves. specials, earthin as per APSEB Specifications etc complete and testing and commissioning of pump set with a trial urn of 15 (fifeen) days incliding cost conveyance erection of pump set with all accessoris, spedials, vaves pipes cable etc complete and Suitable for 39-54 Mts head and 510 to 350 required LPM , 10.00 HP Submercible,Three Phase-Approved Rate including Contractor's Profit @ 13.615% for 10.00 HP Submercible Motor