Construction of the boundary wall of the Roorkee Municipal Corporation office.

1 Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

2 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m

3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 1:4:8 (1 Cement as 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal

4 Brick work with common burnt clay FPS (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand) Rate Section as per D.S.R. 2023 SI.NO. 6.1.2

5 Brick work with common burnt clay FPS (non modular) bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 16 (1) cement: 6 coarse sand

6 12 mm thick plaster with cement mortar consisting of Ipart cement and 3 part of approved coarse sand Minimum thickness not to be less then 10 mm. including supply of all material, labour and T & Pete reqiured for proper

7 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 cement.. 2 coarse sand (zone-III) derived from natural sources. 4 graded stone aggregate 12.5 mm nominal size derived from natural sources)

8 Provitang and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare

9 Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 1tr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm

10 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required all complete